Printable version

Drivers & software

** CRITICAL ** Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 146GB,300GB SAS SFF Hard Drive (DG0146FARVU/EG0146FAWJC, DG0300FARVV/EG0300FAWJD, DG0146BAMYQ and DG0300BAMYR)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPDG(24 Oct 2013)
Operating System(s):
Microsoft Windows Server 2003 | View all
File name: cp020903.exe (2.7 MB)
This Windows Smart Component contains a firmware update for the hard drive models DG0146FARVU(146GB 10K SAS), DG0146BAMYQ(146GB 10K SAS), EG0146FAWJC(146GB 10K SAS), DG0300FARVV(300GB 10K SAS), DG0300BAMYR(300GB 10K SAS) and EG0300FAWJD (300GB 10K SAS) in HP MSA 2040, P2000 G3 MSA and MSA2000 G2 configurations.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

d441c2451eb23c2950bfd62cf34280f8 cp020903.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Critical - HP requires users update to this version immediately.

Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please review the Failure considerations below before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

Notes:

Deliverable Name:
      Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 146GB,300GB SAS SFF Hard Drive (DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD)

Release Version and/or Date:
      HPDG

Enhancements/New Features:
     None

Known Issues:
     None
 

Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any MSA 2040 or P2000 G3 or MSA2000 G2 array controller enclosure.

Upgrade Requirement:
Critical - HP requires users update to this version immediately.

Problems Fixed:

This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests.  This data issue has been duplicated in laboratory firmware stress tests.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please review the Failure considerations below before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

Version:HPDG (A) (15 Aug 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Upgrade to HDD firmware HPDG(A) is not necessary if the firmware is currently running HPDG firmware.

The following issue was fixed in HPDG:

  • This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
Enhancements

In this version the Smart Component was updated to support MSA 1040 arrays.

Version:HPDG (24 Oct 2013)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.

Problems Fixed:

This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests.  This data issue has been duplicated in laboratory firmware stress tests.

Version:HPDC (29 Nov 2011)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

This firmware prevents the following:

  • Possible HDD hang when the drive is used in a dual domain or dual path fail-over environment and communication to one path is suddenly lost
  • Over-writing data written via the fail over port when data is written via a port performing interface recovery (discovery) 
  • A situation where the drive reports self test in progress erroneously after self test was interrupted by a power cycle or hot plug

Version:HPD8 (15 Sep 2011)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Decreases the number of command timeouts caused by error recovery by improving drive background data checking algorithms, particularly in high usage environments.


Version:HPD6 (18 Oct 2010)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

  • Corrects a data transfer issue during write cache enabled operations.
  • Extends watchdog timers to resolve possible dropped data frames.

    • Version:HPD5 (21 Jul 2010)
    Enhancements

    Upgrade Requirement:
    Recommended - HPE recommends users update to this version at their earliest convenience.

    Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


    Type: Firmware - SAS Storage Disk
    Version: HPDG(24 Oct 2013)
    Operating System(s):
    Microsoft Windows Server 2003
    Microsoft Windows Server 2003 64-Bit Edition
    Microsoft Windows Server 2003 for 64-bit Extended Systems
    Microsoft Windows Server 2008 Itanium
    Microsoft Windows Server 2008 R2
    Microsoft Windows Server 2008 R2 for Itanium-Based Systems
    Microsoft Windows Server 2008 W32
    Microsoft Windows Server 2008 x64
    Microsoft Windows Server 2012

    Description

    This Windows Smart Component contains a firmware update for the hard drive models DG0146FARVU(146GB 10K SAS), DG0146BAMYQ(146GB 10K SAS), EG0146FAWJC(146GB 10K SAS), DG0300FARVV(300GB 10K SAS), DG0300BAMYR(300GB 10K SAS) and EG0300FAWJD (300GB 10K SAS) in HP MSA 2040, P2000 G3 MSA and MSA2000 G2 configurations.

    Installation Instructions

    Prerequisites:

    CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

    IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

    NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

    IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

    To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

    d441c2451eb23c2950bfd62cf34280f8 cp020903.exe

    Reboot Requirement:
    Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

    Installation:

    The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

    GUI option

    1. Place the downloaded firmware package in a temporary directory.

    2. Using Windows Explorer, navigate to the directory containing the download.

    3. Double click the executable file.

    4. Follow onscreen instructions.


    CLI option

    Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

    where:

    • ip_address is the management IP address of the array controller

    • username is the username account with management rights

    • password is the password for username

    Instead of command line parameters you can use the following DOS environment variables:

    • oa_address: set this variable for the IP address of array controller

    • oa_username : set this variable for the username of array controller

    • oa_password : set this variable for the password of array controller

    Release Notes

    End User License Agreements:
    Hewlett-Packard End User License Agreement

    Upgrade Requirement:
    Critical - HP requires users update to this version immediately.

    Important:

    CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

    IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

    NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

    IMPORTANT: Please review the Failure considerations below before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

    Notes:

    Deliverable Name:
          Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 146GB,300GB SAS SFF Hard Drive (DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD)

    Release Version and/or Date:
          HPDG

    Enhancements/New Features:
         None

    Known Issues:
         None
     

    Supported Devices and Features:
    Firmware on the listed drives can be updated when attached to any MSA 2040 or P2000 G3 or MSA2000 G2 array controller enclosure.

    Fixes

    Upgrade Requirement:
    Critical - HP requires users update to this version immediately.

    Problems Fixed:

    This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests.  This data issue has been duplicated in laboratory firmware stress tests.

    Important

    CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

    IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

    NOTE: Disk drive upgrades on the HP MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

    IMPORTANT: Please review the Failure considerations below before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

    Revision History

    Version:HPDG (A) (15 Aug 2014)
    Fixes

    Upgrade Requirement:
    Recommended - HP recommends users update to this version at their earliest convenience.

    Upgrade to HDD firmware HPDG(A) is not necessary if the firmware is currently running HPDG firmware.

    The following issue was fixed in HPDG:

    • This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    Enhancements

    In this version the Smart Component was updated to support MSA 1040 arrays.

    Version:HPDG (24 Oct 2013)
    Fixes

    Upgrade Requirement:
    Critical - HP requires users update to this version immediately.

    Problems Fixed:

    This firmware corrects a possible condition in which stale data might be written to the disk.  This results in unexpected data being returned in subsequent requests.  This data issue has been duplicated in laboratory firmware stress tests.

    Version:HPDC (29 Nov 2011)
    Fixes

    Upgrade Requirement:
    Recommended - HP recommends users update to this version at their earliest convenience.

    This firmware prevents the following:

    • Possible HDD hang when the drive is used in a dual domain or dual path fail-over environment and communication to one path is suddenly lost
    • Over-writing data written via the fail over port when data is written via a port performing interface recovery (discovery) 
    • A situation where the drive reports self test in progress erroneously after self test was interrupted by a power cycle or hot plug

    Version:HPD8 (15 Sep 2011)
    Enhancements

    Upgrade Requirement:
    Recommended - HP recommends users update to this version at their earliest convenience.

    Decreases the number of command timeouts caused by error recovery by improving drive background data checking algorithms, particularly in high usage environments.


    Version:HPD6 (18 Oct 2010)
    Fixes

    Upgrade Requirement:
    Recommended - HP recommends users update to this version at their earliest convenience.

  • Corrects a data transfer issue during write cache enabled operations.
  • Extends watchdog timers to resolve possible dropped data frames.

    • Version:HPD5 (21 Jul 2010)
    Enhancements

    Upgrade Requirement:
    Recommended - HPE recommends users update to this version at their earliest convenience.

    Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


    Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.