Printable version

Drivers & software

* RECOMMENDED * *REMOVED* HPE Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for 64-bit Microsoft Windows Server 2012/2016 Editions

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - Storage
Version: 62.16.0.64(23 Sep 2016)
Operating System(s): Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download. Click the “Obtain software” link to open the HPE SC web page for the replacement version 62.16.0.64 (A). This driver provides Microsoft Windows Server 2012, 2012 R2 64-bit and 2016 support for: HPE Dynamic Smart Array B320i Controller. HPE Dynamic Smart Array B120i Controller.

Enhancements included in version 62.16.0.64:

  • Added support for Microsoft Windows Server 2016.

 

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

dba405b238a1fff5089062c82577e80b6995d8a759381b50e4b7ad0874f357dd cp029889.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download due to incorrect reboot instructions. Click the “Obtain software” link to open the HPE Support Center web page for the replacement version 62.16.0.64 (A).

Fixes included in version 62.16.0.64:

  • Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)
Version:62.16.0.64(A) (11 Aug 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)

Enhancements

Added support for Microsoft Windows Server 2016.


Version:62.16.0.64 (23 Sep 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download due to incorrect reboot instructions. Click the “Obtain software” link to open the HPE Support Center web page for the replacement version 62.16.0.64 (A).

Fixes included in version 62.16.0.64:

  • Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)
Enhancements

Enhancements included in version 62.16.0.64:

  • Added support for Microsoft Windows Server 2016.

 


Version:62.14.0.64 (1 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issue is now resolved:

Intermittent blue screen 0x133 (DPS_WATCHDOG_VIOLATION) error would display and the system would stop responding. This error was caused by a race condition that was exposed under particular IO patterns for controllers with write cache enabled.


Version:62.12.0.64 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fixes issue with SCSI Verify that can cause bug check.
  • Fixes issue where newer, larger drives may not show up during hot add.
  • Fixes potential data mismatch to RAID5 volumes when read cache is enabled and physical drive fails.

Version:62.10.0.64 (13 Mar 2014)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Fix for CA referenced below titled “SPP HOT FIX - HP ProLiant Servers: HP Dynamic Smart Array B120i/B320i Controllers - DRIVER UPGRADE REQUIRED to Ensure That a Drive Array Rebuild Does Not Target an Incorrect Drive and Cause Incorrect Data to Be Written to the Drive”
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04141183


Version:62.8.0.64 (10 Jan 2014)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


  • For the HP Dynamic Smart Array (B120i/B320i) controllers when running Microsoft Windows Server 2012 R2, corrected potential blue screen when using the Microsoft Windows Server 2012 62.6.2.64 (or earlier) version of hpsa2 driver.
  • For systems with a FBWC and HP Dynamic Smart Array B120i/B320i controllers, fixed an issue involving crash dump and cache flush. In the case where a server failure occurs, and a crash dump is generated, in some cases the FBWC was not flushing before the crash dump is written to the disk. Please find customer advisory at http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04045904
Enhancements

  • Added support for Microsoft Windows Server 2012 R2.
  • New enhancements for SCSI Verify commands.

Version:62.6.2.64 (10 Sep 2013)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


 New support for the following servers

  • HP ProLiant DL320e Gen8 v2 Server
  • HP ProLiant ML310e Gen8 v2 Server
  • HP ProLiant MicroServer Gen8
  • HP ProLiant SL210t Gen8 Server

Version:62.6.0.64 (19 Feb 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Resolved intermittent issues seen while burning to optical devices connected to B120i 

Version:62.4.0.64 (A) (26 Oct 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Support for Microsoft Windows Server 2012
Support for Microsoft Windows Server 2012 Essentials


Type: Driver - Storage
Version: 62.16.0.64(23 Sep 2016)
Operating System(s):
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016

Description

REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download. Click the “Obtain software” link to open the HPE SC web page for the replacement version 62.16.0.64 (A). This driver provides Microsoft Windows Server 2012, 2012 R2 64-bit and 2016 support for: HPE Dynamic Smart Array B320i Controller. HPE Dynamic Smart Array B120i Controller.

Enhancements

Enhancements included in version 62.16.0.64:

  • Added support for Microsoft Windows Server 2016.

 

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

dba405b238a1fff5089062c82577e80b6995d8a759381b50e4b7ad0874f357dd cp029889.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download due to incorrect reboot instructions. Click the “Obtain software” link to open the HPE Support Center web page for the replacement version 62.16.0.64 (A).

Fixes included in version 62.16.0.64:

  • Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)

Revision History

Version:62.16.0.64(A) (11 Aug 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)

Enhancements

Added support for Microsoft Windows Server 2016.


Version:62.16.0.64 (23 Sep 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED: Hpsa driver version 62.16.0.64 is NO LONGER AVAILABLE for download due to incorrect reboot instructions. Click the “Obtain software” link to open the HPE Support Center web page for the replacement version 62.16.0.64 (A).

Fixes included in version 62.16.0.64:

  • Fixes a BSOD issue that allows the HPE Dynamic Smart Array B320i/B120i Controller to run in a system with higher than 128 CPU (cores)
Enhancements

Enhancements included in version 62.16.0.64:

  • Added support for Microsoft Windows Server 2016.

 


Version:62.14.0.64 (1 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issue is now resolved:

Intermittent blue screen 0x133 (DPS_WATCHDOG_VIOLATION) error would display and the system would stop responding. This error was caused by a race condition that was exposed under particular IO patterns for controllers with write cache enabled.


Version:62.12.0.64 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fixes issue with SCSI Verify that can cause bug check.
  • Fixes issue where newer, larger drives may not show up during hot add.
  • Fixes potential data mismatch to RAID5 volumes when read cache is enabled and physical drive fails.

Version:62.10.0.64 (13 Mar 2014)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Fix for CA referenced below titled “SPP HOT FIX - HP ProLiant Servers: HP Dynamic Smart Array B120i/B320i Controllers - DRIVER UPGRADE REQUIRED to Ensure That a Drive Array Rebuild Does Not Target an Incorrect Drive and Cause Incorrect Data to Be Written to the Drive”
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04141183


Version:62.8.0.64 (10 Jan 2014)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


  • For the HP Dynamic Smart Array (B120i/B320i) controllers when running Microsoft Windows Server 2012 R2, corrected potential blue screen when using the Microsoft Windows Server 2012 62.6.2.64 (or earlier) version of hpsa2 driver.
  • For systems with a FBWC and HP Dynamic Smart Array B120i/B320i controllers, fixed an issue involving crash dump and cache flush. In the case where a server failure occurs, and a crash dump is generated, in some cases the FBWC was not flushing before the crash dump is written to the disk. Please find customer advisory at http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04045904
Enhancements

  • Added support for Microsoft Windows Server 2012 R2.
  • New enhancements for SCSI Verify commands.

Version:62.6.2.64 (10 Sep 2013)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


 New support for the following servers

  • HP ProLiant DL320e Gen8 v2 Server
  • HP ProLiant ML310e Gen8 v2 Server
  • HP ProLiant MicroServer Gen8
  • HP ProLiant SL210t Gen8 Server

Version:62.6.0.64 (19 Feb 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Resolved intermittent issues seen while burning to optical devices connected to B120i 

Version:62.4.0.64 (A) (26 Oct 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Support for Microsoft Windows Server 2012
Support for Microsoft Windows Server 2012 Essentials


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.