Printable version

Drivers & software

* RECOMMENDED * System ROMPaq Firmware Upgrade for HP ProLiant ML150 G6 Servers (For USB Key-Media)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: BIOS (Entitlement Required) - System ROM
Version: 2011.01.18 (B)(4 Nov 2014)
Operating System(s):
Microsoft Windows Server 2003 | View all
File name: SP68166.exe (4.2 MB)
This release provides updated system ROM images for the latest maintenance releases of HP ProLiant ML150 G6 Servers.

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

d9561eb898e48bceb08161cbe13eec1c SP68166.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1. Obtain a formatted USB Key media.

2. Download the SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows Server 2003, Microsoft Windows Server 2008, or Microsoft Windows Server 2008 R2 and change to that directory.

3. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx.exe file and follow the installation wizard to complete the SoftPaq installation process. At the end of a successful installation of the SoftPaq a web page will automatically appear to provide you with the different methods for restoring and/or upgrading the firmware on the system.

4. After the USB Key is created, you may delete the downloaded file if you wish.

5. Insert this USB Key into the USB Key port of the system to be updated and power the system on to boot to the USB Key.


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Deliverable Name:

HP ProLiant ML150 G6 System ROM - O21 

Release Date:

01/18/2011 

Last Recommended or Critical Revision:

01/18/2011 

Previous Revision:

07/06/2009 

Firmware Dependencies:

BMC FW 4.21.

Enhancements/New Features:

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Firmware Dependencies:

BMC FW 4.21.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None

Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Deliverable Name:

HP ProLiant ML150 G6 System ROM - O21 

Release Date:

01/18/2011 

Last Recommended or Critical Revision:

01/18/2011 

Previous Revision:

07/06/2009 

Firmware Dependencies:

BMC FW 4.21.

Enhancements/New Features:

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None
Version:2011.01.18 (B) (4 Nov 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Firmware Dependencies:

BMC FW 4.21.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None
Enhancements

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.


Version:2009.07.06(A) (18 Aug 2009)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue where incomplete processor information or incorrect proccessor location was displayed in the System Management homepage and HP Systems Insight Manager.

Resolved an issue where the WLK 1.4 WHEAHCT test fails under Microsoft Windows 2008 R2 OS.

Resolved an issue where the system did not halt during POST and display a warning message if only one processor is installed in the system in Processor socket 2.

Resolved an issue where "unknown memory type" was displayed in the System Management Homepage.

Resolved an issue where an inaccurate CPU low temperature is displayed in the IPMI page in the BIOS Setup utility and Lights-Out 100 management page.

Resolved an issue where the system fans would not run at high speed, after a redundant fan failure, with 750W redundant power supplies installed in the system.

Resolved an issue where an "unknown system event log" is displayed in the IPMI page in the BIOS Setup utility after an I/O Hub (IOH) error occurs.

Resolved an issue where the CPU VCCP/VTT 1.1 voltage reading is incorrect on the Lights-Out 100 management page.

Resolved an issue where fan 1 is not displayed in the Lights-Out 100 management page when only Processor 1 is installed in a system with non redundant fans and a 460W power supply.

Resolved an issue where the system fails to enable fan blowout whenever the system shutdowns due to thermal overtemperature.

Removed SATA legacy mode support.

Enhancements

Added support for detecting mismatched redundant power supplies. POST will display the message "Power Supply Mismatch Error - System Halted" and HALT the system if two mismatched power supplies are installed.

Added support for the latest Intel processors.

Updated the memory reference code to latest version from Intel.

Updated the embedded SW Raid Option ROM to version 1.10.


Version:2009.04.01 (A) (14 Apr 2009)
Fixes
Resolved an issue where the health driver fails to load on a system with redundant fan support when initializing a Linux Operating System.

Resolved an issue where the HP-SNMP agent service via command line fails to start on a system with redundant fan support under a Linux Operating system.

Resolved an issue where processor and memory information is not available in the HP System Management Homepage on a system with redundant fan support under a Microsoft Windows Operating System.

Resolved an issue where the system temperature is not detected in the HP System Management Homepage on a system with redundant fan support under a Microsoft Windows Operating System.

Resolved an issue where redundant power supply status is not detected in the HP System Management Homepage on a system with redundant 750 watt power supplies installed under a Microsoft Windows Operating System.

Resolved an issue where the system fan speed is incorrect in the HP System Management Homepage whenever a fan failure occurs on a system with non-redundant fans under a Microsoft Windows Operating System.


Version:2009.03.19 (A) (14 Apr 2009)
Enhancements
Initial release.

Type: BIOS (Entitlement Required) - System ROM
Version: 2011.01.18 (B)(4 Nov 2014)
Operating System(s):
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
VMware ESX/ESXi 4.0
VMware ESX/ESXi 4.1

Description

This release provides updated system ROM images for the latest maintenance releases of HP ProLiant ML150 G6 Servers.

Enhancements

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

d9561eb898e48bceb08161cbe13eec1c SP68166.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1. Obtain a formatted USB Key media.

2. Download the SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows Server 2003, Microsoft Windows Server 2008, or Microsoft Windows Server 2008 R2 and change to that directory.

3. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx.exe file and follow the installation wizard to complete the SoftPaq installation process. At the end of a successful installation of the SoftPaq a web page will automatically appear to provide you with the different methods for restoring and/or upgrading the firmware on the system.

4. After the USB Key is created, you may delete the downloaded file if you wish.

5. Insert this USB Key into the USB Key port of the system to be updated and power the system on to boot to the USB Key.


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Deliverable Name:

HP ProLiant ML150 G6 System ROM - O21 

Release Date:

01/18/2011 

Last Recommended or Critical Revision:

01/18/2011 

Previous Revision:

07/06/2009 

Firmware Dependencies:

BMC FW 4.21.

Enhancements/New Features:

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None

Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Firmware Dependencies:

BMC FW 4.21.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None

Important

Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Deliverable Name:

HP ProLiant ML150 G6 System ROM - O21 

Release Date:

01/18/2011 

Last Recommended or Critical Revision:

01/18/2011 

Previous Revision:

07/06/2009 

Firmware Dependencies:

BMC FW 4.21.

Enhancements/New Features:

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None

Revision History

Version:2011.01.18 (B) (4 Nov 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2011.01.18 (B) has been signed with the new digital signature and replaces version 2011.01.18(A). The actual firmware contained within version 2011.01.18 (B) did not change as compared to version 2011.01.18(A) and therefore it is not necessary to upgrade if version 2011.01.18(A) has already been installed.

Firmware Dependencies:

BMC FW 4.21.

Problems Fixed:

Resolved an issue where system hangs on PXE boot from embedded NIC whenever B110i RAID is enabled in the BIOS Setup Menu.

Resolved an issue where the incorrect memory size is reported in SMBIOS record type 17 when memory is installed in DIMM socket 3E.

Resolved an issue where CPU 2 DIMM temperature was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 460W power supply installed.

Resolved an issue where the speed for fan 4 was missing in the IPMI hardware health information page in the ROM-Based Setup Menu with a non-redundant fan configuration and a 750W power supply installed.

Resolved an issue where the wrong hard disk size is displayed in AHCI Port 1 in the ROM-Based Setup Menu whenever the SATA controller is configured for AHCI mode.

Resolved an issue where the system will hang in POST and beep continuously when a HP T1500 G3 UPS is installed.

Resolved an issue when two 750 watt power supplies are installed and power supply number two is removed the status for power supply number two will be incorrect in the Lights-Out 100 management page.

Resolved an issue where the system fails to shutdown when one fan fails in a non-redundant fan configuration under a Microsoft Windows operating system.

Resolved an issue where the Platform Event Filtering (PEF) setting will be reset to disabled after a system reboot with the health driver loaded.

Resolved an issue where the red health LED does not illuminate when an uncorrectable memory error occurs.

Updated Smart Array B110i SATA RAID firmware to version 1.20. This version resolves an installation issue with Windows 2003 Enterprise Edition x64, which would result in the message "Error loading operating system" after the first reboot.

Known Issues:

None
Enhancements

Enhanced the BMC recovery jumper feature by forcing the BMC to remain in boot mode when the jumper is active. The system ROM will ignore fan, power supply, and thermal checks during POST to allow the system to boot and support flashing. In this case, the system ROM will display a POST message warning of the jumper being set and display an "F1 to Continue" prompt for the user.

Added support for latest E5502, E5504, E5506, E5520, E5530 and E5550 Intel Xeon processors.

Added support for the system to execute a controlled shutdown whenever multiple fans fail in a redundant fan configuration.

Added support for the System-Locked Preinstallation (SLP) feature available with the Microsoft Windows 2008 R2 operating system.


Version:2009.07.06(A) (18 Aug 2009)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue where incomplete processor information or incorrect proccessor location was displayed in the System Management homepage and HP Systems Insight Manager.

Resolved an issue where the WLK 1.4 WHEAHCT test fails under Microsoft Windows 2008 R2 OS.

Resolved an issue where the system did not halt during POST and display a warning message if only one processor is installed in the system in Processor socket 2.

Resolved an issue where "unknown memory type" was displayed in the System Management Homepage.

Resolved an issue where an inaccurate CPU low temperature is displayed in the IPMI page in the BIOS Setup utility and Lights-Out 100 management page.

Resolved an issue where the system fans would not run at high speed, after a redundant fan failure, with 750W redundant power supplies installed in the system.

Resolved an issue where an "unknown system event log" is displayed in the IPMI page in the BIOS Setup utility after an I/O Hub (IOH) error occurs.

Resolved an issue where the CPU VCCP/VTT 1.1 voltage reading is incorrect on the Lights-Out 100 management page.

Resolved an issue where fan 1 is not displayed in the Lights-Out 100 management page when only Processor 1 is installed in a system with non redundant fans and a 460W power supply.

Resolved an issue where the system fails to enable fan blowout whenever the system shutdowns due to thermal overtemperature.

Removed SATA legacy mode support.

Enhancements

Added support for detecting mismatched redundant power supplies. POST will display the message "Power Supply Mismatch Error - System Halted" and HALT the system if two mismatched power supplies are installed.

Added support for the latest Intel processors.

Updated the memory reference code to latest version from Intel.

Updated the embedded SW Raid Option ROM to version 1.10.


Version:2009.04.01 (A) (14 Apr 2009)
Fixes
Resolved an issue where the health driver fails to load on a system with redundant fan support when initializing a Linux Operating System.

Resolved an issue where the HP-SNMP agent service via command line fails to start on a system with redundant fan support under a Linux Operating system.

Resolved an issue where processor and memory information is not available in the HP System Management Homepage on a system with redundant fan support under a Microsoft Windows Operating System.

Resolved an issue where the system temperature is not detected in the HP System Management Homepage on a system with redundant fan support under a Microsoft Windows Operating System.

Resolved an issue where redundant power supply status is not detected in the HP System Management Homepage on a system with redundant 750 watt power supplies installed under a Microsoft Windows Operating System.

Resolved an issue where the system fan speed is incorrect in the HP System Management Homepage whenever a fan failure occurs on a system with non-redundant fans under a Microsoft Windows Operating System.


Version:2009.03.19 (A) (14 Apr 2009)
Enhancements
Initial release.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.