Type: |
Driver - Storage Fibre Channel and Fibre Channel Over Ethernet |
Version: |
9.1.16.21(1 Apr 2016) |
Operating System(s): |
Microsoft Windows Server 2008 R2
|
Microsoft Windows Server 2008 x64
|
Microsoft Windows Storage Server 2008 R2
|
Microsoft Windows Storage Server 2008 x64 Editions
|
|
Description
This component contains version 9.1.16.21 of the QLogic Storport driver for Extended Systems which provides FC-HBA driver support for HPE Storage arrays.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:
7a911047e05c778de3764cf36d059e373b42fb0272dbeedcf25beb51ae71322c |
cp027610.exe |
Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Release Notes
End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Important:
Release Notes:
HP StorageWorks QLogic Adapters Release Notes
Supported Devices and Features:
This driver supports the following HP adapters:
- HP FC1142SR 4Gb PCIe Host Bus Adapter
- HP FC1242SR 4Gb PCIe DC Host Bus Adapter
- HP 81Q PCIe Fibre Channel Host Bus Adapter
- HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
- QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
- QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
- HP QMH2572 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
- HP QMH2672 16Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
- HP StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
- HP StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Maintenance updates made to driver including
- Added online flash update support
- Updated 4 & 8Gb FW
Important
Revision History
Version:9.2.2.20 (12 Dec 2016)
Enhancements
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Updated the driver to version 9.2.2.20
Added support for the following devices:
- HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
- HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
Version:9.1.17.25 (21 Apr 2017)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
The driver update is a workaround to address unexpected path loss behavior during Brocade switch FOS upgrades
Enhancements
Updated to driver version 9.1.17.25.
Version:9.1.17.22 (31 Mar 2016)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
This driver version resolves the following:
-
Corrected Echo Test by setting bit 15 in ECHO mailbox command
-
Corrected BBCR to return correct number of status mailbox registers
-
Changed Maximum read request size to 4K bytes
Enhancements
Updated the driver to version 9.1.17.22
Added support for the following devices:
- HPE StoreFabric SN1100Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
- HPE StoreFabric SN1100Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
- HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
- HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
Added FC FEC (FC Forward Error Control) support
Added support for IOCB based fabric priority
Version:9.1.16.21 (1 Apr 2016)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Maintenance updates made to driver including
- Added online flash update support
- Updated 4 & 8Gb FW
Version:9.1.15.21 (1 Oct 2015)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Maintenance updates to driver including:
- Fixed firmware dump not being cleared after retrieval
- Added suppport to read MPI and PEP firmware versions from primary or secondary image
Enhancements
Updated the Smart Component to Driver 9.1.15.21
Version:9.1.14.22 (15 Jun 2015)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
- Fixed receiving ELS frame path
- Fixed beaconing
Enhancements
Version:9.1.12.22 (30 Mar 2015)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
-
Fixed adapter WWPN is not getting changed once cable is pulled out from FAWWN configured port
-
Fixed path loss caused by missing PLOGI after FLOGI
-
Fixed handling CRC and Recovered Error on same exchange
-
Fixed I/O quiescence on tape device reboot
Enhancements
Updated the Smart Component to Driver 9.1.12.22
Version:9.1.11.28 (9 Sep 2014)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
-
Fixed backup issue at 256K block transfer size limit number
-
Fixed timing issue in device re-login after logout to prevent I/O quiescence during device reboot
-
Fixed poor read write performance at certain large block sizes
Enhancements
Updated the Smart Component for Driver 9.1.11.28
Version:9.1.11.20 (10 Sep 2013)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
-
Fixed Ext Loopback test fails with Loopback connector (8Gb loop mode)
-
The fwdump routine no longer terminates unexpectedly
Enhancements
-
Added support for HP QMH2672 16Gb FC HBA
-
Updated the Smart Component with driver version 9.1.11.20.
-
Removed restrictions on writing mbx8 register
-
The "Execution Throttle" field in nvram for 2600 series adapters can now be
modified
-
Added the ability to read 2600 series adapters ASIC temperature
-
Added the ability to read ASIC temperature for OEM Adapters
-
Added support for full 64 bit physical addressing
-
Added support for the QLE10000 series adapters
-
Removed support for 2Gb speed in port supported speed for 16Gb FC in 2600 series
adapters
-
External loopback supports OEM adapters when in loop mode
Version:9.1.10.27 (19 Feb 2013)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Windows FC Driver from 9.1.10.26 to 9.1.10.27:
-
Fixed event Viewer Error 154 (Disk I/O error) occurs when running Diskercise on FC LUN
Enhancements
-
Updated the Smart Component with driver version 9.1.10.27.
-
This driver loads firmware version 5.06.05.
Version:9.1.10.26 (26 Oct 2012)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
-
Updated the Smart Component with driver version 9.1.10.26.
-
This driver loads firmware version 5.06.05.
Version:3.17.0.0 (4 Jun 2012)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
-
Updated the Smart Component with signed driver version 9.1.9.49.
-
This driver loads firmware version 5.06.04.
Version:3.16.0.0 (1 Apr 2012)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Updated the Smart Component with signed version 9.1.9.45 with support for the QMH2572 8 Gb FC Mezz Card. This driver version supports changes made to the board to support power sensing.
This driver loads firmware version 5.06.50.
Version:3.15.0.0 (B) (2 Dec 2014)
Enhancements
Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
HP StorageWorks Fibre Channel Adapter Kit for the x64 QLogic Storport Driver version 3.15.0.0(B) component packaging has been updated; there is no impact to the product's functionality. If the target system has already been updated with version 3.15.0.0 then it is not necessary to update the system with 3.15.0.0(B).
This Smart Component contains driver version 9.1.9.26.
Version:3.15.0.0 (30 Mar 2012)
Fixes
Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
This driver installation with HP Smart Component requires a minimum Windows Server 2003 SP2 with KB932755. Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the minport driver. For boot installations, Windows Server 2003 SP2 install image is required followed by the KB update.
Enhancements
Updated driver to version 9.1.9.26
Version:3.14.0.0 (12 Apr 2011)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This driver installation with HP Smart Component requires a minimum Windows Server 2003 SP2 with KB932755. Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the minport driver. For boot installations, Windows Server 2003 SP2 install image is required followed by the KB update.
Enhancements
Updated driver to version 9.1.9.25
Version:3.13.0.0 (9 Feb 2011)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This driver installation with HP Smart Component requires a minimum Windows Server 2003 SP2 with KB932755. Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the minport driver. For boot installations, Windows Server 2003 SP2 install image is required followed by the KB update.
Updated driver contains the following fix:
- g-port issue: after rebooting or pulling and replacing c-Class switches or vc devices, switch ports connected to the device could be left in g-port mode.
Enhancements
Updated driver to version 9.1.8.28
Version:3.12.0.0 (27 Oct 2010)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This driver installation with HP Smart Component requires a minimum Windows Server 2003 SP2 with KB932755. Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the minport driver. For boot installations, Windows Server 2003 SP2 install image is required followed by the KB update.
Updated driver contains the following fixes:
- Brocade encryption issue
- ID129 issue on Integrity servers
- Apex support (QOS for XP storage array)
Enhancements
Updated driver to version 9.1.8.27