Drivers & software

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated HPONCFG to support HPE iLO 5

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Installing Offline Bundles on an vSphere 6.0 Host Using vSphere CLI 6.0 esxcli Utility  

You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.

This bundle includes the followng software versions:  

• bootcfg-6.0.0.02-03.00.5.2494585.vib
• conrep-6.0.0.03-00.00.8.2494585.vib
• cru_6.0.9.8-1OEM.600.0.0.2494585.vib
• hponcfg-6.0.0.5.0-2.2.2494585.vib
• ilo_600.10.1.0.12-1OEM.600.0.0.2494585.vib
• ssacli-3.10.3.0-6.0.0.vib
• testevent-6.0.0.02-00.00.8.2494585.vib

Prerequisites

Before you can update or patch a vSphere 6.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface vSphere 6.0  (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.0. see the VMware vSphere Command-Line Interface Guides.

Procedure 

1. Power off any virtual machines that are running on the host and place the host into maintenance mode.
2. Transfer the offline bundle onto the ESXi host local path, or extract it onto an online depot.
3. Install the bundle on the ESXi host.
   • Install remotely from client, with offline bundle contents on a online depot:  
        esxcli -s <server> -u root -p mypassword software vib install -d <depotURL/bundle-index.xml>
   • Install remotely from client, with offline bundle on ESXi host:  
        esxcli -s <server> -u root -p mypassword software vib install -d <ESXi local path><bundle.zip>
   • Install from ESXi host, with offline bundle on ESXi host:  
        esxcli software vib install -d <ESXi local path><bundle.zip>
4. After the bundle is installed, reboot the ESXi host for the updates to take effect.
5. (Optional) Verify that the vibs on the bundle are installed on your ESXi host:
      esxcli -s <server> -u root -p mypassword software vib list
6. (Optional) Remove individual vibs. <vib name> can be identified by listing the vibs as shown in #5:
      esxcli -s <server> -u root -p mypassword software vib remove -n <vib name>

Installing Offline Bundles on an vSphere 6.0 Host Using VMware vCenter Update Manager

The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.

End User License Agreements:
HPE Software License Agreement v1
Boost License
Hewlett-Packard End User License Agreement
Net-SNMP License

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

For additional information about the utilities mentioned in this product, please refer to the document "HPE VMware Utilities User Guide for VMware vSphere 6.0 for Oct 26, 2017" which is located at www.hpe.com/info/vmware/proliant-docs.

For additional information about the utilities mentioned in this product, please refer to the document "HPE VMware Utilities User Guide for VMware vSphere 6.0 for Oct 26, 2017" which is located at www.hpe.com/info/vmware/proliant-docs.