Printable version

Drivers & software

** CRITICAL ** Online ROM Flash for Linux - HPE Gen10 Innovation Engine Firmware for HPE Gen10 Servers

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - System
Version: 0.1.5.2(11 Dec 2017)
Operating System(s): Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12
Multi-part download
File name: firmware-iegen10-0.1.5.2-1.1.x86_64.compsig (2.0 KB)
File name: firmware-iegen10-0.1.5.2-1.1.x86_64.rpm (13 MB)
This component provides updated IE firmware that can be installed directly on supported Operating Systems.

Prerequisites:

System ROM V1.26 or later

The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

77d4fac733a30f8babf4277452aebfbcd3f95feb1c08905eb69e281677c0591a RPMS/x86_64/firmware-iegen10-0.1.5.2-1.1.x86_64.compsig
ceb57288ab1930a5c9fcd45e420c28d12930590f1e754b23511cd808c1b9daa2 RPMS/x86_64/firmware-iegen10-0.1.5.2-1.1.x86_64.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:


To update firmware from Linux operating system on target server:
 
Install the RPM package
> rpm -Uvh <filename>.rpm
 
See where the files land
> rpm -qlp <filename>.rpm
 
Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Reboot your system for the update to take effect immediately.

 


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important:

Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Deliverable Name:

HPE Gen10 Innovation Engine Firmware  

Release Version:

0.1.5.2  

Last Recommended or Critical Revision:

0.1.5.2  

Previous Revision:

0.1.4.4  

Firmware Dependencies:

System ROM V1.26 or later  

Enhancements/New Features:

None

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Deliverable Name:

HPE Gen10 Innovation Engine Firmware  

Release Version:

0.1.5.2  

Last Recommended or Critical Revision:

0.1.5.2  

Previous Revision:

0.1.4.4  

Firmware Dependencies:

System ROM V1.26 or later  

Enhancements/New Features:

None

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Version:0.2.2.0 (1 Apr 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Problems Fixed:

Addressed an extremely rare issue where Processor or Memory temperature reporting may not be collected properly by the platform and the system fans may be running faster than expected. This issue has been seen occasionally after a server reboot and is typically corrected with a subsequent server reboot.

Known Issues:

None

Version:0.2.1.2(B) (1 Jul 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Added support for HPE Persistent Memory featuring Intel Optane DC Persistent Memory.

Known Issues:

None


Version:0.2.0.11 (2 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None  

Firmware Dependencies:

None  

Problems Fixed:

Addressed an extremely rare issue where updates to the Intel Server Platform Services (SPS) firmware may fail.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.
Enhancements

Added support for Intel Xeon Scalable Performance 3200, 4200, 5200, 6200 and 8200 series processors.

Added support for HPE system performance monitoring and workload performance advisor. This feature also requires Integrated Lights-Out (iLO) firmware version 1.40 or later.


Version:0.1.6.1(C) (7 Dec 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 0.1.6.1(C) contains updates to the component packaging and is functionally equivalent to ver. 0.1.6.1.  It is not necessary to upgrade with Revision C if a previous component Revision was used to upgrade the firmware to version 0.1.6.1.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where the Integrated Lights-Out (iLO) web interface may incorrectly report the Innovation Engine is running in a degraded state.

Addressed an issue where memory telemetry data may not be reported properly in the Integrated Lights-Out (iLO) web interface or through the HPE RESTful API.

Addressed an issue where the Innovation Engine Firmware flash would fail if a previous flash attempt was interrupted and not completed successfully.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Version:0.1.6.1 (8 May 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None  

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where the Integrated Lights-Out (iLO) web interface may incorrectly report the Innovation Engine is running in a degraded state.

Addressed an issue where memory telemetry data may not be reported properly in the Integrated Lights-Out (iLO) web interface or through the HPE RESTful API.

Addressed an issue where the Innovation Engine Firmware flash would fail if a previous flash attempt was interrupted and not completed successfully.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Version:0.1.5.2 (11 Dec 2017)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Version:0.1.4.4 (16 Nov 2017)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


REMOVED - HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

An HPE Customer Advisory will soon be published with more information on the issues that resulted in the removal of IE Firmware version 0.1.4.4.

HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 replaces IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.  

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers. 

Important Notes:

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.4.4. System ROM V1.26 must be installed prior to updating to IE FW 0.1.4.4. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  

Firmware Dependencies:

System ROM V1.26  

Problems Fixed:

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.4.4. System ROM V1.26 must be installed prior to updating to IE FW 0.1.4.4. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers. 

Known Issues:

None

Enhancements

None


Version:0.1.2.6 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Important Notes:

 None  

Firmware Dependencies:

 None  

Problems Fixed:

Addressed an issue where HPE Jitter support may not respond to configuration changes from the Integrated Lights-Out webpage. 

Known Issues:

 None

Enhancements

REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Added support for HPE Core Boost Technology.


Version:0.1.0.28 (12 Jul 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None


Type: Firmware - System
Version: 0.1.5.2(11 Dec 2017)
Operating System(s):
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12

Description

This component provides updated IE firmware that can be installed directly on supported Operating Systems.

Installation Instructions

Prerequisites:

System ROM V1.26 or later

The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

77d4fac733a30f8babf4277452aebfbcd3f95feb1c08905eb69e281677c0591a RPMS/x86_64/firmware-iegen10-0.1.5.2-1.1.x86_64.compsig
ceb57288ab1930a5c9fcd45e420c28d12930590f1e754b23511cd808c1b9daa2 RPMS/x86_64/firmware-iegen10-0.1.5.2-1.1.x86_64.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:


To update firmware from Linux operating system on target server:
 
Install the RPM package
> rpm -Uvh <filename>.rpm
 
See where the files land
> rpm -qlp <filename>.rpm
 
Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Reboot your system for the update to take effect immediately.

 


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important:

Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Deliverable Name:

HPE Gen10 Innovation Engine Firmware  

Release Version:

0.1.5.2  

Last Recommended or Critical Revision:

0.1.5.2  

Previous Revision:

0.1.4.4  

Firmware Dependencies:

System ROM V1.26 or later  

Enhancements/New Features:

None

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Important

Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Deliverable Name:

HPE Gen10 Innovation Engine Firmware  

Release Version:

0.1.5.2  

Last Recommended or Critical Revision:

0.1.5.2  

Previous Revision:

0.1.4.4  

Firmware Dependencies:

System ROM V1.26 or later  

Enhancements/New Features:

None

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Revision History

Version:0.2.2.0 (1 Apr 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Problems Fixed:

Addressed an extremely rare issue where Processor or Memory temperature reporting may not be collected properly by the platform and the system fans may be running faster than expected. This issue has been seen occasionally after a server reboot and is typically corrected with a subsequent server reboot.

Known Issues:

None

Version:0.2.1.2(B) (1 Jul 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Added support for HPE Persistent Memory featuring Intel Optane DC Persistent Memory.

Known Issues:

None


Version:0.2.0.11 (2 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None  

Firmware Dependencies:

None  

Problems Fixed:

Addressed an extremely rare issue where updates to the Intel Server Platform Services (SPS) firmware may fail.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.
Enhancements

Added support for Intel Xeon Scalable Performance 3200, 4200, 5200, 6200 and 8200 series processors.

Added support for HPE system performance monitoring and workload performance advisor. This feature also requires Integrated Lights-Out (iLO) firmware version 1.40 or later.


Version:0.1.6.1(C) (7 Dec 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

Ver. 0.1.6.1(C) contains updates to the component packaging and is functionally equivalent to ver. 0.1.6.1.  It is not necessary to upgrade with Revision C if a previous component Revision was used to upgrade the firmware to version 0.1.6.1.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where the Integrated Lights-Out (iLO) web interface may incorrectly report the Innovation Engine is running in a degraded state.

Addressed an issue where memory telemetry data may not be reported properly in the Integrated Lights-Out (iLO) web interface or through the HPE RESTful API.

Addressed an issue where the Innovation Engine Firmware flash would fail if a previous flash attempt was interrupted and not completed successfully.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Version:0.1.6.1 (8 May 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important Notes:

None  

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where the Integrated Lights-Out (iLO) web interface may incorrectly report the Innovation Engine is running in a degraded state.

Addressed an issue where memory telemetry data may not be reported properly in the Integrated Lights-Out (iLO) web interface or through the HPE RESTful API.

Addressed an issue where the Innovation Engine Firmware flash would fail if a previous flash attempt was interrupted and not completed successfully.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.

Version:0.1.5.2 (11 Dec 2017)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

 HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 to replace IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.

Firmware Dependencies:

System ROM V1.26 or later  

Problems Fixed:

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Addressed an issue where systems configured with Innovation Engine Firmware 0.1.4.4 and the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

Known Issues:

This flash component will report the Current Revision of the Innovation Engine FW as “n/a” when updating the Innovation Engine FW. This does not affect the flash update or impact how the Innovation Engine FW operates.


Version:0.1.4.4 (16 Nov 2017)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


REMOVED - HPE Innovation Engine (IE) Firmware 0.1.4.4 has been removed from the web for the following reasons:

1. Systems could experience a rare issue where processor and memory temperatures stop reporting, resulting in increased system fan speeds. This issue is seen during a system reboot and is only recovered by another system reset. This issue did not exist with previous versions of the Innovation Engine Firmware.

2. Systems configured with Jitter Smoothing support could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

3. Systems configured with the Intel Xeon Scalable 6143 Gold and 8165 Platinum processors with HPE’s Core Boosting support enabled could experience a rare issue where on a given boot the functionality does not function. Resetting the system typically corrects the issue. This issue did not exist with previous versions of the Innovation Engine Firmware.

An HPE Customer Advisory will soon be published with more information on the issues that resulted in the removal of IE Firmware version 0.1.4.4.

HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.5.2 replaces IE version 0.1.4.4. If updating from IE version 0.1.4.4, follow the installation notes. If updating from an IE version prior to 0.1.4.4 please read the following note.  

System ROM V1.26 must be installed prior to updating to IE FW 0.1.5.2. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). The details regarding these security vulnerabilities were published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers. 

Important Notes:

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.4.4. System ROM V1.26 must be installed prior to updating to IE FW 0.1.4.4. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  

Firmware Dependencies:

System ROM V1.26  

Problems Fixed:

This is a new release of HPE Gen10 Innovation Engine (IE) Firmware revision 0.1.4.4. System ROM V1.26 must be installed prior to updating to IE FW 0.1.4.4. This revision of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers. 

Known Issues:

None

Enhancements

None


Version:0.1.2.6 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Important Notes:

 None  

Firmware Dependencies:

 None  

Problems Fixed:

Addressed an issue where HPE Jitter support may not respond to configuration changes from the Integrated Lights-Out webpage. 

Known Issues:

 None

Enhancements

REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Added support for HPE Core Boost Technology.


Version:0.1.0.28 (12 Jul 2017)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED – Version 0.1.2.6 and 0.1.0.28 of HPE Gen10 Innovation Engine (IE) Firmware are NO LONGER AVAILABLE for download. Please use the replacement version 0.1.4.4 or later versions.

Version 0.1.4.4 of the IE FW is required for updating the Intel Platform Service (SPS) Firmware revision 04.00.04.288 and later. It should be installed prior to updating to SPS FW 04.00.04.288 or later. SPS FW 04.00.04.288 mitigates security vulnerability CVE-2017-5706 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5706) and CVE-2017-5709 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5709). It is anticipated that details regarding these security vulnerabilities will be published to these links on November 20,2017. These security vulnerabilities are not unique to HPE servers.  System ROM version 1.26 or later must be installed prior to updating to IE FW 0.1.4.4.

Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.