Printable version

Drivers & software

HPE SYNERGY SOFTWARE RELEASES: COMPOSER 5.00.02 and IMAGE STREAMER 5.00.01

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware (Login Required) - System
Version: Comp5.00.02-ImgStmr5.00.01(27 Feb 2020)
Operating System(s): OS Independent
Welcome to the support page for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01. Open the Important tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination.

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 5.00.02

HPE Synergy Composer 5.00.02 adds the following enhancements:

  • HPE Synergy integration with Cisco ACI

  • HPE Synergy static IP Addressing

  • IGMP Multicast enhancements

For a complete list of enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324

HPE Synergy Custom SPP 2019.03.20200324 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.09.20200325

HPE Synergy Custom SPP 2019.09.20200325 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.12.20200326

HPE Synergy Custom SPP 2019.12.20200326 offers no new enhancements.

For a list of fixes, see the Fixes tab.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

96972a526818902e0a04506e54d20d59db153f92f7c5ce43e2b0497c7f937ed4 ICM-SynergySWComposer5.00.02-ImageStreamer5.00.01.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Upgrading to HPE Synergy 5.00.02 on an HPE Synergy Composer (1st Gen)

IMPORTANT:

Before performing an HPE OneView update, Hewlett Packard Enterprise recommends you use the HPE OneView Update Readiness Checker. The Update Readiness Checker is provided for HPE OneView users to evaluate the health of their HPE OneView appliance for a set of known conditions before proceeding with an appliance update. To download the checker, go to http://www.hpe.com/support/ov-urc.

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen). See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

Any HPE OneView 4.20.01 or later can be upgraded to version 5.00.02.

HPE Synergy Composer upgrade time

Upgrading HPE OneView 5.00.02 on an HPE Synergy Composer (1st gen) requires more time than earlier releases.

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

Refer to the HPE OneView for Synergy and HPE Synergy Image Streamer release notes for specific update times and general update requirements.

HPE Synergy Management combination update

Review the following documentation before updating to HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on updating HPE Synergy, see the Hewlett Packard Enterprise Information Library.

The HPE Synergy Software Overview Guide provides detailed references and overviews of the software and configuration utilities to support HPE Synergy. The guide is task-based and covers the documentation and resources for all supported software and configuration utilities available for:

  • HPE Synergy setup and configuration

  • OS deployment

  • Firmware updates

  • Troubleshooting

  • Remote support

HPE OneView for HPE Synergy Firmware and Driver Update Guide provides information for updating HPE Synergy firmware and drivers through HPE Synergy Composer, powered by HPE OneView.

System ROM installation

HPE Synergy supports updating System ROMs for HPE Synergy Compute Modules independently of installing the System ROMs included in the HPE Synergy Custom SPP.

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

Links

The HPE Synergy Software Release Information page provides access to the following tools.

  • HPE Synergy Firmware Comparison Tool

  • HPE Synergy Upgrade Paths Table

  • HPE Synergy Firmware Feature Comparison Table

  • VMware OS Support Tool for HPE Synergy

VMware Support for HPE Synergy Software Releases

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

HPE Synergy Composer 5.00.02

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen).

See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

IMPORTANT:

HPE Synergy Custom SPPs based on 2019.12.0 contain HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

NOTE:

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

For a complete list of fixes and enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes and enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions.

To view specific VMware support information for HPE Synergy, see the VMware OS Support Tool for HPE Synergy on the HPE Synergy Software Release Information site.

Supported HPE Synergy Custom SPPs

The following HPE Synergy Custom SPPs are supported with this HPE Synergy Management combination.

For additional supported HPE Synergy Custom SPPs, see "Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination" in the Release Notes tab.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 is built on HPE Synergy Custom SPP 2019.03.20200123, based on the core Service Pack for ProLiant (SPP) Version 2019.03.1, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20200324 includes firmware/driver updates for:

Operating System support

The following operating systems are supported:

  • Microsoft Windows Server 2019 - All Editions

  • Microsoft Windows Server 2016 - All Editions

  • Microsoft Windows Server 2012 R2 - All Editions

  • Microsoft Windows Server 2012 All Editions (not supported on Gen10 platforms)

  • Microsoft Windows Server 2012 All Essentials (not supported on Gen10 platforms)

  • Red Hat Enterprise Linux 7.6, 7.5

  • SUSE Linux Enterprise Server 15 (Initial)

  • SUSE Linux Enterprise Server 12 SP4, 12 SP3

  • VMware ESXi 6.0 U3

  • VMware ESXi 6.5 U2, U3

  • VMware ESXi 6.7 U2, U3

    (for specific HPE ESXi image support see VMware support with HPE Synergy Custom SPPs)

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 is built on HPE Synergy Custom SPP 2019.09.20190926, based on the core Service Pack for ProLiant (SPP) Version 2019.09.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.09.20200325 includes firmware/driver updates for:

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 is built on HPE Synergy Custom SPP 2019.12.20200125, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.12.20200326 includes firmware/driver updates for:


Notes:

Links

The HPE Synergy Software Release Information page provides access to the following tools.

  • HPE Synergy Firmware Comparison Tool

  • HPE Synergy Upgrade Paths Table

  • HPE Synergy Firmware Feature Comparison Table

  • VMware OS Support Tool for HPE Synergy

VMware Support for HPE Synergy Software Releases

Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination

For information on the most current HPE Synergy Custom SPPs supported by this HPE Synergy Management combination, see the Important tab.

HPE Synergy Custom SPP 2019.12.20200125 - January 2020

HPE Synergy Custom SPP 2019.12.20200125 is built on HPE Synergy Custom SPP 2019.12.20191219, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.12.20200124 - January 2020

HPE Synergy Custom SPP 2019.12.20200124 is built on HPE Synergy Custom SPP 2019.12.20191219, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20200123 - January 2020

HPE Synergy Custom SPP 2019.03.20200123 is built on HPE Synergy Custom SPP 2019.03.20191029, based on the core Service Pack for ProLiant (SPP) Version 2019.03.0, and provides the fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.12.20191219 - December 2019

HPE Synergy Custom SPP 2019.12.20191219 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

IMPORTANT:

This HPE Synergy Custom SPP contains HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

HPE Synergy Custom SPP 2019.03.20191029 - October 2019

HPE Synergy Custom SPP 2019.03.20191029 is built on HPE Synergy Custom SPP 2019.03.20190825 and provides fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20191029 is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.09.20190926 - Sept 2019

HPE Synergy Custom SPP 2019.09.20190926 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.09.20190925 - Sept 2019

HPE Synergy Custom SPP 2019.09.20190926 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190826 - Aug 2019

HPE Synergy Custom SPP 2019.03.20190826 is built on HPE Synergy Custom SPP 2019.03.20190718 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190825 - Aug 2019

HPE Synergy Custom SPP 2019.03.20190825 is built on HPE Synergy Custom SPP 2019.03.20190718 and provides fixes for HPE Synergy firmware components. HPE Synergy Custom SPP 2019.03.20190825 is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190718 - July 2019

HPE Synergy Custom SPP 2019.03.20190718 is built on HPE Synergy Custom SPP 2019.03.20190612 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190612 - June 2019

HPE Synergy Custom SPP 2019.03.20190612 is built on HPE Synergy Custom SPP 2019.03.20190514 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190514 - May 2019

HPE Synergy Custom SPP 2019.03.20190514 - May 2019 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190401 - Apr 2019

HPE Synergy Custom SPP 2019.03.20190401 - Apr 2019 provides the latest enhancements for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20190405 - Feb 2019 (HPE Synergy Custom SPP 2018.11.20190205)

NOTE:

HPE Synergy Custom SPP 2018.11.20190405 replaces HPE Synergy Custom SPP 2018.11.20190205.

HPE Synergy Custom SPP 2018.11.20190405 is based on the 2018.11.0 core Service Pack for ProLiant (SPP).

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the enhancements for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the HPE Synergy Firmware Comparison Tool.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

HPE Synergy Composer 5.00.02

For a complete list of fixes, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controllers, HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy, Gen9 and Gen10 System ROMs, and other fixes. Additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.09.0 Release Notes.

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.12.0 Release Notes.

System ROM updates

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on the latest available System ROMs, see the Hewlett Packard Enterprise Support Center.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs

HPE Synergy Composer 5.00.02

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen).

See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

IMPORTANT:

HPE Synergy Custom SPPs based on 2019.12.0 contain HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

NOTE:

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

For a complete list of fixes and enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes and enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions.

To view specific VMware support information for HPE Synergy, see the VMware OS Support Tool for HPE Synergy on the HPE Synergy Software Release Information site.

Supported HPE Synergy Custom SPPs

The following HPE Synergy Custom SPPs are supported with this HPE Synergy Management combination.

For additional supported HPE Synergy Custom SPPs, see "Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination" in the Release Notes tab.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 is built on HPE Synergy Custom SPP 2019.03.20200123, based on the core Service Pack for ProLiant (SPP) Version 2019.03.1, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20200324 includes firmware/driver updates for:

Operating System support

The following operating systems are supported:

  • Microsoft Windows Server 2019 - All Editions

  • Microsoft Windows Server 2016 - All Editions

  • Microsoft Windows Server 2012 R2 - All Editions

  • Microsoft Windows Server 2012 All Editions (not supported on Gen10 platforms)

  • Microsoft Windows Server 2012 All Essentials (not supported on Gen10 platforms)

  • Red Hat Enterprise Linux 7.6, 7.5

  • SUSE Linux Enterprise Server 15 (Initial)

  • SUSE Linux Enterprise Server 12 SP4, 12 SP3

  • VMware ESXi 6.0 U3

  • VMware ESXi 6.5 U2, U3

  • VMware ESXi 6.7 U2, U3

    (for specific HPE ESXi image support see VMware support with HPE Synergy Custom SPPs)

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 is built on HPE Synergy Custom SPP 2019.09.20190926, based on the core Service Pack for ProLiant (SPP) Version 2019.09.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.09.20200325 includes firmware/driver updates for:

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 is built on HPE Synergy Custom SPP 2019.12.20200125, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.12.20200326 includes firmware/driver updates for:

Version:Comp5.00.02-ImgStmr5.00.01 (27 Feb 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

HPE Synergy Composer 5.00.02

For a complete list of fixes, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controllers, HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy, Gen9 and Gen10 System ROMs, and other fixes. Additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.09.0 Release Notes.

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.12.0 Release Notes.

System ROM updates

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on the latest available System ROMs, see the Hewlett Packard Enterprise Support Center.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 5.00.02

HPE Synergy Composer 5.00.02 adds the following enhancements:

  • HPE Synergy integration with Cisco ACI

  • HPE Synergy static IP Addressing

  • IGMP Multicast enhancements

For a complete list of enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324

HPE Synergy Custom SPP 2019.03.20200324 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.09.20200325

HPE Synergy Custom SPP 2019.09.20200325 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.12.20200326

HPE Synergy Custom SPP 2019.12.20200326 offers no new enhancements.

For a list of fixes, see the Fixes tab.


Type: Firmware (Login Required) - System
Version: Comp5.00.02-ImgStmr5.00.01(27 Feb 2020)
Operating System(s):
OS Independent

Description

Welcome to the support page for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01. Open the Important tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination.

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 5.00.02

HPE Synergy Composer 5.00.02 adds the following enhancements:

  • HPE Synergy integration with Cisco ACI

  • HPE Synergy static IP Addressing

  • IGMP Multicast enhancements

For a complete list of enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324

HPE Synergy Custom SPP 2019.03.20200324 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.09.20200325

HPE Synergy Custom SPP 2019.09.20200325 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.12.20200326

HPE Synergy Custom SPP 2019.12.20200326 offers no new enhancements.

For a list of fixes, see the Fixes tab.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

96972a526818902e0a04506e54d20d59db153f92f7c5ce43e2b0497c7f937ed4 ICM-SynergySWComposer5.00.02-ImageStreamer5.00.01.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Upgrading to HPE Synergy 5.00.02 on an HPE Synergy Composer (1st Gen)

IMPORTANT:

Before performing an HPE OneView update, Hewlett Packard Enterprise recommends you use the HPE OneView Update Readiness Checker. The Update Readiness Checker is provided for HPE OneView users to evaluate the health of their HPE OneView appliance for a set of known conditions before proceeding with an appliance update. To download the checker, go to http://www.hpe.com/support/ov-urc.

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen). See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

Any HPE OneView 4.20.01 or later can be upgraded to version 5.00.02.

HPE Synergy Composer upgrade time

Upgrading HPE OneView 5.00.02 on an HPE Synergy Composer (1st gen) requires more time than earlier releases.

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

Refer to the HPE OneView for Synergy and HPE Synergy Image Streamer release notes for specific update times and general update requirements.

HPE Synergy Management combination update

Review the following documentation before updating to HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on updating HPE Synergy, see the Hewlett Packard Enterprise Information Library.

The HPE Synergy Software Overview Guide provides detailed references and overviews of the software and configuration utilities to support HPE Synergy. The guide is task-based and covers the documentation and resources for all supported software and configuration utilities available for:

  • HPE Synergy setup and configuration

  • OS deployment

  • Firmware updates

  • Troubleshooting

  • Remote support

HPE OneView for HPE Synergy Firmware and Driver Update Guide provides information for updating HPE Synergy firmware and drivers through HPE Synergy Composer, powered by HPE OneView.

System ROM installation

HPE Synergy supports updating System ROMs for HPE Synergy Compute Modules independently of installing the System ROMs included in the HPE Synergy Custom SPP.

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

Links

The HPE Synergy Software Release Information page provides access to the following tools.

  • HPE Synergy Firmware Comparison Tool

  • HPE Synergy Upgrade Paths Table

  • HPE Synergy Firmware Feature Comparison Table

  • VMware OS Support Tool for HPE Synergy

VMware Support for HPE Synergy Software Releases

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

HPE Synergy Composer 5.00.02

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen).

See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

IMPORTANT:

HPE Synergy Custom SPPs based on 2019.12.0 contain HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

NOTE:

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

For a complete list of fixes and enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes and enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions.

To view specific VMware support information for HPE Synergy, see the VMware OS Support Tool for HPE Synergy on the HPE Synergy Software Release Information site.

Supported HPE Synergy Custom SPPs

The following HPE Synergy Custom SPPs are supported with this HPE Synergy Management combination.

For additional supported HPE Synergy Custom SPPs, see "Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination" in the Release Notes tab.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 is built on HPE Synergy Custom SPP 2019.03.20200123, based on the core Service Pack for ProLiant (SPP) Version 2019.03.1, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20200324 includes firmware/driver updates for:

Operating System support

The following operating systems are supported:

  • Microsoft Windows Server 2019 - All Editions

  • Microsoft Windows Server 2016 - All Editions

  • Microsoft Windows Server 2012 R2 - All Editions

  • Microsoft Windows Server 2012 All Editions (not supported on Gen10 platforms)

  • Microsoft Windows Server 2012 All Essentials (not supported on Gen10 platforms)

  • Red Hat Enterprise Linux 7.6, 7.5

  • SUSE Linux Enterprise Server 15 (Initial)

  • SUSE Linux Enterprise Server 12 SP4, 12 SP3

  • VMware ESXi 6.0 U3

  • VMware ESXi 6.5 U2, U3

  • VMware ESXi 6.7 U2, U3

    (for specific HPE ESXi image support see VMware support with HPE Synergy Custom SPPs)

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 is built on HPE Synergy Custom SPP 2019.09.20190926, based on the core Service Pack for ProLiant (SPP) Version 2019.09.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.09.20200325 includes firmware/driver updates for:

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 is built on HPE Synergy Custom SPP 2019.12.20200125, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.12.20200326 includes firmware/driver updates for:


Notes:

Links

The HPE Synergy Software Release Information page provides access to the following tools.

  • HPE Synergy Firmware Comparison Tool

  • HPE Synergy Upgrade Paths Table

  • HPE Synergy Firmware Feature Comparison Table

  • VMware OS Support Tool for HPE Synergy

VMware Support for HPE Synergy Software Releases

Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination

For information on the most current HPE Synergy Custom SPPs supported by this HPE Synergy Management combination, see the Important tab.

HPE Synergy Custom SPP 2019.12.20200125 - January 2020

HPE Synergy Custom SPP 2019.12.20200125 is built on HPE Synergy Custom SPP 2019.12.20191219, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.12.20200124 - January 2020

HPE Synergy Custom SPP 2019.12.20200124 is built on HPE Synergy Custom SPP 2019.12.20191219, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20200123 - January 2020

HPE Synergy Custom SPP 2019.03.20200123 is built on HPE Synergy Custom SPP 2019.03.20191029, based on the core Service Pack for ProLiant (SPP) Version 2019.03.0, and provides the fixes for HPE Synergy firmware components.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.12.20191219 - December 2019

HPE Synergy Custom SPP 2019.12.20191219 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

IMPORTANT:

This HPE Synergy Custom SPP contains HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

HPE Synergy Custom SPP 2019.03.20191029 - October 2019

HPE Synergy Custom SPP 2019.03.20191029 is built on HPE Synergy Custom SPP 2019.03.20190825 and provides fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20191029 is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.09.20190926 - Sept 2019

HPE Synergy Custom SPP 2019.09.20190926 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.09.20190925 - Sept 2019

HPE Synergy Custom SPP 2019.09.20190926 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190826 - Aug 2019

HPE Synergy Custom SPP 2019.03.20190826 is built on HPE Synergy Custom SPP 2019.03.20190718 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190825 - Aug 2019

HPE Synergy Custom SPP 2019.03.20190825 is built on HPE Synergy Custom SPP 2019.03.20190718 and provides fixes for HPE Synergy firmware components. HPE Synergy Custom SPP 2019.03.20190825 is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190718 - July 2019

HPE Synergy Custom SPP 2019.03.20190718 is built on HPE Synergy Custom SPP 2019.03.20190612 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190612 - June 2019

HPE Synergy Custom SPP 2019.03.20190612 is built on HPE Synergy Custom SPP 2019.03.20190514 and provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190514 - May 2019

HPE Synergy Custom SPP 2019.03.20190514 - May 2019 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2019.03.20190401 - Apr 2019

HPE Synergy Custom SPP 2019.03.20190401 - Apr 2019 provides the latest enhancements for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2019.03.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20190405 - Feb 2019 (HPE Synergy Custom SPP 2018.11.20190205)

NOTE:

HPE Synergy Custom SPP 2018.11.20190405 replaces HPE Synergy Custom SPP 2018.11.20190205.

HPE Synergy Custom SPP 2018.11.20190405 is based on the 2018.11.0 core Service Pack for ProLiant (SPP).

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the enhancements for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides fixes for HPE Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the HPE Synergy Firmware Comparison Tool.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

HPE Synergy Composer 5.00.02

For a complete list of fixes, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controllers, HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy, Gen9 and Gen10 System ROMs, and other fixes. Additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.09.0 Release Notes.

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.12.0 Release Notes.

System ROM updates

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on the latest available System ROMs, see the Hewlett Packard Enterprise Support Center.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs

Important

HPE Synergy Composer 5.00.02

IMPORTANT:

Upgrading to HPE OneView version 5.0 (or later) from version 4.10.x will fail if the HPE Synergy 12000 Frame contains HPE Synergy 12Gb SAS Connection Modules with a firmware version prior to 1.5.x.x, and the Check for expiration of leaf certificates option is enabled in HPE OneView (Settings > Security screen).

See Customer Advisory a00093866 and the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy.

IMPORTANT:

HPE Synergy Custom SPPs based on 2019.12.0 contain HPE iLO 5 version 2.11.

To update to HPE iLO 5 version 2.10 or later, you must have a minimum HPE iLO 5 version of 1.40. Otherwise, using this HPE Synergy Custom SPP to apply a server profile will display the following error:

Unable to update server firmware due to internal error.

To avoid this error, you can manually update the HPE iLO 5 version to 1.40 or later, or update HPE OneView to 5.00.01 or later. See Customer Advisory a00094676 for additional details.

NOTE:

Due to the additional time required to upgrade the HPE Synergy Composers for this release, it is permissible to defer updating HPE Synergy Image Streamer to a separate appliance maintenance window.

For a complete list of fixes and enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes and enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions.

To view specific VMware support information for HPE Synergy, see the VMware OS Support Tool for HPE Synergy on the HPE Synergy Software Release Information site.

Supported HPE Synergy Custom SPPs

The following HPE Synergy Custom SPPs are supported with this HPE Synergy Management combination.

For additional supported HPE Synergy Custom SPPs, see "Additional HPE Synergy Custom SPPs supported by this HPE Synergy Management combination" in the Release Notes tab.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 is built on HPE Synergy Custom SPP 2019.03.20200123, based on the core Service Pack for ProLiant (SPP) Version 2019.03.1, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.03.20200324 includes firmware/driver updates for:

Operating System support

The following operating systems are supported:

  • Microsoft Windows Server 2019 - All Editions

  • Microsoft Windows Server 2016 - All Editions

  • Microsoft Windows Server 2012 R2 - All Editions

  • Microsoft Windows Server 2012 All Editions (not supported on Gen10 platforms)

  • Microsoft Windows Server 2012 All Essentials (not supported on Gen10 platforms)

  • Red Hat Enterprise Linux 7.6, 7.5

  • SUSE Linux Enterprise Server 15 (Initial)

  • SUSE Linux Enterprise Server 12 SP4, 12 SP3

  • VMware ESXi 6.0 U3

  • VMware ESXi 6.5 U2, U3

  • VMware ESXi 6.7 U2, U3

    (for specific HPE ESXi image support see VMware support with HPE Synergy Custom SPPs)

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 is built on HPE Synergy Custom SPP 2019.09.20190926, based on the core Service Pack for ProLiant (SPP) Version 2019.09.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.09.20200325 includes firmware/driver updates for:

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 is built on HPE Synergy Custom SPP 2019.12.20200125, based on the core Service Pack for ProLiant (SPP) Version 2019.12.0, and provides the latest fixes for HPE Synergy firmware components.

HPE Synergy Custom SPP 2019.12.20200326 includes firmware/driver updates for:

Revision History

Version:Comp5.00.02-ImgStmr5.00.01 (27 Feb 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

HPE Synergy Composer 5.00.02

For a complete list of fixes, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of fixes, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324 - March 2020

HPE Synergy Custom SPP 2019.03.20200324 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controllers, HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy, Gen9 and Gen10 System ROMs, and other fixes. Additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.03.1.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

HPE Synergy Custom SPP 2019.09.20200325 - March 2020

HPE Synergy Custom SPP 2019.09.20200325 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.09.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.09.0 Release Notes.

HPE Synergy Custom SPP 2019.12.20200326 - March 2020

HPE Synergy Custom SPP 2019.12.20200326 provides the latest fixes for HPE Synergy firmware components. It contains firmware updates for HPE Gen10 Smart Array Controller, Gen10 and Gen9 System ROM, and other fixes additionally, it includes vSAN certified firmware for HPE Gen9 Smart Array controllers. For more information, see the Release Notes tab.

This HPE Synergy Custom SPP is based on the core Service Pack for ProLiant (SPP) Version 2019.12.0.

For more information, see the HPE Service Pack for ProLiant (SPP) Version 2019.12.0 Release Notes.

System ROM updates

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on the latest available System ROMs, see the Hewlett Packard Enterprise Support Center.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

HPE Synergy documentation

Reference HPE OneView for HPE Synergy Firmware and Driver Update Guide.

http://www.hpe.com/info/synergy-docs

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 5.00.02 and HPE Synergy Image Streamer 5.00.01.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 5.00.02

HPE Synergy Composer 5.00.02 adds the following enhancements:

  • HPE Synergy integration with Cisco ACI

  • HPE Synergy static IP Addressing

  • IGMP Multicast enhancements

For a complete list of enhancements, see the HPE OneView 5.0 and 5.00.00.02 Release Notes for HPE Synergy and the HPE OneView 5.00.02 Update Release Notes.

HPE Synergy Image Streamer 5.00.01

For a complete list of enhancements, see the HPE Synergy Image Streamer 5.0 Release Notes and the HPE Synergy Image Streamer 5.00.01 Update Release Notes.

HPE Synergy Custom SPP 2019.03.20200324

HPE Synergy Custom SPP 2019.03.20200324 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.09.20200325

HPE Synergy Custom SPP 2019.09.20200325 offers no new enhancements.

For a list of fixes, see the Fixes tab.

HPE Synergy Custom SPP 2019.12.20200326

HPE Synergy Custom SPP 2019.12.20200326 offers no new enhancements.

For a list of fixes, see the Fixes tab.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.