Resolved various security issues that could cause Lights-Out 100 to become non-responsive.
Resolved an issue where continuous connection and disconnection of KVMS connections would cause loss of network connectivity.
Resolved an issue where the Lights-Out 100 could not support 4 concurrent telnet sessions.
Resolved an issue where Lights-Out 100 was not supporting 4 concurrent IPMI sessions.
Resolved an issue where an IPMI command to change boot order is persistent only when requested.
Resolved an issue where Lights-Out 100 would be unable to communicate with certain IP addresses when the IP address ended in 253 or 254.
Improved the security of the login process.
Resolved an issue that could allow firmware to be corrupted when using the CLP load command with an invalid image.
Removed auto-discovery of hard drives in the remote virtual media because not all discovered drives were supported. This must be done manually now.
Resolved an issue with the error return value when querying sensor status on missing sensors when using ipmitool.
Resolved issues with synchronization between the UID button status and IPMI and CLP UID state.
Changed the order of the GUID numbers displayed on the web UI main status page.
Removed the automatic reset after uploading SSL/SSH key/certs. Customers must AC cycle the system or do a virtual power down from the web GUI and then use the SMASH CLP command 'reset' under map1 to reset Lights-Out 100.
Resolved an issue with telnet and SSH where ESC key sequences might not be passed through in console redirection sessions.
Changed the number of serial over LAN sessions with write privileges to be restricted to 1 session.
Resolved an issue where aborting a file transfer with remote media could cause issues reconnecting to the remote media.
Added a workaround to allow Magic ISO program to be used for virtual storage.
Reformatted the display of some sensors in the web UI page.
Improved the status reporting of the online flash updates through the CLP and web interface.
Resolved an issue where invalid links appeared in the UI when login attempts failed.
Resolved an issue where very cold operating temperatures could cause Lights-Out 100 to become unresponsive.
Resolved an issue where continuous login/logout of SSL connections would cause loss of network connectivity.
Resolved an issue where continuous mouse movement concurrent with heavy virtual floppy use would cause the mouse to become unresponsive.
Added password security features to user administration web page to prevent snooping.
Resolved an issue where the fan fault status report was incorrect with an IPMI GetChassisStatus command.
Improved the screen formatting for Netscape and Firefox for the Lights-Out 100 web UI.
Improved web UI for better clarity.
The DNS naming feature has been disabled for connections through low-speed shared NICs (which cannot properly support it).
Fixed an issue where LO100 may not respond to ping requests if they came from a different subnet.
Fixed an issue where systems that are using a low-speed shared NIC may not be assigned an IP address from Linux based DHCP servers.
SMASH CLP changes:
Changed the output error message of the CD CLP from "invalid directory" to "invalid target".
Changed the CLP CD command to no longer require a prepended /./ to the absolute path.
Moved log1 to be under system1.
Moved the sensor and FRU data to map1.
Resolved issues with the parsing of an implicit target.
Resolved display issues with the show command in the sensor profile.
Resolved an issue with the CLP load help command not producing any output.
Added support for the -wait, -keep,-examine, and -display CLP options.
Added start / stop commands for the console redirection to the CLP.
Resolved an issue where the last character was not being displayed for target names.
Added -level command for the show option.
Resolved an issue with the the command line ordering of the help displays for the CLP.
Resolved an issue that allowed mixed case characters for logins when setting usernames and passwords (and filenames for the CLP LOAD command) through the CLP.
Reversed the fan upper/lower critical event messages reported in the CLP to make it consistent with the web display.
Added the serial number and demo key "# of days remaining" to map1.
Resolved an issue where some sensors in the CLP were not displaying correctly.
Added idate property to identify license installation date.
Resolved an issue with exceptions being generated by typing help in the CLP.
Added status messages for firmware download and key/cert downloads.
Remote graphical console fixes:
Cleared remote graphical console screen when the managed system powers off.
Resolved an issue where the remote graphical console viewer wasn't correctly displaying an initial blue screen during a Windows install.
Resolved an issue where a remote graphical console session wasn't correctly disconnected even though the client was shutdown. This would eventually result in an inability to establish a new remote graphical console session.
Resolved an issue with remote graphical console supporting certain legacy graphics modes.
Resolved an issue where remote storage could intermittently disconnect or become unresponsive when the managed system reboots.
Resolved an intermittent several second delay in launching the remote graphical console functionality when the link was clicked.
Resolved remote graphical console display issues with certain legacy VGA modes.
Resolved an issue with graphics mode switching using Lights-Out 100 remote graphical console in Red Hat Enterprise Linux 5.
Known Problems -
It is possible for the user to disable all user accounts from the user administration screen.
Flashing to version 3.05 or later from version 3.04 or earlier may cause the system event log to be cleared.