Printable version

Drivers & software

* RECOMMENDED * Online Power Supply Flash Component for Windows - HPE Flexible Slot Power Supplies

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Power Management
Version: 2020.08.03(4 Sep 2020)
Operating System(s): Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Multi-part download
File name: cp045100.compsig (2.0 KB)
File name: cp045100.exe (683 KB)
This component provides updated Flexible Slot Power Supply firmware that can be installed directly on supported Operating Systems.

Prerequisites:

iLO 5 Channel Interface Driver for Windows Version 4.0.0.0


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

535372017c8df5127b26503567c4234a6632f9f9a3da2fb38440097dfad0c28f cp045100.exe
fa35135861753c9ab9dbcbefe6fcdf579e251e5eaf7448ef3e5f6eb2bdbc3565 cp045100.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To install the Smart Component, complete the following steps:

  1. Place the Smart Component in a temporary directory.
  2. Double-click on the Smart Component.
  3. Follow the directions given by the Smart Component.
  4. For systems with a single supply, reboot your system if you would like the update to take effect immediately.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
HPE Power Supply Firmware

Release Version and/or Date: 
     2020.08.03


Last Recommended or Critical Version:
     2020.08.03

 

Previous Version of Firmware:
      1.04 (or earlier)

 

Firmware Dependency:
     None

 

Enhancements/New Features:
  None

 

Problems Fixed: 

Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware. 

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Known Issues:
    None

 


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

  • Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Version:2020.08.03 (4 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

  • Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.


Version:2020.06.03 (12 Jun 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware included in the 2020.06.03 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Version:2018.06.13 (27 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.02 firmware included in the 2018.06.13 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.01 (and earlier) power supply firmware.

Enhancements

None


Type: Firmware - Power Management
Version: 2020.08.03(4 Sep 2020)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

This component provides updated Flexible Slot Power Supply firmware that can be installed directly on supported Operating Systems.

Installation Instructions

Prerequisites:

iLO 5 Channel Interface Driver for Windows Version 4.0.0.0


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

535372017c8df5127b26503567c4234a6632f9f9a3da2fb38440097dfad0c28f cp045100.exe
fa35135861753c9ab9dbcbefe6fcdf579e251e5eaf7448ef3e5f6eb2bdbc3565 cp045100.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To install the Smart Component, complete the following steps:

  1. Place the Smart Component in a temporary directory.
  2. Double-click on the Smart Component.
  3. Follow the directions given by the Smart Component.
  4. For systems with a single supply, reboot your system if you would like the update to take effect immediately.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
HPE Power Supply Firmware

Release Version and/or Date: 
     2020.08.03


Last Recommended or Critical Version:
     2020.08.03

 

Previous Version of Firmware:
      1.04 (or earlier)

 

Firmware Dependency:
     None

 

Enhancements/New Features:
  None

 

Problems Fixed: 

Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware. 

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Known Issues:
    None

 


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

  • Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Revision History

Version:2020.08.03 (4 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

  • Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.


Version:2020.06.03 (12 Jun 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Version 1.05 firmware included in the 2020.06.03 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Version:2018.06.13 (27 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.02 firmware included in the 2018.06.13 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.01 (and earlier) power supply firmware.

Enhancements

None


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.