Printable version

Drivers & software

Online ROM Flash for Windows x64 - Advanced Power Capping Microcontroller Firmware for HPE Gen9 Servers

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Power Management
Version: 1.0.9(I)(27 Nov 2018)
Operating System(s): Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
File name: cp037781.exe (539 KB)
This component updates the Advanced Power Capping Microcontroller Firmware for HPE Gen9 Servers

Prerequisites:

 The "HPE ProLiant iLO 3/4 Channel Interface Driver for Windows" must be installed and running before using this flash component. If the driver is not running you will receive the following error message:
"The software is not supported for installation on this system.
You must install the iLO Channel Interface driver to use this component."


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

6563b9b0821f330239f99757a83f61b7c7f412a6a11f5fd6207faf69c3f45742 cp037781.exe

Reboot Requirement:
Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot.


Installation:

To update firmware from Windows operating system on target server:

1.     Place the Component in a temporary directory.
2.     From the same directory, run the Component by double-clicking it.
3.     When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4.     Reboot your system if you would like the update to take effect immediately.


 Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
  • Place the desired components to be updated in the directory, \packages on the USB key. To use with HP SUM 7.6.0 or earlier, place the components in \hp\swpackages on the USB Key.

Update the firmware and software in the usual manner. 
 

This component can only be executed on Windows x64.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Deliverable Name:

Advanced Power Capping Microcontroller Firmware for HPE ProLiant Gen9 Servers

Release Version:

1.0.9

Last Recommended or Critical Revision:

1.0.7

Previous Revision:

1.0.7

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Deliverable Name:

Advanced Power Capping Microcontroller Firmware for HPE ProLiant Gen9 Servers

Release Version:

1.0.9

Last Recommended or Critical Revision:

1.0.7

Previous Revision:

1.0.7

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None
Version:1.0.9(I) (27 Nov 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Version:1.0.9(H) (26 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (H) contains an update to resolve information disclosure vulnerability issue ref: CVE-2017-8992.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision (H) if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Enhancements

Added support for Microsoft Windows 10 (64-bit)


Version:1.0.9(G) (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (G) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision (G) if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Enhancements

Added support for Microsoft Windows 10 (64-bit)


Version:1.0.9(F) (21 Apr 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (F) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(E) (24 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (E) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(D) (1 Apr 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(D) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision D if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(C) (1 Oct 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (C) contains support for new server products and is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9 (30 Mar 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Version:1.0.7 (16 Sep 2014)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None

Type: Firmware - Power Management
Version: 1.0.9(I)(27 Nov 2018)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

This component updates the Advanced Power Capping Microcontroller Firmware for HPE Gen9 Servers

Installation Instructions

Prerequisites:

 The "HPE ProLiant iLO 3/4 Channel Interface Driver for Windows" must be installed and running before using this flash component. If the driver is not running you will receive the following error message:
"The software is not supported for installation on this system.
You must install the iLO Channel Interface driver to use this component."


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

6563b9b0821f330239f99757a83f61b7c7f412a6a11f5fd6207faf69c3f45742 cp037781.exe

Reboot Requirement:
Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot.


Installation:

To update firmware from Windows operating system on target server:

1.     Place the Component in a temporary directory.
2.     From the same directory, run the Component by double-clicking it.
3.     When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4.     Reboot your system if you would like the update to take effect immediately.


 Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
  • Place the desired components to be updated in the directory, \packages on the USB key. To use with HP SUM 7.6.0 or earlier, place the components in \hp\swpackages on the USB Key.

Update the firmware and software in the usual manner. 
 

This component can only be executed on Windows x64.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Deliverable Name:

Advanced Power Capping Microcontroller Firmware for HPE ProLiant Gen9 Servers

Release Version:

1.0.9

Last Recommended or Critical Revision:

1.0.7

Previous Revision:

1.0.7

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Important

Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Deliverable Name:

Advanced Power Capping Microcontroller Firmware for HPE ProLiant Gen9 Servers

Release Version:

1.0.9

Last Recommended or Critical Revision:

1.0.7

Previous Revision:

1.0.7

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Revision History

Version:1.0.9(I) (27 Nov 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Version:1.0.9(H) (26 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (H) contains an update to resolve information disclosure vulnerability issue ref: CVE-2017-8992.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision (H) if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Enhancements

Added support for Microsoft Windows 10 (64-bit)


Version:1.0.9(G) (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (G) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision (G) if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Enhancements

Added support for Microsoft Windows 10 (64-bit)


Version:1.0.9(F) (21 Apr 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (F) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(E) (24 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (E) contains support for new server products.  It is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(D) (1 Apr 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9(D) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision D if a previous component Revision was used to upgrade the firmware to version 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9(C) (1 Oct 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 1.0.9 (C) contains support for new server products and is functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to ver. 1.0.9.

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None


Version:1.0.9 (30 Mar 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Problems Fixed:

Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST.

Known Issues:

None

Version:1.0.7 (16 Sep 2014)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.