Printable version

Drivers & software

Firmware Flash Component for Windows - HP MSA 1040/2040, P2000 G3 and MSA2000 72GB, 146GB 15K SAS 6G SFF Hard Drive (EH0072FARUA, EH0146FARUB)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPD9(21 May 2014)
Operating System(s):
Microsoft Windows Server 2008 Itanium | View all
File name: cp023171.exe (2.5 MB)
This Windows Smart Component contains a firmware update for the hard drive models EH0072FARUA (72GB 15K 6G SAS) and EH0146FARUB (146GB 15K 6G SAS) in HP MSA 1040/2040, P2000 G3 and MSA2000 configurations.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

731433ccfe50e002d664123b3f60a6f0 cp023171.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 1040/2040, P2000 G3 or MSA2000 array controller enclosure.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This firmware update resolves the below issue:

  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.

Version:HPD9 (21 May 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This firmware update resolves the below issue:

  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

Version:HPD8 (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

  • Firmware version HPD8 now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

Version:HPD7 (17 Aug 2011)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Version:HPD3 (21 Jul 2010)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Type: Firmware - SAS Storage Disk
Version: HPD9(21 May 2014)
Operating System(s):
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2

Description

This Windows Smart Component contains a firmware update for the hard drive models EH0072FARUA (72GB 15K 6G SAS) and EH0146FARUB (146GB 15K 6G SAS) in HP MSA 1040/2040, P2000 G3 and MSA2000 configurations.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

731433ccfe50e002d664123b3f60a6f0 cp023171.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 1040/2040, P2000 G3 or MSA2000 array controller enclosure.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This firmware update resolves the below issue:

  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 storage system.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array reference guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 storage arrays.

Revision History

Version:HPD9 (21 May 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This firmware update resolves the below issue:

  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

Version:HPD8 (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

  • Firmware version HPD8 now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

Version:HPD7 (17 Aug 2011)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Version:HPD3 (21 Jul 2010)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.