Printable version

Drivers & software

HPE MegaRAID Storage Administrator StorCLI for Windows 64-bit

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - System Management
Version: 1.25.12.0(2 Apr 2019)
Operating System(s): Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Multi-part download
File name: cp036918.compsig (2.0 KB)
File name: cp036918.exe (2.6 MB)
StorCLI is a command line interface that enables multiple users to perform maintaining, troubleshooting, and configuration functions for the MegaRAID® Gen10 controller products. It also helps you to create and manage storage configurations. StorCLI can display the status of the controller cards, virtual drives, and drives on the controller. You can use the CLI to perform system maintenance tasks, such as updating the controller firmware. This tool enables you to monitor the controllers and configure the virtual drives and drives on the controller. You can easily create new storage configurations and modify the configurations.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for the Apollo 4510 system

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

abfe81461db817d0db0ce68d31134808f8c4543140dcca6bff1a437f848bed1c cp036918.exe
c39481e66007c6acd493d1c34e132173d0a2e7d78253ffc7307576f0d7b13f71 cp036918.compsig

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To run Storcli utility from Windows operating system on target server:

Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation. The utility will automatically be installed.

When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility

For e.g: Storcli64.exe /c0 show


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Version:1.25.12.0 (2 Apr 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for the Apollo 4510 system

Version:1.24.9.0(C) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Note: Customers who already have firmware version 1.24.9.0 installed do not need to update to 1.24.9.0(C).


  • Improved integration with Smart Update Manager.

Version:1.24.9.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Customers who already have firmware version 1.24.9.0 installed do not need to update to 1.24.9.0(B).

  • Added HPE Digital Signature

Version:1.24.9.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Initial Release

Type: Software - System Management
Version: 1.25.12.0(2 Apr 2019)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

StorCLI is a command line interface that enables multiple users to perform maintaining, troubleshooting, and configuration functions for the MegaRAID® Gen10 controller products. It also helps you to create and manage storage configurations. StorCLI can display the status of the controller cards, virtual drives, and drives on the controller. You can use the CLI to perform system maintenance tasks, such as updating the controller firmware. This tool enables you to monitor the controllers and configure the virtual drives and drives on the controller. You can easily create new storage configurations and modify the configurations.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for the Apollo 4510 system

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

abfe81461db817d0db0ce68d31134808f8c4543140dcca6bff1a437f848bed1c cp036918.exe
c39481e66007c6acd493d1c34e132173d0a2e7d78253ffc7307576f0d7b13f71 cp036918.compsig

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To run Storcli utility from Windows operating system on target server:

Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation. The utility will automatically be installed.

When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility

For e.g: Storcli64.exe /c0 show


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Revision History

Version:1.25.12.0 (2 Apr 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for the Apollo 4510 system

Version:1.24.9.0(C) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Note: Customers who already have firmware version 1.24.9.0 installed do not need to update to 1.24.9.0(C).


  • Improved integration with Smart Update Manager.

Version:1.24.9.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Customers who already have firmware version 1.24.9.0 installed do not need to update to 1.24.9.0(B).

  • Added HPE Digital Signature

Version:1.24.9.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Initial Release

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.