| Type: |
Driver - System Management |
| Version: |
4.1.0.0(20 Nov 2017) |
| Operating System(s): |
|
Microsoft Windows Server 2016
|
|
Description
The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with
the following SHA-256 Checksum values:
| 7db61341f90e3fba68fd76725088b4db701f86836596fb05ee605e518f61917b |
cp033791.compsig |
| 99c79fc6c51118c03e96ce425bf72a9b6aa6fbeaa50a6608a759750de6b45bc0 |
cp033791.exe |
Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Release Notes
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.
Revision History
Version:4.6.0.0(C) (5 Oct 2020)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
TBD
Version:4.6.0.0 (20 Dec 2019)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Add support for iLO 5 version 2.x firmware.
- Add support for HPE ProLiant Gen10 Plus servers.
Version:4.5.0.0 (9 Sep 2019)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.
Version:4.3.0.0(B) (27 Nov 2018)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Added support for Windows Server 2019
- Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10
Version:4.3.0.0 (26 Jun 2018)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
- Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.
Version:4.1.0.0(B) (5 Feb 2018)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.
Version:4.1.0.0 (20 Nov 2017)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.
Version:4.0.0.0 (12 Jul 2017)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release.