Printable version

Drivers & software

* RECOMMENDED * HPE OmniStack Firmware

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware (Entitlement Required)
Version: 2019.0903(3 Sep 2019)
Operating System(s): OS Independent
Multi-part download
File name: 790-000107-LSI-m.iso (445 MB)
File name: 790-000107-LSI-m.iso.md5 (55 Bytes)
File name: 790-000107-LSI-m.iso.sha1 (63 Bytes)
File name: 790-000107-LSI-m.iso.sha256 (87 Bytes)
File name: 790-000107-LSI-m.iso.sig (287 Bytes)
File name: SVTSP-2019_0903.01.html (12 KB)
File name: SVTSP-2019_0903.01.iso (1.0 GB)
File name: SVTSP-2019_0903.01.iso.md5 (57 Bytes)
File name: SVTSP-2019_0903.01.iso.sha1 (65 Bytes)
File name: SVTSP-2019_0903.01.iso.sha256 (89 Bytes)
File name: SVTSP-2019_0903.01.iso.sig (287 Bytes)
The HPE OmniStack Firmware update is a comprehensive firmware update solution comprised of two bootable images. The HPE SimpliVity Support Pack provides a comprehensive firmware update for all HPE SimpliVity Gen9 and Gen10 servers. The HPE SimpliVity Support Pack along with the HPE SimpliVity 380 Gen9 Controller Update provides a comprehensive firmware update for the HPE SimpliVity 380 Gen9 servers. For additional information refer to the Interoperability Guide: http://www.hpe.com/docs/simplivity-interop

Support for the HPE SimpliVity 325 Gen10.

Prerequisites:

System must be in mantainance mode before booting this ISO.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8445eee36c842f615283224ff9f2dceeb442b1b959ce3b0546091974f13ab541 790-000107-LSI-m.iso.sha1
140bd20a8d0a68ab76ae5795fba2831e77e108245710b57f3866b0207380ef11 SVTSP-2019_0903.01.html
c0a49aeb2baccdff824cc9f23d42a00cd029779bbc1770086f74879f8fbf058c SVTSP-2019_0903.01.iso.sha1
f72b0d77273a38da6e77056a6928a2fd61ab485e5936fdd5e73f021234b30e01 790-000107-LSI-m.iso
5cf6f47d3ab4b343e8bfe5828a5ccb8c574d58989e15f20c85d7241e6a38cc14 SVTSP-2019_0903.01.iso
bd931ff8cb2718ee65b56fa54526ffcd0a7e7d2e9833b84a656232adadd32553 SVTSP-2019_0903.01.iso.sig
b73db795aae9ee5199745027b412c1587ed57e8fdc1c4ca0311be3f6ca9df529 SVTSP-2019_0903.01.iso.sha256
847dac0cbfc6a8ac46f20b75bc82733f1fceb187c8ddf1c4ac9eff440fe9340b SVTSP-2019_0903.01.iso.md5
8fa0df8757c2eefc2327ed8970133a83792cdb383e03c7a902562e5aedf34f31 790-000107-LSI-m.iso.sig
e93649970c8d01247b2a8f9f7838fc1e51d6a78559ff73fbbecf75368b3846c3 790-000107-LSI-m.iso.md5
aa844db11f9a661ab1a4bce4d918b29168e50e802ef383e0650e8f634248efb1 790-000107-LSI-m.iso.sha256

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

For detailed information on the firmware and software interdependencies for HPE SimpliVity appliances refer to appropriate platform Interoperability Guide

For HPE SimpliVity 380 Gen9 

The HPE SimpliVity 380 Gen9 operates in Legacy boot mode only.  All updates should be performed without changing the BIOS boot mode.  Prior to performing any update the system must be in maintenance mode.  Updating the firmware on the SimpliVity 380 Gen9 requires two steps. For specific instructions refer to the appropriate section of the HPE SimpliVity OmniStack Interoperability Guide

  1. To update the data storage controller and drives boot the system using 790-000107-LSI-m.iso.  At the command prompt run the following commands in order:
    • sudo su –
    • ./update_fw
    • A system reboot is required to complete this phase of the firmware update.
  2. To update the remaining components follow the process in the next section.

For all HPE SimpliVity Gen9 and Gen10 products

To update the components boot the system using SVTSP-2019_0903.01.iso (Offline mode).  Use of Automatic mode is recommended to complete the installation1.

  • Automatic mode - Firmware components will be updated without interaction (including reboot)
  • Interactive mode - Follow the onscreen steps to update firmware components

Booting the ISO will default to Automatic mode if no choice is made from the boot menu.

1 If the system contains a TPM, both Interactive and Automatic upgrades will require interaction to update all components.

For legacy SimpliVity platforms:

To upgrade firmware for these systems, please see specific platform manufacturer's support site to obtain their supported firmware.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

These images support the current shipping HPE SimpliVity platforms.

To upgrade the firmware on legacy SimpliVity platforms please see specific platform manufacturer's support site to obtain their supported firmware. For specific information refer to the appropriate platform Interoperability Guide.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide

Notes:

This release provides firmware updates for the HPE SimpliVity platforms and options.  The following important updates are included:

Category Description Upgrade Requirement Version
Firmware - Network HPE Firmware Flash for Emulex Converged Network Adapters for Linux (x64) 2019.03.01 Recommended
Firmware - Storage Fibre Channel HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for Linux (x64) 2019.03.02 Recommended
Firmware - Storage Fibre Channel HPE Firmware Flash for QLogic Fibre Channel Host Bus Adapters - Linux (x86_64) 2019.03.02 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK0240GEPQN, VK0480GEPQP, and VK0960GEPQQ Drives HPG1 Rev. D Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB8000JFECQ Drives HPD7 Rev. B Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8 Critical
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000150GWCNN, VK000240GWCNP, VK000480GWCNQ, VK000960GWCNR and VK001600GWCNT Drives HPG1 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MK000240GWCEU, MK000480GWCEV, MK000960GWCFA and MK001920GWCFB Drives HPG3 Rev. B Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8 Critical
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK0120GFDKE, VK0240GFDKF, VK0480GFDKH, VK0960GFDKK, VK1920GFDKL, and VK3840GFDKN Drives HPG1 Rev. E Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG000600JWEBH and EG000300JWEBF Drives HPD4 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300JFCKA, EG0600JEMCV, EG0900JFCKB, and EG1200JEMDA Drives HPD6 Rev. D Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. C Critical
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000JVYZL, MB2000JVYZN, MB3000JVYZP and MB4000JVYZQ Drives HPD3 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG000300JWFVB Drives HPD2 Rev. B Optional
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB002000JWFVN and MB004000JWFVP Drives HPD2 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWSRQ, VK000480GWSRR, VK000960GWSRT, VK001920GWSRU and VK003840GWSRV Drives HPG1 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB6000JVYZD and MB4000JVYZC Drives HPD4 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWCFD, VK000480GWCFE, VK000960GWCFF, VK001920GWCFH and VK003840GWCFK Drives. HPG3 Rev. B Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB004000JWFVK and MB006000JWFVL Drives HPD2 Recommended
Firmware - System Online ROM Flash for Linux - HPE Gen10 Innovation Engine Firmware for HPE Gen10 Servers 0.2.0.11 Optional
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.70 Recommended
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.44 Recommended
Firmware - Network HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64 1.5.11 Optional
Firmware - Network HPE Broadcom NX1 Online Firmware Upgrade Utility for Linux x86_64 2.23.10 Optional
Firmware - Network HPE Intel Online Firmware Upgrade Utility for Linux x86_64 1.17.17 Rev. B Optional
Firmware - Network Online Firmware Upgrade Utility (Linux x86_64) for HPE Mellanox Ethernet only adapters 1.0.9 Rev. A Recommended
Firmware - Network HPE QLogic FastLinQ Online Firmware Upgrade Utility for Linux x86_64 1.6.50 Optional
Firmware - Network HPE QLogic NX2 Online Firmware Upgrade Utility for Linux x86_64 2.25.9 Optional
Firmware - System Online Flash Component for Linux - Gen10 NVMe Backplane PIC Firmware 1.20 Rev. E Optional
Firmware - Power Management Online ROM Flash for Linux - Advanced Power Capping Microcontroller Firmware for HPE Gen10 Servers 1.0.4 Rev. D Optional
Firmware - Power Management Online ROM Flash for Linux - Advanced Power Capping Microcontroller Firmware for HPE Gen9 Servers 1.0.9 Rev. J Optional
Firmware - Power Management Online Power Supply Flash Component for Linux - HPE Flexible Slot Power Supplies 2018.06.21 Recommended
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) – HPE 12Gb/s SAS Expander Firmware for HPE Smart Array Controllers and HPE HBA Controllers 4.21 Optional
Firmware - Storage Controller Online ROM Flash Component for Linux (x64) – HPE Apollo 2000 Gen10 Backplane Expander Firmware 1.00 Rev. B Optional
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array and Smart HBA H240ar, H240nr, H240, H241, H244br, P240nr, P244br, P246br, P440ar, P440, P441, P542D, P741m, P840, P840ar, and P841 6.88 Recommended
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408i-sb, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.98Recommended
Firmware - System Online ROM Flash for Linux - Server Platform Services (SPS) Firmware for HPE Gen10 Servers 04.01.04.251 Optional
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL325 Gen10 (A41) Servers 1.40_01-25-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.72_03-25-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 2.04_04-18-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 2.04_04-18-2019 Recommended
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B Critical

Supported Devices and Features:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 325 Gen10
  • HPE SimpliVity 2600

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS).  This includes support for mitigating the following vulnerabilities: 

  • CVE-2018-12126 – Microarchitectural Store Buffer Data Sampling
  • CVE-2018-12130 – Microarchitectural Fill Buffer Data Sampling
  • CVE-2018-12127 – Microarchitectural Load Port Data Sampling
  • CVE-2019-11091 – Microarchitectural Data Sampling Uncacheable Memory. 

Includes the latest revision of the Intel Reference code support that provides mitigations for a variety of security vulnerabilities, including:

  • CVE-2019-0119
  • CVE-2019-0126

These issues are not unique to HPE servers.  Note that MDS is addressed in hardware for systems utilizing the Intel Second Generation Intel Xeon Scalable Processors.

Updates to address HPESBHF03917 are also included. 

For the latest security bulletins and vulnerabilities, please refer to the Hewlett Packard Enterprise Support Center Security Bulletin Archive

These images support the current shipping HPE SimpliVity platforms.

To upgrade the firmware on legacy SimpliVity platforms please see specific platform manufacturer's support site to obtain their supported firmware. For specific information refer to the appropriate platform Interoperability Guide.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide
Version:2019.0903 (3 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS).  This includes support for mitigating the following vulnerabilities: 

  • CVE-2018-12126 – Microarchitectural Store Buffer Data Sampling
  • CVE-2018-12130 – Microarchitectural Fill Buffer Data Sampling
  • CVE-2018-12127 – Microarchitectural Load Port Data Sampling
  • CVE-2019-11091 – Microarchitectural Data Sampling Uncacheable Memory. 

Includes the latest revision of the Intel Reference code support that provides mitigations for a variety of security vulnerabilities, including:

  • CVE-2019-0119
  • CVE-2019-0126

These issues are not unique to HPE servers.  Note that MDS is addressed in hardware for systems utilizing the Intel Second Generation Intel Xeon Scalable Processors.

Updates to address HPESBHF03917 are also included. 

For the latest security bulletins and vulnerabilities, please refer to the Hewlett Packard Enterprise Support Center Security Bulletin Archive

Enhancements

Support for the HPE SimpliVity 325 Gen10.


Version:3.7.9 (21 Jun 2019)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the HPE SimpliVity platforms and options.  The following important updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. C
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.62
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array and Smart HBA H240ar, H240nr, H240, H241, H244br, P240nr, P244br, P246br, P440ar, P440, P441, P542D, P741m, P840, P840ar, and P841 6.88
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408i-sb, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.98
Firmware - System Online ROM Flash for Linux - Server Platform Services (SPS) Firmware for HPE Gen10 Servers 04.01.04.251
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.70_12-29-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 2.02_03-19-2019
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 2.02_03-19-2019
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.8 (25 Mar 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following important updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.64 2018-10-17
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.46 2018-10-02
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.46 2018-10-11
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.61
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.39
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Firmware - Storage Controller Online ROM Flash Component for Linux - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.66
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.7 (21 Dec 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following critical updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.60_05-21-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.42_06-20-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.42_06-23-2018
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.61
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.35
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Firmware - Storage Controller Online ROM Flash Component for Linux - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.66
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.6 (14 Sep 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following critical updates are included:

Product Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD,VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK,MK000240GWKVK,MK000480GWJPN,MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.30
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.60_05-21-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.42_06-20-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.42_06-23-2018
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.60
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.5 (12 Jun 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides critical System and Drive Firmware updates for the SimpliVity 380 Gen9 and SimpliVity 380 Gen10 platforms and options.

Enhancements

This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.4 (9 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


No new firmware ISO was released for the HPE OmniStack Firmware 3.7.4. 

Please use HPE OmniStack Firmware iso 3.7.3 in conjunction with OmniStack Software version 3.7.4. 

If system was previously updated with OmniStack Firmware 3.7.3, there is no need to update to the OmniStack Firmware 3.7.4  

Direct link to OmniStack Firmware 3.7.3: https://www.hpe.com/global/swpublishing/MTX-0ff0f0a1e7264daf879ba7b48d

Enhancements

This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.3 (15 Mar 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This release of HPE OmniStack software fixes these issues.

Category Description
Backup

Remote backups resume after extended outages between datacenters or clusters

Deployment

HPE SimpliVity 380 Gen10 servers that use an Ethernet 10Gb 2P 530SFP+ adapter no longer fail during deployment after the hypervisor writes to the boot drive and the host restarts. The deployment process finishes as expected.

Hardware

HPE SimpliVity 380 Gen10 servers take extended time to reboot.

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.2 (10 Jan 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This release of HPE OmniStack software fixes these issues.

 

Category

Description

Backup

• If you have two or more clusters that contain datastores with the same name, backup restore operations can fail

• Remote backups resume after extended outages between datacenters or clusters

Deployment

When the HPE SimpliVity Installer is running, and the network connection fails, the Virtual Controller fails to deploy.

General restrictions and known issues

Database transaction counter overflow produces system core

Hardware

SSD Array Critical and SSD Array Warning alarms displayed simultaneously in an HPE SimpliVity 380 Gen10 Raid6 configuration.

Performance

Virtual Controller became unresponsive and virtual machines and datastores became inaccessible. SSH connection to the Virtual Controller timed out. You needed to restart the host to recover the connection.

Upgrade

• Upgrade Manager now allows the use of an asterisk symbol ("*") as part of a login password string.

• Unable to create replica, could not transfer upgrade package

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 Gen9 and HPE SimpliVity 380 Gen10 platforms and options.


Version:3.7.1 (18 Sep 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 Gen9 and HPE SimpliVity 380 Gen10 platforms and options.


Version:3.7.0(A) (17 Jul 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 HPE Gen9 platforms and options.


Type: Firmware (Entitlement Required)
Version: 2019.0903(3 Sep 2019)
Operating System(s):
OS Independent

Description

The HPE OmniStack Firmware update is a comprehensive firmware update solution comprised of two bootable images. The HPE SimpliVity Support Pack provides a comprehensive firmware update for all HPE SimpliVity Gen9 and Gen10 servers. The HPE SimpliVity Support Pack along with the HPE SimpliVity 380 Gen9 Controller Update provides a comprehensive firmware update for the HPE SimpliVity 380 Gen9 servers. For additional information refer to the Interoperability Guide: http://www.hpe.com/docs/simplivity-interop

Enhancements

Support for the HPE SimpliVity 325 Gen10.

Installation Instructions

Prerequisites:

System must be in mantainance mode before booting this ISO.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8445eee36c842f615283224ff9f2dceeb442b1b959ce3b0546091974f13ab541 790-000107-LSI-m.iso.sha1
140bd20a8d0a68ab76ae5795fba2831e77e108245710b57f3866b0207380ef11 SVTSP-2019_0903.01.html
c0a49aeb2baccdff824cc9f23d42a00cd029779bbc1770086f74879f8fbf058c SVTSP-2019_0903.01.iso.sha1
f72b0d77273a38da6e77056a6928a2fd61ab485e5936fdd5e73f021234b30e01 790-000107-LSI-m.iso
5cf6f47d3ab4b343e8bfe5828a5ccb8c574d58989e15f20c85d7241e6a38cc14 SVTSP-2019_0903.01.iso
bd931ff8cb2718ee65b56fa54526ffcd0a7e7d2e9833b84a656232adadd32553 SVTSP-2019_0903.01.iso.sig
b73db795aae9ee5199745027b412c1587ed57e8fdc1c4ca0311be3f6ca9df529 SVTSP-2019_0903.01.iso.sha256
847dac0cbfc6a8ac46f20b75bc82733f1fceb187c8ddf1c4ac9eff440fe9340b SVTSP-2019_0903.01.iso.md5
8fa0df8757c2eefc2327ed8970133a83792cdb383e03c7a902562e5aedf34f31 790-000107-LSI-m.iso.sig
e93649970c8d01247b2a8f9f7838fc1e51d6a78559ff73fbbecf75368b3846c3 790-000107-LSI-m.iso.md5
aa844db11f9a661ab1a4bce4d918b29168e50e802ef383e0650e8f634248efb1 790-000107-LSI-m.iso.sha256

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

For detailed information on the firmware and software interdependencies for HPE SimpliVity appliances refer to appropriate platform Interoperability Guide

For HPE SimpliVity 380 Gen9 

The HPE SimpliVity 380 Gen9 operates in Legacy boot mode only.  All updates should be performed without changing the BIOS boot mode.  Prior to performing any update the system must be in maintenance mode.  Updating the firmware on the SimpliVity 380 Gen9 requires two steps. For specific instructions refer to the appropriate section of the HPE SimpliVity OmniStack Interoperability Guide

  1. To update the data storage controller and drives boot the system using 790-000107-LSI-m.iso.  At the command prompt run the following commands in order:
    • sudo su –
    • ./update_fw
    • A system reboot is required to complete this phase of the firmware update.
  2. To update the remaining components follow the process in the next section.

For all HPE SimpliVity Gen9 and Gen10 products

To update the components boot the system using SVTSP-2019_0903.01.iso (Offline mode).  Use of Automatic mode is recommended to complete the installation1.

  • Automatic mode - Firmware components will be updated without interaction (including reboot)
  • Interactive mode - Follow the onscreen steps to update firmware components

Booting the ISO will default to Automatic mode if no choice is made from the boot menu.

1 If the system contains a TPM, both Interactive and Automatic upgrades will require interaction to update all components.

For legacy SimpliVity platforms:

To upgrade firmware for these systems, please see specific platform manufacturer's support site to obtain their supported firmware.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide

Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

These images support the current shipping HPE SimpliVity platforms.

To upgrade the firmware on legacy SimpliVity platforms please see specific platform manufacturer's support site to obtain their supported firmware. For specific information refer to the appropriate platform Interoperability Guide.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide

Notes:

This release provides firmware updates for the HPE SimpliVity platforms and options.  The following important updates are included:

Category Description Upgrade Requirement Version
Firmware - Network HPE Firmware Flash for Emulex Converged Network Adapters for Linux (x64) 2019.03.01 Recommended
Firmware - Storage Fibre Channel HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for Linux (x64) 2019.03.02 Recommended
Firmware - Storage Fibre Channel HPE Firmware Flash for QLogic Fibre Channel Host Bus Adapters - Linux (x86_64) 2019.03.02 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK0240GEPQN, VK0480GEPQP, and VK0960GEPQQ Drives HPG1 Rev. D Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB8000JFECQ Drives HPD7 Rev. B Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8 Critical
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000150GWCNN, VK000240GWCNP, VK000480GWCNQ, VK000960GWCNR and VK001600GWCNT Drives HPG1 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MK000240GWCEU, MK000480GWCEV, MK000960GWCFA and MK001920GWCFB Drives HPG3 Rev. B Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8 Critical
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK0120GFDKE, VK0240GFDKF, VK0480GFDKH, VK0960GFDKK, VK1920GFDKL, and VK3840GFDKN Drives HPG1 Rev. E Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG000600JWEBH and EG000300JWEBF Drives HPD4 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300JFCKA, EG0600JEMCV, EG0900JFCKB, and EG1200JEMDA Drives HPD6 Rev. D Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. C Critical
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000JVYZL, MB2000JVYZN, MB3000JVYZP and MB4000JVYZQ Drives HPD3 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - EG000300JWFVB Drives HPD2 Rev. B Optional
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB002000JWFVN and MB004000JWFVP Drives HPD2 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWSRQ, VK000480GWSRR, VK000960GWSRT, VK001920GWSRU and VK003840GWSRV Drives HPG1 Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB6000JVYZD and MB4000JVYZC Drives HPD4 Recommended
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWCFD, VK000480GWCFE, VK000960GWCFF, VK001920GWCFH and VK003840GWCFK Drives. HPG3 Rev. B Recommended
Firmware - SAS Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MB004000JWFVK and MB006000JWFVL Drives HPD2 Recommended
Firmware - System Online ROM Flash for Linux - HPE Gen10 Innovation Engine Firmware for HPE Gen10 Servers 0.2.0.11 Optional
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.70 Recommended
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.44 Recommended
Firmware - Network HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64 1.5.11 Optional
Firmware - Network HPE Broadcom NX1 Online Firmware Upgrade Utility for Linux x86_64 2.23.10 Optional
Firmware - Network HPE Intel Online Firmware Upgrade Utility for Linux x86_64 1.17.17 Rev. B Optional
Firmware - Network Online Firmware Upgrade Utility (Linux x86_64) for HPE Mellanox Ethernet only adapters 1.0.9 Rev. A Recommended
Firmware - Network HPE QLogic FastLinQ Online Firmware Upgrade Utility for Linux x86_64 1.6.50 Optional
Firmware - Network HPE QLogic NX2 Online Firmware Upgrade Utility for Linux x86_64 2.25.9 Optional
Firmware - System Online Flash Component for Linux - Gen10 NVMe Backplane PIC Firmware 1.20 Rev. E Optional
Firmware - Power Management Online ROM Flash for Linux - Advanced Power Capping Microcontroller Firmware for HPE Gen10 Servers 1.0.4 Rev. D Optional
Firmware - Power Management Online ROM Flash for Linux - Advanced Power Capping Microcontroller Firmware for HPE Gen9 Servers 1.0.9 Rev. J Optional
Firmware - Power Management Online Power Supply Flash Component for Linux - HPE Flexible Slot Power Supplies 2018.06.21 Recommended
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) – HPE 12Gb/s SAS Expander Firmware for HPE Smart Array Controllers and HPE HBA Controllers 4.21 Optional
Firmware - Storage Controller Online ROM Flash Component for Linux (x64) – HPE Apollo 2000 Gen10 Backplane Expander Firmware 1.00 Rev. B Optional
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array and Smart HBA H240ar, H240nr, H240, H241, H244br, P240nr, P244br, P246br, P440ar, P440, P441, P542D, P741m, P840, P840ar, and P841 6.88 Recommended
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408i-sb, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.98Recommended
Firmware - System Online ROM Flash for Linux - Server Platform Services (SPS) Firmware for HPE Gen10 Servers 04.01.04.251 Optional
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL325 Gen10 (A41) Servers 1.40_01-25-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.72_03-25-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 2.04_04-18-2019 Recommended
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 2.04_04-18-2019 Recommended
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B Critical

Supported Devices and Features:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 325 Gen10
  • HPE SimpliVity 2600

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS).  This includes support for mitigating the following vulnerabilities: 

  • CVE-2018-12126 – Microarchitectural Store Buffer Data Sampling
  • CVE-2018-12130 – Microarchitectural Fill Buffer Data Sampling
  • CVE-2018-12127 – Microarchitectural Load Port Data Sampling
  • CVE-2019-11091 – Microarchitectural Data Sampling Uncacheable Memory. 

Includes the latest revision of the Intel Reference code support that provides mitigations for a variety of security vulnerabilities, including:

  • CVE-2019-0119
  • CVE-2019-0126

These issues are not unique to HPE servers.  Note that MDS is addressed in hardware for systems utilizing the Intel Second Generation Intel Xeon Scalable Processors.

Updates to address HPESBHF03917 are also included. 

For the latest security bulletins and vulnerabilities, please refer to the Hewlett Packard Enterprise Support Center Security Bulletin Archive

Important

These images support the current shipping HPE SimpliVity platforms.

To upgrade the firmware on legacy SimpliVity platforms please see specific platform manufacturer's support site to obtain their supported firmware. For specific information refer to the appropriate platform Interoperability Guide.

  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
    • HPE SimpliVity OmniCube Interoperability Guide
    • HPE SimpliVity OmniStack for Dell Interoperability Guide
  • OmniStack Integrated Solution with Cisco UCS C240M3S, OmniStack Integrated Solution with Cisco UCS C240 M4SX
    • HPE SimpliVity OmniStack for Cisco Interoperability Guide
  • OmniStack Solution with Lenovo x3650 M5
    • HPE SimpliVity OmniStack for Lenovo Interoperability Guide

Revision History

Version:2019.0903 (3 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS).  This includes support for mitigating the following vulnerabilities: 

  • CVE-2018-12126 – Microarchitectural Store Buffer Data Sampling
  • CVE-2018-12130 – Microarchitectural Fill Buffer Data Sampling
  • CVE-2018-12127 – Microarchitectural Load Port Data Sampling
  • CVE-2019-11091 – Microarchitectural Data Sampling Uncacheable Memory. 

Includes the latest revision of the Intel Reference code support that provides mitigations for a variety of security vulnerabilities, including:

  • CVE-2019-0119
  • CVE-2019-0126

These issues are not unique to HPE servers.  Note that MDS is addressed in hardware for systems utilizing the Intel Second Generation Intel Xeon Scalable Processors.

Updates to address HPESBHF03917 are also included. 

For the latest security bulletins and vulnerabilities, please refer to the Hewlett Packard Enterprise Support Center Security Bulletin Archive

Enhancements

Support for the HPE SimpliVity 325 Gen10.


Version:3.7.9 (21 Jun 2019)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the HPE SimpliVity platforms and options.  The following important updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. C
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.62
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array and Smart HBA H240ar, H240nr, H240, H241, H244br, P240nr, P244br, P246br, P440ar, P440, P441, P542D, P741m, P840, P840ar, and P841 6.88
Firmware - Storage Controller Supplemental Update / Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408i-sb, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.98
Firmware - System Online ROM Flash for Linux - Server Platform Services (SPS) Firmware for HPE Gen10 Servers 04.01.04.251
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.70_12-29-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 2.02_03-19-2019
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 2.02_03-19-2019
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.8 (25 Mar 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following important updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.64 2018-10-17
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.46 2018-10-02
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.46 2018-10-11
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.61
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.39
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Firmware - Storage Controller Online ROM Flash Component for Linux - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.66
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.7 (21 Dec 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following critical updates are included:

Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD, VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK, MK000240GWKVK, MK000480GWJPN, MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.60_05-21-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.42_06-20-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.42_06-23-2018
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.61
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.35
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Firmware - Storage Controller Online ROM Flash Component for Linux - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P204i-b, P816i-a and P416ie-m SR Gen10 1.66
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.6 (14 Sep 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides firmware updates for the SimpliVity 380 Gen9, SimpliVity 380 Gen10, and SimpliVity 2600 platforms and options.  The following critical updates are included:

Product Category Description Version
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWEZB, VK000480GWEZC, VK000960GWEZD, VK001920GWEZE, MK000240GWEZF, MK000480GWEZH, MK000960GWEZK, and MK001920GWHRU Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - MR000240GWFLU, MR000480GWFLV, VR000480GWFMD, MR000960GWFMA, VR000960GWFME, MR001920GWFMB, and VR001920GWFMC Drives HPG8
Firmware - SATA Storage Disk Supplemental Update / Online ROM Flash Component for Linux (x64) - VK000240GWJPD,VK000480GWJPE, VK000960GWJPF, VK001920GWJPH, VK003840GWJPK,MK000240GWKVK,MK000480GWJPN,MK000960GWJPP and MK001920GWJPQ Drives HPG3 Rev. B
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5 1.30
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers 2.60_05-21-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE ProLiant DL380 Gen10 (U30) Servers 1.42_06-20-2018
BIOS - System ROM Online ROM Flash Component for Linux - HPE Apollo 2000 Gen10/HPE ProLiant XL170r/XL190r Gen10 (U38) Servers 1.42_06-23-2018
Firmware - Lights-Out Management Online ROM Flash Component for Linux - HPE Integrated Lights-Out 4 2.60
Firmware Online ROM Flash for Linux - HPE Trusted Platform Module 2.0 Option firmware update for HPE Gen9 Servers 5.62 Rev. B
Enhancements

This release provides important firmware updates for the following platforms:

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600

Version:3.7.5 (12 Jun 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


This release provides critical System and Drive Firmware updates for the SimpliVity 380 Gen9 and SimpliVity 380 Gen10 platforms and options.

Enhancements

This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • HPE SimpliVity 2600
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.4 (9 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


No new firmware ISO was released for the HPE OmniStack Firmware 3.7.4. 

Please use HPE OmniStack Firmware iso 3.7.3 in conjunction with OmniStack Software version 3.7.4. 

If system was previously updated with OmniStack Firmware 3.7.3, there is no need to update to the OmniStack Firmware 3.7.4  

Direct link to OmniStack Firmware 3.7.3: https://www.hpe.com/global/swpublishing/MTX-0ff0f0a1e7264daf879ba7b48d

Enhancements

This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.3 (15 Mar 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This release of HPE OmniStack software fixes these issues.

Category Description
Backup

Remote backups resume after extended outages between datacenters or clusters

Deployment

HPE SimpliVity 380 Gen10 servers that use an Ethernet 10Gb 2P 530SFP+ adapter no longer fail during deployment after the hypervisor writes to the boot drive and the host restarts. The deployment process finishes as expected.

Hardware

HPE SimpliVity 380 Gen10 servers take extended time to reboot.

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the following platforms and options.

  • HPE SimpliVity 380 Gen9
  • HPE SimpliVity 380 Gen10
  • OmniCube CN-1200, CN-1400, CN-2000, CN-2200, CN-2400, CN-2400-E, CN-2400-F, CN-3000, CN-3400, CN-3400-E, CN-3400-F, CN-5000, CN-5400, CN-5400-E, CN-5400-F
  • OmniStack Integrated Solution with Cisco UCS C240M3S & OmniStack Integrated Solution with Cisco UCS C240 M4SX
  • OmniStack Solution with Lenovo x3650 M5

Version:3.7.2 (10 Jan 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This release of HPE OmniStack software fixes these issues.

 

Category

Description

Backup

• If you have two or more clusters that contain datastores with the same name, backup restore operations can fail

• Remote backups resume after extended outages between datacenters or clusters

Deployment

When the HPE SimpliVity Installer is running, and the network connection fails, the Virtual Controller fails to deploy.

General restrictions and known issues

Database transaction counter overflow produces system core

Hardware

SSD Array Critical and SSD Array Warning alarms displayed simultaneously in an HPE SimpliVity 380 Gen10 Raid6 configuration.

Performance

Virtual Controller became unresponsive and virtual machines and datastores became inaccessible. SSH connection to the Virtual Controller timed out. You needed to restart the host to recover the connection.

Upgrade

• Upgrade Manager now allows the use of an asterisk symbol ("*") as part of a login password string.

• Unable to create replica, could not transfer upgrade package

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 Gen9 and HPE SimpliVity 380 Gen10 platforms and options.


Version:3.7.1 (18 Sep 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 Gen9 and HPE SimpliVity 380 Gen10 platforms and options.


Version:3.7.0(A) (17 Jul 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware release provides important System and Drive Firmware updates for the HPE SimpliVity 380 HPE Gen9 platforms and options.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.