Printable version

Drivers & software

HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 7 Server

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - System Management
Version: 10.3.0(1 Oct 2015)
Operating System(s): Red Hat Enterprise Linux 7 Server
File name: hp-health-10.30-1752.15.rhel7.x86_64.rpm (349 KB)
The HP System Health Application and Command Line Utilities (hp-health) is collection of applications and tools which enables monitoring of fans, power supplies, temperature sensors, and other management events. It also provides collection of command-line utilities: the ProLiant boot configuration utility (hpbootcfg), the ProLiant Management Command Line Interface Utility (hpasmcli), the ProLiant Integrated Management Log (IML) Utility (hplog), and the UID (blue) Light Utility (hpuid).

  • Added support for new HP ProLiant Gen9 Servers.
  • Added support for Systemd.

Prerequisites:

The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-health, type:

      rpm –qp –requires hp-health-< version >.rpm

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

0f2b070b999a8fa80334e0654ea4c194189c8db0d6cb72024b36c009f1c7bb25 hp-health-10.30-1752.15.rhel7.x86_64.rpm

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

      rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

      /etc/init.d/hp-health status

Additional help is available by typing:

      man hp-health

            or

      man hp_mgmt_install

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

  • Initital Program Load(IPL) devices are displayed correctly after disabling NICs.
Version:10.9.2 (5 Oct 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • When a customer queries the HPE Software Delivery Repository (SDR) site and experiences a failure amsd no longer exhibits a segfault.
  • hp-heath service will no longer crash in a non secure boot environment.

Version:10.9.0 (2 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • Modified the loop initial values in hpasmcli from 2 to 0.
  • Modifications to check the read and write variables to match RBSU in Legacy and UEFI mode
  • Updated the hpasmcli check string to correctly report the impitool information.
  • Remove the redundant serial embedded and com ports
  • Addressed IML message size limitation from 36 to 212 bytes
  • Support for hp-health in OS security boot
  • Added supporting “quote mark” in SET NAME command
  • Enabled to set PXE as boot first 

Version:10.8.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:
◾Add a new constraint to avoid buffer overflow while retrieving device information.

Version:10.7.0 (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • Extend the SPD size for DDR4 memory.

Version:10.6.0(a) (15 Sep 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • File permissions for hp-health services
  • HPSUM discovery works with G7 platforms
Enhancements

  • Fixed hp-health to work with linux kernel versions 4.X

Version:10.6.0 (21 Apr 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Fixed file permissions for hp-health services
Enhancements

  • Fixed hp-health to work with linux kernel versions 4.X

Version:10.5.0 (24 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • iLO reset doesn't affect running hp-health service.
  • Fixed an issue where hp-health was consuming 100% CPU utilization on hpasmxld (iLO2).
  • After modifying execution order of asr and hp-health service, hp-asrd runs properly.
  • Fixed hp-health and iLO target connectivity issue.
  • The hpasmcli command 'show server' now displays embedded NICs.
Enhancements

Added support for new HPE ProLiant Gen9 Servers.

Version:10.4.0 (1 Apr 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Complete ROM Version is displayed in hpasmcli tool.
Enhancements

Added support for new HPE ProLiant Gen9 Servers.

Version:10.3.0 (1 Oct 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

  • Initital Program Load(IPL) devices are displayed correctly after disabling NICs.
Enhancements

  • Added support for new HP ProLiant Gen9 Servers.
  • Added support for Systemd.

Version:10.2.0 (15 Jun 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

Threshold Temperature will not be displayed for Not Installed Sensors
Enhancements

Added support for new HP ProLiant Gen9 Servers.

Version:10.1.0 (30 Mar 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:
  • Threshold Temperature will not be displayed for Not Installed Sensors
Enhancements

Added support for new HP ProLiant Gen9 Servers.

Version:10.0.0 (9 Sep 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.

Type: Software - System Management
Version: 10.3.0(1 Oct 2015)
Operating System(s):
Red Hat Enterprise Linux 7 Server

Description

The HP System Health Application and Command Line Utilities (hp-health) is collection of applications and tools which enables monitoring of fans, power supplies, temperature sensors, and other management events. It also provides collection of command-line utilities: the ProLiant boot configuration utility (hpbootcfg), the ProLiant Management Command Line Interface Utility (hpasmcli), the ProLiant Integrated Management Log (IML) Utility (hplog), and the UID (blue) Light Utility (hpuid).

Enhancements

  • Added support for new HP ProLiant Gen9 Servers.
  • Added support for Systemd.

Installation Instructions

Prerequisites:

The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-health, type:

      rpm –qp –requires hp-health-< version >.rpm

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

0f2b070b999a8fa80334e0654ea4c194189c8db0d6cb72024b36c009f1c7bb25 hp-health-10.30-1752.15.rhel7.x86_64.rpm

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

      rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

      /etc/init.d/hp-health status

Additional help is available by typing:

      man hp-health

            or

      man hp_mgmt_install

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

  • Initital Program Load(IPL) devices are displayed correctly after disabling NICs.

Revision History

Version:10.9.2 (5 Oct 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • When a customer queries the HPE Software Delivery Repository (SDR) site and experiences a failure amsd no longer exhibits a segfault.
  • hp-heath service will no longer crash in a non secure boot environment.

Version:10.9.0 (2 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • Modified the loop initial values in hpasmcli from 2 to 0.
  • Modifications to check the read and write variables to match RBSU in Legacy and UEFI mode
  • Updated the hpasmcli check string to correctly report the impitool information.
  • Remove the redundant serial embedded and com ports
  • Addressed IML message size limitation from 36 to 212 bytes
  • Support for hp-health in OS security boot
  • Added supporting “quote mark” in SET NAME command
  • Enabled to set PXE as boot first 

Version:10.8.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:
◾Add a new constraint to avoid buffer overflow while retrieving device information.

Version:10.7.0 (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • Extend the SPD size for DDR4 memory.

Version:10.6.0(a) (15 Sep 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed the following items:

  • File permissions for hp-health services
  • HPSUM discovery works with G7 platforms
Enhancements

  • Fixed hp-health to work with linux kernel versions 4.X

Version:10.6.0 (21 Apr 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Fixed file permissions for hp-health services
Enhancements

  • Fixed hp-health to work with linux kernel versions 4.X

Version:10.5.0 (24 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • iLO reset doesn't affect running hp-health service.
  • Fixed an issue where hp-health was consuming 100% CPU utilization on hpasmxld (iLO2).
  • After modifying execution order of asr and hp-health service, hp-asrd runs properly.
  • Fixed hp-health and iLO target connectivity issue.
  • The hpasmcli command 'show server' now displays embedded NICs.
Enhancements

Added support for new HPE ProLiant Gen9 Servers.

Version:10.4.0 (1 Apr 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Complete ROM Version is displayed in hpasmcli tool.
Enhancements

Added support for new HPE ProLiant Gen9 Servers.

Version:10.3.0 (1 Oct 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

  • Initital Program Load(IPL) devices are displayed correctly after disabling NICs.
Enhancements

  • Added support for new HP ProLiant Gen9 Servers.
  • Added support for Systemd.

Version:10.2.0 (15 Jun 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:

Threshold Temperature will not be displayed for Not Installed Sensors
Enhancements

Added support for new HP ProLiant Gen9 Servers.

Version:10.1.0 (30 Mar 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed following issue:
  • Threshold Temperature will not be displayed for Not Installed Sensors
Enhancements

Added support for new HP ProLiant Gen9 Servers.

Version:10.0.0 (9 Sep 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.