Printable version

Drivers & software

iLO 5 Automatic Server Recovery Driver for Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - System Management
Version: 4.4.0.0(16 Jul 2018)
Operating System(s): Microsoft Windows Server 2016
Multi-part download
File name: cp035138.compsig (2.0 KB)
File name: cp035138.exe (751 KB)
The iLO 5 Automatic Server Recovery Driver manages the ASR hardware timer, which will reset the server in the event of an operating system crash or lockup.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

ef656eb3d1534b38970e0da42306d11bcdd131c6afb6b0d8db4b52733c32302b cp035138.exe
515339dc1705b48dbcae616a2e995926f9af0271d2224b9c23ac804f9f1d2397 cp035138.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.


Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.

Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.4.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.4.0.0 (16 Jul 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

Version:4.2.0.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.


Version:4.2.0.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Type: Driver - System Management
Version: 4.4.0.0(16 Jul 2018)
Operating System(s):
Microsoft Windows Server 2016

Description

The iLO 5 Automatic Server Recovery Driver manages the ASR hardware timer, which will reset the server in the event of an operating system crash or lockup.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

ef656eb3d1534b38970e0da42306d11bcdd131c6afb6b0d8db4b52733c32302b cp035138.exe
515339dc1705b48dbcae616a2e995926f9af0271d2224b9c23ac804f9f1d2397 cp035138.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.


Important

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.

Revision History

Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.4.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.4.0.0 (16 Jul 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

Version:4.2.0.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.


Version:4.2.0.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.