Printable version

Drivers & software

Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB, 450GB, 600GB SAS 6G SFF Hard Drive (EG0300FBDSP, EG0450FBDSQ, EG0600FBDSR)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPD6(14 Nov 2013)
Operating System(s):
Microsoft Windows Server 2003 | View all
File name: cp020788.exe (2.6 MB)
This Windows Smart Component contains a firmware update for the hard drive models EG0300FBDSP (300GB 10K 6G SAS), EG0450FBDSQ (450GB 10K 6G SAS) and EG0600FBDSR (600GB 10K 6G SAS) in HP MSA 2040, P2000 G3 and MSA2000 G2 configurations.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

829183c97263de915b64656a149ebbb0 cp020788.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.


Notes:

Deliverable Name:
      Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB, 450GB, 600GB  SAS 6G SFF Hard Drive (EG0300FBDSP, EG0450FBDSQ, EG0600FBDSR)

Release Version and/or Date:
      HPD6

Previous Version of Firmware:
      HPD4

Enhancements/New Features:
    None

Known Issues:
     None


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 2040 or P2000 G3 or MSA2000 G2 array controller enclosure.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. 
  • This firmware improves signal quality between the drive and the controller.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.

Version:HPD6 (14 Nov 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. 
  • This firmware improves signal quality between the drive and the controller.

Version:HPD4 (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

  • Firmware version HPD4 corrects the maximum temperature reported for the hard drives recommended operating temperatures. Improperly reported values might cause ProLiant system fans to operate at incorrect speeds.

Version:HPD2 (14 Sep 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


No functional changes.  Change is related to manufacturing process only.


Type: Firmware - SAS Storage Disk
Version: HPD6(14 Nov 2013)
Operating System(s):
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2

Description

This Windows Smart Component contains a firmware update for the hard drive models EG0300FBDSP (300GB 10K 6G SAS), EG0450FBDSQ (450GB 10K 6G SAS) and EG0600FBDSR (600GB 10K 6G SAS) in HP MSA 2040, P2000 G3 and MSA2000 G2 configurations.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

829183c97263de915b64656a149ebbb0 cp020788.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.


Notes:

Deliverable Name:
      Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB, 450GB, 600GB  SAS 6G SFF Hard Drive (EG0300FBDSP, EG0450FBDSQ, EG0600FBDSR)

Release Version and/or Date:
      HPD6

Previous Version of Firmware:
      HPD4

Enhancements/New Features:
    None

Known Issues:
     None


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 2040 or P2000 G3 or MSA2000 G2 array controller enclosure.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. 
  • This firmware improves signal quality between the drive and the controller.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040/P2000/MSA2000 configurations.

Revision History

Version:HPD6 (14 Nov 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to particular port/slot during system boot up. 
  • This firmware improves signal quality between the drive and the controller.

Version:HPD4 (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

  • Firmware version HPD4 corrects the maximum temperature reported for the hard drives recommended operating temperatures. Improperly reported values might cause ProLiant system fans to operate at incorrect speeds.

Version:HPD2 (14 Sep 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


No functional changes.  Change is related to manufacturing process only.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.