Printable version

Drivers & software

Online ROM Flash Component for Windows - ST31000340NS drive

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Storage Disk
Version: SN06(4 Sep 2009)
Operating System(s): Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
File name: cp011338.exe (2.8 MB)
This Smart Component provides firmware for the following drive model: ST31000340NS (1TB 3G 7.2K 3.5-inch SATA). This Smart Component is capable of updating all instances of this drive model when attached to the following configurations: HP StorageWorks 2000 Modular Smart Array Family System.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

7b45efc31348002015e3f96fb894d925 cp011338.exe

Installation:

This is a self extracting executable module.  One can execute this module via the command line console or from Windows graphical user interface.

Via GUI

You will be required to enter the MSA2000 SMU credentials in the second dialog window.
You will need to enter the MSA2000 SMU IP address,  a username with manage access rights and the password of this user account.

Via CLI

The following syntax can be used to invoke at the command line:

cpxxxxxxx.exe /target <MSA2000_IP> /user <USER_NAME> /passwd <PASSWORD> /s

where:

MSA2000_IP is the management IP address of the MSA2000 controller
USER_NAME is the username account with manage rights on the MSA2000 controller
PASSWORD is the password for username on the MSA2000 controller

Instead of command line parameters you can use the following DOS environment variables:

OA_ADDRESS: set this variable for the IP address of MSA2000 controller
OA_USERNAME : set this variable for the username of MSA2000 controller
OA_PASSWORD : set this variable for the password of MSA2000 controller


End User License Agreements:
Hewlett-Packard End User License Agreement


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.

 


Notes:

NOTE: For a complete listing of known issues and workarounds, see the Release Notes located at ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1663552478/v55559/579165-001.htm

Failure Considerations:

  1. Single ported drive will not be flashed if the owner controller of that drive is not accessible through  network
  2. Drives will not be flashed if the drive is in a virtual disk which is being initialized, expanded, reconstructed, verified, or scrubbed.
  3. Flash operation on any pending disks will be aborted if the currently flashed drive is in LEFTOVR state or the virtual disk containing this disk is found to be in offline or critical state. If this does occur, the vdisk can be restored to online status by changing the drive status from leftover to available and then adding the drive to the vdisk as a spare. If a global spare drive was available, it will have been used to restore the vdisk to online status.

Supported Devices and Features:

MSA2312fc, MSA2324fc, MSA2312sa, MSA2324sa, MSA2312i, MSA2324i, MSA2012fc, MSA2212fc, MSA2012i, MSA2012sa


The HP SATA hard drive models with firmware versions prior to SN06, may experience erroneous drive failure indications. When this occurs, the drive will display a solid amber LED, but upon a hot-plug removal and re-seat or server reboot, the drive will function normally. Erroneous failures may occur when the disk drives appear to be idle or when on-line and active.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.

 

Version:SN06 (4 Sep 2009)
Fixes
The HP SATA hard drive models with firmware versions prior to SN06, may experience erroneous drive failure indications. When this occurs, the drive will display a solid amber LED, but upon a hot-plug removal and re-seat or server reboot, the drive will function normally. Erroneous failures may occur when the disk drives appear to be idle or when on-line and active.

Type: Firmware - Storage Disk
Version: SN06(4 Sep 2009)
Operating System(s):
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64

Description

This Smart Component provides firmware for the following drive model: ST31000340NS (1TB 3G 7.2K 3.5-inch SATA). This Smart Component is capable of updating all instances of this drive model when attached to the following configurations: HP StorageWorks 2000 Modular Smart Array Family System.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

7b45efc31348002015e3f96fb894d925 cp011338.exe

Installation:

This is a self extracting executable module.  One can execute this module via the command line console or from Windows graphical user interface.

Via GUI

You will be required to enter the MSA2000 SMU credentials in the second dialog window.
You will need to enter the MSA2000 SMU IP address,  a username with manage access rights and the password of this user account.

Via CLI

The following syntax can be used to invoke at the command line:

cpxxxxxxx.exe /target <MSA2000_IP> /user <USER_NAME> /passwd <PASSWORD> /s

where:

MSA2000_IP is the management IP address of the MSA2000 controller
USER_NAME is the username account with manage rights on the MSA2000 controller
PASSWORD is the password for username on the MSA2000 controller

Instead of command line parameters you can use the following DOS environment variables:

OA_ADDRESS: set this variable for the IP address of MSA2000 controller
OA_USERNAME : set this variable for the username of MSA2000 controller
OA_PASSWORD : set this variable for the password of MSA2000 controller


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.

 


Notes:

NOTE: For a complete listing of known issues and workarounds, see the Release Notes located at ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1663552478/v55559/579165-001.htm

Failure Considerations:

  1. Single ported drive will not be flashed if the owner controller of that drive is not accessible through  network
  2. Drives will not be flashed if the drive is in a virtual disk which is being initialized, expanded, reconstructed, verified, or scrubbed.
  3. Flash operation on any pending disks will be aborted if the currently flashed drive is in LEFTOVR state or the virtual disk containing this disk is found to be in offline or critical state. If this does occur, the vdisk can be restored to online status by changing the drive status from leftover to available and then adding the drive to the vdisk as a spare. If a global spare drive was available, it will have been used to restore the vdisk to online status.

Supported Devices and Features:

MSA2312fc, MSA2324fc, MSA2312sa, MSA2324sa, MSA2312i, MSA2324i, MSA2012fc, MSA2212fc, MSA2012i, MSA2012sa


Fixes

The HP SATA hard drive models with firmware versions prior to SN06, may experience erroneous drive failure indications. When this occurs, the drive will display a solid amber LED, but upon a hot-plug removal and re-seat or server reboot, the drive will function normally. Erroneous failures may occur when the disk drives appear to be idle or when on-line and active.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP StorageWorks 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA2000 configurations.

 

Revision History

Version:SN06 (4 Sep 2009)
Fixes
The HP SATA hard drive models with firmware versions prior to SN06, may experience erroneous drive failure indications. When this occurs, the drive will display a solid amber LED, but upon a hot-plug removal and re-seat or server reboot, the drive will function normally. Erroneous failures may occur when the disk drives appear to be idle or when on-line and active.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.