|
HPE Intel Online Firmware Upgrade Utility for Windows Server x64 Editions
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:
Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
This component contains utilities and firmware for the online upgrade of HPE Intel NIC firmware running under Microsoft Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 and Windows Server 2019.
Prerequisites:
This product requires the appropriate driver for your device and operating system be installed before firmware is updated.
To ensure the integrity of your download, HPE recommends verifying your results with
the following SHA-256 Checksum values:
5cb4acaa9467d1d9766a4a040f0714c5aa36229b0822127dcc7bd66fe5695e0e |
cp038940.exe |
284fe3c191bdb2d253359320d460836313225dac99b6c45d8d72551ea88640f0 |
cp038940.compsig |
Reboot Requirement: Reboot is required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
- When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed. For more information about downgrade limitation, refer to the following Customer advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069764en_us
- AC Power Cycle is required after firmware installation for updates to take effect for the following network adapters:
HPE Ethernet 1Gb 2-port 368i Adapter
HPE Ethernet 1Gb 2-port 369i Adapter
HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes:
This software package contains the following firmware versions for the below listed supported nework adapters:
NIC |
EEPROM/NVM Version |
OROM Version |
Single NVM Version |
HP Ethernet 1Gb 2-port 361i Adapter |
80000CD5 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 2-port 361T Adapter |
80000F91 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 2-port 363i Adapter |
80000D00 |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 4-port 366i Communication Board |
80000EBF |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366i Adapter |
80000E24 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366FLR Adapter |
80000F44 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366T Adapter |
80000E81 |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 2-port 368i Adapter |
800019AC |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 4-port 369i Adapter |
800019AD |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560FLB Adapter |
800008F0 |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter |
80000838 |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560M Adapter |
8000083D |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 560SFP+ Adapter |
80000835 |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568i Adapter |
800019AE |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 563i Adapter |
800035C0 |
1.1375.0 |
N/A |
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter |
80004C61 |
1.2121.0 |
10.5.5 |
HPE Ethernet 10Gb 2-port 562FLR-T Adapter |
80000E3B |
1.2121.0 |
10.5.3 |
HPE Ethernet 10Gb 2-port 562SFP+ Adapter |
80004C60 |
1.2121.0 |
10.5.5 |
HPE Ethernet 10Gb 2-port 562T Adapter |
80000E3A |
1.2121.0 |
10.5.3 |
HPE Synergy 4610C 10/25Gb Ethernet Adapter |
80004C62 |
1.2121.0 |
10.5.6 |
The combo image v1.2121.0 includes: Boot Agent: 1GbE - v1.5.86, 10GbE - v2.4.32, 40GbE - v1.1.02 & UEFI Drivers: 1GbE - v8.6.09, 10GbE - v7.1.09, 40GbE - v3.4.09
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
Supported Devices and Features:
This package supports the following network adapters:
- HP Ethernet 1Gb 2-port 361i Adapter
- HP Ethernet 1Gb 2-port 361T Adapter
- HP Ethernet 1Gb 2-port 363i Adapter
- HP Ethernet 1Gb 4-port 366FLR Adapter
- HP Ethernet 1Gb 4-port 366i Adapter
- HPE Ethernet 1Gb 4-port 366i Communication Board
- HP Ethernet 1Gb 4-port 366T Adapter
- HPE Ethernet 1Gb 2-port 368i Adapter
- HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
- HPE Ethernet 1Gb 4-port 369i Adapter
- HP Ethernet 10Gb 2-port 560FLB Adapter
- HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
- HP Ethernet 10Gb 2-port 560SFP+ Adapter
- HP Ethernet 10Gb 2-port 560M Adapter
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 563i Adapter
- HPE Ethernet 10Gb 2-port 568i Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
- HPE Synergy 4610C 10/25Gb Ethernet Adapter
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where shared memory settings are not preserved after a firmware update.
This product addresses an issue where the Legacy VLAN ID isn't reset to 0 while pressing F7 to reset to default.
This product addresses an issue where, after a firmware update for the HPE Synergy 4610C 10/25Gb Ethernet Adapter, the server fails to power up due to thermal fault errors.
This product addresses an issue where firmware update for all Intel adapters fails when the system contains an obsolete Intel adapter.
This product addresses an issue where the MAC of the HPE Ethernet 10Gb 2-port 562T Adapter is duplicated after applying the 09.2018 SPP.
This product addresses a Windows Stop Error (BSOD) seen with the following adapters when installing Windows Server 2016:
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
Version:5.2.3.0 (5 Oct 2020)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- This product addresses an WOL issue that system wakes up automatically if any magic packet being sent before system was shut down. A corresponding driver setting to enable PME under Windows® should be adopted as well.
- This product addresses an issue where ECC error occurs when running failed recovery with HPE Ethernet 10Gb 2-port 562T Adapter and HPE Ethernet 10Gb 2-port 562FLR-T Adapter.
Version:5.2.0.0 (20 Dec 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where LLDP are disabled.
This product addresses an issue where "Firmware Image Properties", "Device Level Configuration", and "Link Speed Status" options in NIC HII menu will disappear when F7 is pressed.
This product addresses an issue where POST when ESC Is Pressed to Enter The BIOS Setup Utility with HP Ethernet 1Gb 4-port 366FLR Adapter.
This product addresses an issue where there is no VLAN function under Legacy mode.
Enhancements
Version:5.1.5.0 (12 Aug 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where shared memory settings are not preserved after a firmware update.
This product addresses an issue where the Legacy VLAN ID isn't reset to 0 while pressing F7 to reset to default.
This product addresses an issue where, after a firmware update for the HPE Synergy 4610C 10/25Gb Ethernet Adapter, the server fails to power up due to thermal fault errors.
This product addresses an issue where firmware update for all Intel adapters fails when the system contains an obsolete Intel adapter.
This product addresses an issue where the MAC of the HPE Ethernet 10Gb 2-port 562T Adapter is duplicated after applying the 09.2018 SPP.
This product addresses a Windows Stop Error (BSOD) seen with the following adapters when installing Windows Server 2016:
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
Version:5.1.4.0 (2 Apr 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product corrects an issue where the name for the HP Ethernet 1Gb 4-port 366FLR Adapter is displayed incorrectly in the network boot options.
This product corrects an issue where the HPE Ethernet 10Gb 2-port 562FLR-T Adapter can be awakened when the NIC WOL setting is disabled.
This product corrects an issue where system hangs when booting from the PXE boot menu.
Enhancements
This product now supports Windows Server 2019.
This product now supports the HPE Synergy 4610C 10/25Gb Ethernet Adapter.
Version:5.1.3.0(B) (27 Nov 2018)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product has been built with a new installer that prevents its installation on systems running Windows Server 2019.
Version:5.1.3.0 (26 Jun 2018)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses a NIC VLAN ID issue seen in the NIC Human Interface Infrastructure (HII) menu when operating in UEFI mode.
This product addresses a teaming issue where the HPE Ethernet 10Gb 2-port 561T Adapter still shows connected on the switch after the NIC has been disabled.
This product addresses a link issue and a PXE issue seen with the HPE Ethernet 10Gb 2-port 560FLB Adapter.
This product addresses a WOL issue seen with the HPE Ethernet 1Gb 4-port 366T Adapter.
Version:5.1.2.2 (5 Feb 2018)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- This product corrects a Wake-on-LAN (WoL) issue seen with the HP Ethernet 1Gb 2-port 361T Adapter.
- This product corrects an issue where there is no VLAN function under Legacy mode on the HP Ethernet 1Gb 2-port 361T Adapter.
Version:5.1.1.0 (25 Sep 2017)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
- HPE Ethernet 1Gb 2-port 368i Adapter
- HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
- HPE Ethernet 1Gb 4-port 369i Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
Version:5.1.0.4 (12 Jul 2017)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the HPE Ethernet 10Gb 2-port 568i Adapter.
Version:5.0.0.27(B) (10 Jan 2017)
Fixes
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This product fixes link flapping issue reported on the HP Ethernet 10Gb 2-port 560FLB Adapter.
This product addresses a security issue reported on the following network adapters:
- HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
- HP Ethernet 10Gb 2-port 562SFP+ Adapter
See the security bulletin HPSBHF03695 for more information.
Version:5.0.0.27 (7 Nov 2016)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses connectivity issues that may occur while booting mounted image when the shared network port is enabled on HPE FlexFabric 10Gb 2-port 562 FLR-SFP+/SFP adapters.
Enhancements
This product now supports Windows Server 2016.
This product now supports the HPE Ethernet 1Gb 4-port 366i Communication Board.
Version:5.0.0.7 (1 Apr 2016)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where the temperature is incorrectly reported by the thermal sensors, causing the fans to run high.
Version:4.0.0.17(C) (1 Oct 2015)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now provides improved downgrade functionality for the HP Ethernet 10Gb 2-port 560FLB Adapter.
This product provides improved handling of directory names with embedded spaces.
Version:4.0.0.17 (15 Jun 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where the in-flash image is corrupted during SST flashes.
Enhancements
This product now supports the following network adapters:
- HP Ethernet 1Gb 4-port 366T Adapter
- HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
- HP Ethernet 10Gb 2-port 562SFP+ Adapter
Version:4.0.0.13(B) (30 Mar 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The firmware in this product addresses a Wake-on-LAN (WoL) issue seen with the HP Ethernet 10Gb 2-port560FLR-SFP+ Adapter.
This product addresses the issue described in Customer Advisory #c04438541.
The firmware in this product addresses an issue where port #1 for an HP Ethernet 1Gb 4-port 366FLR Adapter doesn’t receive any IP traffic from a Dynamic Host Configuration Protocol (DHCP) server.
Version:4.0.0.13(A) (7 Jan 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component contains updated tools that resolve firmware installation issues caused by some EEPROM ID changes.
Version:4.0.0.13 (9 Sep 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
DEPRECATED: HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13 is no longer recommended for use. To install new or upgrade existing firmware, use HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13(A) or later. HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13(A) is available at http://www.hp.com/swpublishing/MTX-55186e7628b0455aaea411c3ae.
The component tools in this component have been updated to properly identify Windows Server 2012 R2.
This component resolves an issue in the Intel Ethernet Thermal Sensor Monitor Service (IETMS.exe) that results in ping times exceeding 1000ms and very heavy consumption of CPU resources.
Enhancements
The component tools in this component have been updated to include translations for Simplified Chinese.
Version:4.0.0.10(D) (10 Jun 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component addresses an issue which prevented correct operation on the HP Ethernet 1Gb 1-port 364i Adapter.
This component addresses an issue that resulted in sideband communication transmitting from the wrong port.
Version:4.0.0.10(C) (18 Feb 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This firmware addresses an issue where a Pre-Execution Environment (PXE) boot fails when the Spanning Tree Protocol is enabled on a network switch.
This firmware addresses a system hang seen with Product Development Kit Intel® APITEST with PXE version 1.5.33.
This firmware addresses an issue where the Windows Deployment Services fail.
Enhancements
This software now supports the following network adapters:
-
HP Ethernet 1Gb 2-port 363i Adapter
-
HP Ethernet 1Gb 1-port 364i Adapter
-
HP Ethernet 1Gb 2-port 367i Adapter
-
HP Ethernet 10Gb 2-port 562i Adapter
Version:4.0.0.10 (11 Sep 2013)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This package now supports the following network adapters:
-
HP Ethernet 10Gb 2-port 561FLR-T Adapter
-
HP Ethernet 10Gb 2-port 561T Adapter
Version:1.0.3.1 (10 Sep 2013)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component contains new firmware that resolves an intermittent issue where the option ROM does not load during POST and the NIC is not available for network boot.
Version:1.0.2.1 (19 Feb 2013)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now supports the following network adapters:
-
HP Ethernet 1Gb 4-port 366FLR Adapter
-
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
-
HP Ethernet 10Gb 2-port 560M Adapter
Version:1.0.1.1(B) (26 Oct 2012)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now supports Windows Server 2012.
Version:1.0.1.1 (4 Sep 2012)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This package now supports the HP Ethernet 10Gb 2-port 560SFP+ Adapter.
Type: |
Firmware - Network |
Version: |
5.1.5.0(12 Aug 2019) |
Operating System(s): |
Microsoft Windows Server 2012
|
Microsoft Windows Server 2012 Essentials
|
Microsoft Windows Server 2012 R2
|
Microsoft Windows Server 2016
|
Microsoft Windows Server 2019
|
|
Description
This component contains utilities and firmware for the online upgrade of HPE Intel NIC firmware running under Microsoft Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 and Windows Server 2019.
Installation Instructions
Prerequisites:
This product requires the appropriate driver for your device and operating system be installed before firmware is updated.
To ensure the integrity of your download, HPE recommends verifying your results with
the following SHA-256 Checksum values:
5cb4acaa9467d1d9766a4a040f0714c5aa36229b0822127dcc7bd66fe5695e0e |
cp038940.exe |
284fe3c191bdb2d253359320d460836313225dac99b6c45d8d72551ea88640f0 |
cp038940.compsig |
Reboot Requirement: Reboot is required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
- When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed. For more information about downgrade limitation, refer to the following Customer advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069764en_us
- AC Power Cycle is required after firmware installation for updates to take effect for the following network adapters:
HPE Ethernet 1Gb 2-port 368i Adapter
HPE Ethernet 1Gb 2-port 369i Adapter
HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
Release Notes
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes:
This software package contains the following firmware versions for the below listed supported nework adapters:
NIC |
EEPROM/NVM Version |
OROM Version |
Single NVM Version |
HP Ethernet 1Gb 2-port 361i Adapter |
80000CD5 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 2-port 361T Adapter |
80000F91 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 2-port 363i Adapter |
80000D00 |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 4-port 366i Communication Board |
80000EBF |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366i Adapter |
80000E24 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366FLR Adapter |
80000F44 |
1.2121.0 |
N/A |
HP Ethernet 1Gb 4-port 366T Adapter |
80000E81 |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 2-port 368i Adapter |
800019AC |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 1Gb 4-port 369i Adapter |
800019AD |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560FLB Adapter |
800008F0 |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter |
80000838 |
1.2121.0 |
N/A |
HP Ethernet 10Gb 2-port 560M Adapter |
8000083D |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 560SFP+ Adapter |
80000835 |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568i Adapter |
800019AE |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter |
800019AB |
1.2121.0 |
N/A |
HPE Ethernet 10Gb 2-port 563i Adapter |
800035C0 |
1.1375.0 |
N/A |
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter |
80004C61 |
1.2121.0 |
10.5.5 |
HPE Ethernet 10Gb 2-port 562FLR-T Adapter |
80000E3B |
1.2121.0 |
10.5.3 |
HPE Ethernet 10Gb 2-port 562SFP+ Adapter |
80004C60 |
1.2121.0 |
10.5.5 |
HPE Ethernet 10Gb 2-port 562T Adapter |
80000E3A |
1.2121.0 |
10.5.3 |
HPE Synergy 4610C 10/25Gb Ethernet Adapter |
80004C62 |
1.2121.0 |
10.5.6 |
The combo image v1.2121.0 includes: Boot Agent: 1GbE - v1.5.86, 10GbE - v2.4.32, 40GbE - v1.1.02 & UEFI Drivers: 1GbE - v8.6.09, 10GbE - v7.1.09, 40GbE - v3.4.09
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
Supported Devices and Features:
This package supports the following network adapters:
- HP Ethernet 1Gb 2-port 361i Adapter
- HP Ethernet 1Gb 2-port 361T Adapter
- HP Ethernet 1Gb 2-port 363i Adapter
- HP Ethernet 1Gb 4-port 366FLR Adapter
- HP Ethernet 1Gb 4-port 366i Adapter
- HPE Ethernet 1Gb 4-port 366i Communication Board
- HP Ethernet 1Gb 4-port 366T Adapter
- HPE Ethernet 1Gb 2-port 368i Adapter
- HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
- HPE Ethernet 1Gb 4-port 369i Adapter
- HP Ethernet 10Gb 2-port 560FLB Adapter
- HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
- HP Ethernet 10Gb 2-port 560SFP+ Adapter
- HP Ethernet 10Gb 2-port 560M Adapter
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 563i Adapter
- HPE Ethernet 10Gb 2-port 568i Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
- HPE Synergy 4610C 10/25Gb Ethernet Adapter
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where shared memory settings are not preserved after a firmware update.
This product addresses an issue where the Legacy VLAN ID isn't reset to 0 while pressing F7 to reset to default.
This product addresses an issue where, after a firmware update for the HPE Synergy 4610C 10/25Gb Ethernet Adapter, the server fails to power up due to thermal fault errors.
This product addresses an issue where firmware update for all Intel adapters fails when the system contains an obsolete Intel adapter.
This product addresses an issue where the MAC of the HPE Ethernet 10Gb 2-port 562T Adapter is duplicated after applying the 09.2018 SPP.
This product addresses a Windows Stop Error (BSOD) seen with the following adapters when installing Windows Server 2016:
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
Revision History
Version:5.2.3.0 (5 Oct 2020)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- This product addresses an WOL issue that system wakes up automatically if any magic packet being sent before system was shut down. A corresponding driver setting to enable PME under Windows® should be adopted as well.
- This product addresses an issue where ECC error occurs when running failed recovery with HPE Ethernet 10Gb 2-port 562T Adapter and HPE Ethernet 10Gb 2-port 562FLR-T Adapter.
Version:5.2.0.0 (20 Dec 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where LLDP are disabled.
This product addresses an issue where "Firmware Image Properties", "Device Level Configuration", and "Link Speed Status" options in NIC HII menu will disappear when F7 is pressed.
This product addresses an issue where POST when ESC Is Pressed to Enter The BIOS Setup Utility with HP Ethernet 1Gb 4-port 366FLR Adapter.
This product addresses an issue where there is no VLAN function under Legacy mode.
Enhancements
Version:5.1.5.0 (12 Aug 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where shared memory settings are not preserved after a firmware update.
This product addresses an issue where the Legacy VLAN ID isn't reset to 0 while pressing F7 to reset to default.
This product addresses an issue where, after a firmware update for the HPE Synergy 4610C 10/25Gb Ethernet Adapter, the server fails to power up due to thermal fault errors.
This product addresses an issue where firmware update for all Intel adapters fails when the system contains an obsolete Intel adapter.
This product addresses an issue where the MAC of the HPE Ethernet 10Gb 2-port 562T Adapter is duplicated after applying the 09.2018 SPP.
This product addresses a Windows Stop Error (BSOD) seen with the following adapters when installing Windows Server 2016:
- HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562FLR-T Adapter
- HPE Ethernet 10Gb 2-port 562SFP+ Adapter
- HPE Ethernet 10Gb 2-port 562T Adapter
Version:5.1.4.0 (2 Apr 2019)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product corrects an issue where the name for the HP Ethernet 1Gb 4-port 366FLR Adapter is displayed incorrectly in the network boot options.
This product corrects an issue where the HPE Ethernet 10Gb 2-port 562FLR-T Adapter can be awakened when the NIC WOL setting is disabled.
This product corrects an issue where system hangs when booting from the PXE boot menu.
Enhancements
This product now supports Windows Server 2019.
This product now supports the HPE Synergy 4610C 10/25Gb Ethernet Adapter.
Version:5.1.3.0(B) (27 Nov 2018)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product has been built with a new installer that prevents its installation on systems running Windows Server 2019.
Version:5.1.3.0 (26 Jun 2018)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses a NIC VLAN ID issue seen in the NIC Human Interface Infrastructure (HII) menu when operating in UEFI mode.
This product addresses a teaming issue where the HPE Ethernet 10Gb 2-port 561T Adapter still shows connected on the switch after the NIC has been disabled.
This product addresses a link issue and a PXE issue seen with the HPE Ethernet 10Gb 2-port 560FLB Adapter.
This product addresses a WOL issue seen with the HPE Ethernet 1Gb 4-port 366T Adapter.
Version:5.1.2.2 (5 Feb 2018)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- This product corrects a Wake-on-LAN (WoL) issue seen with the HP Ethernet 1Gb 2-port 361T Adapter.
- This product corrects an issue where there is no VLAN function under Legacy mode on the HP Ethernet 1Gb 2-port 361T Adapter.
Version:5.1.1.0 (25 Sep 2017)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
- HPE Ethernet 1Gb 2-port 368i Adapter
- HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
- HPE Ethernet 1Gb 4-port 369i Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
- HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter
Version:5.1.0.4 (12 Jul 2017)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the HPE Ethernet 10Gb 2-port 568i Adapter.
Version:5.0.0.27(B) (10 Jan 2017)
Fixes
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This product fixes link flapping issue reported on the HP Ethernet 10Gb 2-port 560FLB Adapter.
This product addresses a security issue reported on the following network adapters:
- HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
- HP Ethernet 10Gb 2-port 562SFP+ Adapter
See the security bulletin HPSBHF03695 for more information.
Version:5.0.0.27 (7 Nov 2016)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses connectivity issues that may occur while booting mounted image when the shared network port is enabled on HPE FlexFabric 10Gb 2-port 562 FLR-SFP+/SFP adapters.
Enhancements
This product now supports Windows Server 2016.
This product now supports the HPE Ethernet 1Gb 4-port 366i Communication Board.
Version:5.0.0.7 (1 Apr 2016)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where the temperature is incorrectly reported by the thermal sensors, causing the fans to run high.
Version:4.0.0.17(C) (1 Oct 2015)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now provides improved downgrade functionality for the HP Ethernet 10Gb 2-port 560FLB Adapter.
This product provides improved handling of directory names with embedded spaces.
Version:4.0.0.17 (15 Jun 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product addresses an issue where the in-flash image is corrupted during SST flashes.
Enhancements
This product now supports the following network adapters:
- HP Ethernet 1Gb 4-port 366T Adapter
- HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
- HP Ethernet 10Gb 2-port 562SFP+ Adapter
Version:4.0.0.13(B) (30 Mar 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The firmware in this product addresses a Wake-on-LAN (WoL) issue seen with the HP Ethernet 10Gb 2-port560FLR-SFP+ Adapter.
This product addresses the issue described in Customer Advisory #c04438541.
The firmware in this product addresses an issue where port #1 for an HP Ethernet 1Gb 4-port 366FLR Adapter doesn’t receive any IP traffic from a Dynamic Host Configuration Protocol (DHCP) server.
Version:4.0.0.13(A) (7 Jan 2015)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component contains updated tools that resolve firmware installation issues caused by some EEPROM ID changes.
Version:4.0.0.13 (9 Sep 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
DEPRECATED: HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13 is no longer recommended for use. To install new or upgrade existing firmware, use HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13(A) or later. HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions version 4.0.0.13(A) is available at http://www.hp.com/swpublishing/MTX-55186e7628b0455aaea411c3ae.
The component tools in this component have been updated to properly identify Windows Server 2012 R2.
This component resolves an issue in the Intel Ethernet Thermal Sensor Monitor Service (IETMS.exe) that results in ping times exceeding 1000ms and very heavy consumption of CPU resources.
Enhancements
The component tools in this component have been updated to include translations for Simplified Chinese.
Version:4.0.0.10(D) (10 Jun 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component addresses an issue which prevented correct operation on the HP Ethernet 1Gb 1-port 364i Adapter.
This component addresses an issue that resulted in sideband communication transmitting from the wrong port.
Version:4.0.0.10(C) (18 Feb 2014)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This firmware addresses an issue where a Pre-Execution Environment (PXE) boot fails when the Spanning Tree Protocol is enabled on a network switch.
This firmware addresses a system hang seen with Product Development Kit Intel® APITEST with PXE version 1.5.33.
This firmware addresses an issue where the Windows Deployment Services fail.
Enhancements
This software now supports the following network adapters:
-
HP Ethernet 1Gb 2-port 363i Adapter
-
HP Ethernet 1Gb 1-port 364i Adapter
-
HP Ethernet 1Gb 2-port 367i Adapter
-
HP Ethernet 10Gb 2-port 562i Adapter
Version:4.0.0.10 (11 Sep 2013)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This package now supports the following network adapters:
-
HP Ethernet 10Gb 2-port 561FLR-T Adapter
-
HP Ethernet 10Gb 2-port 561T Adapter
Version:1.0.3.1 (10 Sep 2013)
Fixes
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component contains new firmware that resolves an intermittent issue where the option ROM does not load during POST and the NIC is not available for network boot.
Version:1.0.2.1 (19 Feb 2013)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now supports the following network adapters:
-
HP Ethernet 1Gb 4-port 366FLR Adapter
-
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
-
HP Ethernet 10Gb 2-port 560M Adapter
Version:1.0.1.1(B) (26 Oct 2012)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now supports Windows Server 2012.
Version:1.0.1.1 (4 Sep 2012)
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This package now supports the HP Ethernet 10Gb 2-port 560SFP+ Adapter.
|
|