Printable version

Drivers & software

* RECOMMENDED * Online ROM Flash component for VMware ESXi - HPE Dual 8GB microSD USB

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Storage Controller
Version: 1.3.2.215(26 Jun 2018)
Operating System(s): VMware vSphere 5.5
VMware vSphere 6.0
VMware vSphere 6.5
Multi-part download
File name: CP034825.compsig (881 Bytes)
File name: CP034825.zip (1.0 MB)
This Smart Component provides firmware for the HPE Dual 8GB microSD Enterprise Midline USB

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

32227de3d133ed0171ca221a0bc0939d38c56d5cfd921cb4223fb2701f524cbe CP034825.zip
2b18a7683d23fee41dc03673d5cdc9cccd18316854ef42f3474ebbead7d028b0 CP034825.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To use Smart Update Manager from the Service Pack for ProLiant:

Remote Online:

  • Download the appropriate SPP.
  • Add the component to the SPP.
  • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
  • Run SUM.
  • Add the ESXi host to be updated as a remote target/node.
  • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
  • For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.

Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
 
To use HP Insight Control for vCenter:

  • Log in to the vSphere Client.
  • Select a server or cluster in the inventory tree.
  • Click the HP Insight Management tab.
  • Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host.
  • Login as root. (You must be root in order to apply the update.)
  • Place the Smart Component zip file in a temporary directory.
  • Unzip the file CPXXXXXX.zip
  • Ensure that CPXXXXXX.vmexe is executable by using the command:

             chmod +x CPXXXXXX.vmexe    

  • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
  • Follow the directions given by the Smart Component.
  • Logout
  • Disable Tech Support Mode on the ESXi host.

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
     Online Smart Component which upgrades firmware on HPE Dual 8GB microSD Enterprise Midline USB 

Release Version and/or Date:
     1.3.2.215

Last Recommended or Critical Version:
     1.3.2.215

Previous Version of Firmware:
     1.3.2.212

Firmware Dependency:
     None

Enhancements/New Features:

  • None.

Problems Fixed:

  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Known Issues: 
     None


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.
Version:1.3.2.215(B) (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.215 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.212 (27 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:

  • An HPE ProLiant Gen9 server upgraded to System ROM version 2.40_02-17-2017 will stop responding during Power-On Self-Test (POST) when performing a warm boot if the system is configured with HPE Dual 8GB microSD Enterprise Midline USB Kit (741279-B21) , which has controller firmware version FW 1.3.2.202. For additional information, refer to HPE Customer Advisory a00016609en_us
Enhancements

Enhancements/New Features:

  • Enables an HPE Dual 8GB microSD USB to report SD device errors that might occur after a warm boot of an HPE ProLiant Gen9 server that is configured with the device. Server system ROM version 2.40_02-17-2017 or later must be installed on the server to enable this new feature.

  • Improves reliability by updating power cycle logic to enhance Electro-static discharge tolerance.


Version:1.3.2.19 (1 Apr 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

Type: Firmware - Storage Controller
Version: 1.3.2.215(26 Jun 2018)
Operating System(s):
VMware vSphere 5.5
VMware vSphere 6.0
VMware vSphere 6.5

Description

This Smart Component provides firmware for the HPE Dual 8GB microSD Enterprise Midline USB

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

32227de3d133ed0171ca221a0bc0939d38c56d5cfd921cb4223fb2701f524cbe CP034825.zip
2b18a7683d23fee41dc03673d5cdc9cccd18316854ef42f3474ebbead7d028b0 CP034825.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To use Smart Update Manager from the Service Pack for ProLiant:

Remote Online:

  • Download the appropriate SPP.
  • Add the component to the SPP.
  • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
  • Run SUM.
  • Add the ESXi host to be updated as a remote target/node.
  • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
  • For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.

Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
 
To use HP Insight Control for vCenter:

  • Log in to the vSphere Client.
  • Select a server or cluster in the inventory tree.
  • Click the HP Insight Management tab.
  • Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host.
  • Login as root. (You must be root in order to apply the update.)
  • Place the Smart Component zip file in a temporary directory.
  • Unzip the file CPXXXXXX.zip
  • Ensure that CPXXXXXX.vmexe is executable by using the command:

             chmod +x CPXXXXXX.vmexe    

  • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
  • Follow the directions given by the Smart Component.
  • Logout
  • Disable Tech Support Mode on the ESXi host.

Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
     Online Smart Component which upgrades firmware on HPE Dual 8GB microSD Enterprise Midline USB 

Release Version and/or Date:
     1.3.2.215

Last Recommended or Critical Version:
     1.3.2.215

Previous Version of Firmware:
     1.3.2.212

Firmware Dependency:
     None

Enhancements/New Features:

  • None.

Problems Fixed:

  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Known Issues: 
     None


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Revision History

Version:1.3.2.215(B) (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.215 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.212 (27 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:

  • An HPE ProLiant Gen9 server upgraded to System ROM version 2.40_02-17-2017 will stop responding during Power-On Self-Test (POST) when performing a warm boot if the system is configured with HPE Dual 8GB microSD Enterprise Midline USB Kit (741279-B21) , which has controller firmware version FW 1.3.2.202. For additional information, refer to HPE Customer Advisory a00016609en_us
Enhancements

Enhancements/New Features:

  • Enables an HPE Dual 8GB microSD USB to report SD device errors that might occur after a warm boot of an HPE ProLiant Gen9 server that is configured with the device. Server system ROM version 2.40_02-17-2017 or later must be installed on the server to enable this new feature.

  • Improves reliability by updating power cycle logic to enhance Electro-static discharge tolerance.


Version:1.3.2.19 (1 Apr 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.