Type: |
Driver - System Management |
Version: |
3.30.0.0(24 Oct 2016) |
Operating System(s): |
Microsoft Windows Server 2016
|
|
Description
The iLO 3/4 Channel Interface Driver allows software to communicate with the iLO 3 or iLO 4 management controller. The driver is used by the ProLiant Health Monitor, Insight Management Agents and WBEM Providers, Agentless Management Service, and other utilities.
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release to support Windows Server 2016.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:
65982c807b91f957afdb29acf2f60276582cc5370756086ae0dc82cc029f119d |
cp030671.exe |
Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Release Notes
Revision History
Version:4.1.0.0 (9 Sep 2019)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.
Version:4.0.0.0 (27 Nov 2018)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Add support for Windows Server 2019.
Version:3.31.0.0 (26 Jun 2018)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.
Version:3.30.0.0 (24 Oct 2016)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release to support Windows Server 2016.