Printable version

Drivers & software

* RECOMMENDED * HPE Firmware Online Flash for QLogic Fibre Channel Host Bus Adapters - Windows 2008/2012 (x64)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Storage Fibre Channel and Fibre Channel Over Ethernet
Version: 2016.02.01(1 Apr 2016)
Operating System(s): Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Storage Server 2008 R2
Microsoft Windows Storage Server 2008 x64 Editions
File name: cp027599.exe (2.2 MB)
Online firmware update component for HPE QLogic Fibre Channel Host Based Adapters

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hp.com/storage/spock/

The HP supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.02.0, which is available at www.hp.com/go/spp/download:

  • HPE Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver v9.1.16.21, cp027610.exe
  • HPE Storage Fibre Channel Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.16.21, cp027611.exe
     
  • HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver v9.1.13.10, cp025685.exe
  • HP Storage Fibre Channel Over Ethernet Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.13.10, cp025684.exe
     

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

a4b7d81efe538addea19e3590633db53251511cafe877d1e551de6ba301935a9 cp027599.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
gSOAP Software End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:
Release Notes:
HP StorageWorks QLogic Adapters Release Notes


Supported Devices and Features:

This firmware supports the following HP adapters:       

  • HP 81Q PCIe Fibre Channel Host Bus Adapter    
  • HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter       
  • QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP QMH2572 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP StoreFabric SN1000Q 16Gb Fibre Channel Host Bus Adapter
  • HP QMH2672 16Gb FC HBA for c-Class BladeSystem

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the "Enable Asynchronous Event to Immediate Notify IOCB" option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Version:2019.03.02 (25 Jul 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

Transceiver with part number 5700-0077 requires a minimum of 10ms after a write operation before reading it back. But the current Firmware is not waiting long enough, manifests as an intermittently incomplete to connect to Fabric

For more details please go through the document titled "HPE StoreFabric Host Bus Adapters - During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels" at the following link:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00078768en_us

Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • Gen4 Fibre Channel Host Bus Adapter:
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • Gen5 Fibre Channel Host Bus Adapter:
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • Gen6 Fibre Channel Host Bus Adapter: 
    • Package 1.72.02
    • Firmware 8.08.220
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.01 (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)
Enhancements

Added support for the following:

16Gb/32Gb Standup

Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb 
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2018.11.01 (27 Nov 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

 

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

 

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure)  fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.
Enhancements

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.06.01 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

 

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

 

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure)  fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.
Enhancements

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.02.01 (5 Feb 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following:

8Gb Standup & 8Gb Mezzanine

BIOS

  •  CTRL-Q cosmetic unexpected behavior

UEFI

  •  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete.
  •  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Force Fast Discovery
  •  Human Interface Infrastructure (HII) save unexpected behavior on Superdome servers. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non  Volatile Random Access Memory (NVRAM)
  •  Unexpected behavior which caused adapter to not appear on the Health Summary page.
  •  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Auto
  •  World Login unexpected behavior when Power On Self -Test (POST) Discovery Mode was set to Auto

 

16Gb Standup & 16Gb Mezzanine

UEFI

  •  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete

 

16Gb/32Gb Standup

UEFI

  •  Human Interface Infrastructure (HII) save unexpected behavior. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM).
  •  Corrected adapter name format in Read Only Memory (ROM) Based Setup-Utility (RBSU) menus.
  •  Unexpected behavior that caused Non Volatile Random Access Memory (NVRAM) overwritten after Human Interface Infrastructure (HII) changes
  •  Behavior that caused Human Interface Infrastructure (HII) fields to not revert back to original settings when ESC key was used to discard changes
Enhancements

Added support for the following:

8Gb Standup & 8Gb Mezzanine

  • Additional "show Command Line Processor (CLP's)".
  • Gen10 Driver Health error codes.

16Gb Standup & 16Gb Mezzanine

  • Gen10 Driver Health error codes
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.

16Gb/32Gb Standup

  • Gen10 Driver Health error codes.
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.
  • Semaphore checks before flash reads and writes

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.03
    • Firmware 8.05.00
    • UEFI 6.59
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.50
    • Firmware 8.05.64
    • UEFI 6.58
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.66
    • Firmware 8.05.65
    • UEFI 6.41
    • BIOS 3.54

Version:2017.09.01 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

BIOS

  • Incorrect processing of Command Line Processor (CLP)  ‘set netport’
  • Improper display of Command Line Processor (CLP) Logical Unit Number (LUN)

UEFI

  • Changed Operation Mode Human Interface Infrastructure (HII) strings. The new strings match the FastUTIL strings.
  • Self-certification Test (SCT) 2.4B BlockIO2 Protocol bug.
  • No response during Self-certification Test (SCT) 2.4B BlockIO2 Protocol test.
  • Self-certification Test (SCT) 2.4B AdapterInfo Protocol bugs.

 

16Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Adapter connection mode to change (OS install related) when the Human Interface Infrastructure (HII) Link Speed field changed.

 

32Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Added code to start operational firmware early.
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.06
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.41
    • Firmware 8.05.63
    • UEFI 6.54
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.51
    • Firmware 8.05.61
    • UEFI 6.36
    • BIOS 3.54

Version:2017.06.01 (12 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

 

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added code to allow direct connected LUN to be configured when FA_BLUN is enabled.

  • Fixed unexpected behavior in check_mem64 routine where pci address was not setup correctly.

  • Fixed bug that caused FlexAddress to stop

UEFI

  • Fixed HII Load Defaults issue onHP QMH2672 16Gb Fibre Channel Host Bus Adapter . HII Load defaults no longer adds items to the Adapter Settings menu

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

Enhancements

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

  • Added Scan Fibre Devices HII field

32Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.05
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.36
    • Firmware 8.05.60
    • UEFI 6.53
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.47
    • Firmware 8.05.60
    • UEFI 6.34
    • BIOS 3.54

Version:2016.12.01 (12 Dec 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for the following devices:

  • HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
       
  • 16 Gb HBA
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
       
  • 16/32 Gb SN1100Q/SN1600Q
    • Package 01.70.27
    • Firmware 8.03.10
    • UEFI 6.24
    • BIOS 3.37
       

Version:2016.09.01 (26 Sep 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for SN1600Q. 

Updated the Firmware/BIOS/UEFI packages for 32 Gb products

  • 32 Gb SN1600Q
    • Package 1.70.24
    • Firmware 8.03.10
    • UEFI 6.22
    • BIOS 3.37
       

Version:2016.10.01 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
       
  • 16 Gb SN1100Q
    • Package 01.70.17
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37
       

Version:2016.04.01 (31 Mar 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.05
    • Firmware 8.02.00
    • UEFI 6.43
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.05
    • Firmware 8.02.00
    • UEFI 6.38
    • BIOS 3.31
       
  • 16 Gb SN1100Q
    • Package 01.70.15
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37
       

Version:2016.02.01 (1 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the "Enable Asynchronous Event to Immediate Notify IOCB" option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Version:2015.10.01 (1 Oct 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

    BIOS

  • Maintenance updates

    UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure

16Gb Standup & 16Gb Mezzanine

    BIOS

  • Maintenance updates

    UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure
  • Fixed OCBB polling error on servers
  • Fixed memory leak issue when driver exits due to NVRAM error
  • Fixed driver mapping issues on CLP enabled servers
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.73.05 (Binary 373A5)
    • Firmware 8.01.02
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.00.14
    • Firmware 8.01.42
    • UEFI 6.37
    • BIOS 3.31

Version:2015.06.01 (15 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • For 8 Gb UEFI
    • Fixed a driver load error when the Adapter Disable NVRAM bit was set.
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
       
  • 16 Gb HBA/Mezz
    • Package 5.00.12
    • Firmware 8.00.40
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.02 (21 Apr 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.
Enhancements

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
       
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.01 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8 Gb Products
 
BIOS

  • Changed VLAN ID max value from 4095 to 4094
  • Changed CTRL-Q to allow max value for Login Retry
UEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs
  • Fixed drive mapping issues on CLP enabled servers


16 Gb Products
   
BIOS 

  • Fixed LUN enabled but fabric assigned BOOT LUN not found
  • Changed CTRL-Q to allow max value for Login Retry
UEFI  
  •  Fixed memory leak issue when driver exits due to NVRAM error
     
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.71.09 (Binary 371A9)
    • Firmware 7.04.00
    • UEFI 6.35
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN 
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
         
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
         

Version:2014.09.01 (9 Sep 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


8 Gb Products
 
BIOS

  • Fixed bug in displaying selectable boot lun
  • Fixed issue with not restoring defaults on port 1
  • Fixed bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Added additional time to login target when called  after EFI driver unloads.    
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected. 
uEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers. 


16 Gb Products
   
BIOS 

  • Added additional time to login target when called after EFI driver unloads.    
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected. 
uEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.  
Enhancements

Updated the firmware/BIOS/EFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.01 (Binary 371A1)
    • Firmware 7.03.00
    • BIOS 3.24
    • UEFI 6.32
  • 16 Gb HBA/Mezz
    • Package 4.00.12
    • Firmware 7.03.01
    • BIOS 3.24
    • UEFI 6.29
       

Version:2014.04.01 (21 Apr 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Updated the firmware/BIOS packages for 8 Gb and 16 Gb products


  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • QMH2572 Mezz Card
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot
       
    • Package 3.60A4
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.28
       
  • 16 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot
       
    • Package 3.90.02
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.25
       

Version:2014.02.01 (18 Feb 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added UEFI driver for 8 Gb and 16 Gb products (except QMH2572).
     
    This component contains:
     
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.60A2  
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.23
       
  • 16 Gb HBA/Mezz
    • Package 3.90.01
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.20
       
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       

Version:2013.08.01 (10 Sep 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


SN1000Q BIOS fixes: 

  • Fixed issue in CTRL_Q utility that might cause some cosmetic display issues.
  • Fixed issue with CTRL-Q Loopback Utility.

SN1000Q FW fixes:

  • Intermittent link failures that occurred after a cable pull.
  • Firmware failed to detect port id change after Fabric login timeout.
  • Performance scaling issues on multiple 4G tape devices.
  • Resolved a low write performance (throughput) issue seen when running single
    threaded IOs to multiple slower targets.
  • If the disable VP command was received while an ELS PassThru exchange was active
    for VP being disabled this caused a firmware buffer pool corruption and the
    firmware stopped responding.
  • A possible command iocb timeout occurred if the driver provided an invalid response
    queue reference.

     
Enhancements

  • Added new firmware/BIOS packages for 8 Gb and 16 Gb products


  • 8 Gb HBA/Mezz
    • Package 2.65A1  
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.15
       
  • SN1000Q/QMH2672
    • Package 2.02.47
    • Firmware 6.07.02
    • BIOS 3.21
      • Now checks for invalid LUN in CTRL-Q scan devices
      • Check for 4G flag in NVRAM for FC.
    • UEFI 6.13
       
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13

 


Version:2013.02.01 (19 Feb 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


SN1000Q BIOS changes from 3.14 to 3.18:
 

  • Added code to check/program Feature Config checksum.  
  • Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command               
  • Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
  • Added code to check/program Feature Config checksum.
  • Fixed Lun select & display issues with CTRL-Q

 

Enhancements

  • Added new firmware/BIOS package

  • SN1000Q, 2.01.10
    • Firmware 6.02.00
    • BIOS 3.18

       

Version:2012.10.01 (26 Oct 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added new firmware/BIOS packages

  • 4 Gb HBA/Mezz cards, 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz cards, 2.58AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • QMH2572 8 Gb FC Mezz, 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       

Version:2012.08.01 (4 Sep 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added code to handle a possible failed LUN condition due to an invalid drive geometry reported to the system.

Enhancements

Updated firmware/BIOS packages for Fibre Channel options supported by this component:

  • 4 Gb HBA/Mezz cards, 2.01AF
    • Firmware 5.03.15
    • BIOS 3.12
  • 8 Gb HBA/Mezz cards, 2.55AF
    • Firmware 5.03.15
    • BIOS 3.12
  • QMH2572 8 Gb FC Mezz, 2.56AF
    • Firmware 5.06.04
    • BIOS 3.12

 


Type: Firmware - Storage Fibre Channel and Fibre Channel Over Ethernet
Version: 2016.02.01(1 Apr 2016)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Storage Server 2008 R2
Microsoft Windows Storage Server 2008 x64 Editions

Description

Online firmware update component for HPE QLogic Fibre Channel Host Based Adapters

Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Installation Instructions

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hp.com/storage/spock/

The HP supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.02.0, which is available at www.hp.com/go/spp/download:

  • HPE Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver v9.1.16.21, cp027610.exe
  • HPE Storage Fibre Channel Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.16.21, cp027611.exe
     
  • HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver v9.1.13.10, cp025685.exe
  • HP Storage Fibre Channel Over Ethernet Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.13.10, cp025684.exe
     

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

a4b7d81efe538addea19e3590633db53251511cafe877d1e551de6ba301935a9 cp027599.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
gSOAP Software End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:
Release Notes:
HP StorageWorks QLogic Adapters Release Notes


Supported Devices and Features:

This firmware supports the following HP adapters:       

  • HP 81Q PCIe Fibre Channel Host Bus Adapter    
  • HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter       
  • QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP QMH2572 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP StoreFabric SN1000Q 16Gb Fibre Channel Host Bus Adapter
  • HP QMH2672 16Gb FC HBA for c-Class BladeSystem

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the "Enable Asynchronous Event to Immediate Notify IOCB" option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Important

Revision History

Version:2019.03.02 (25 Jul 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

Transceiver with part number 5700-0077 requires a minimum of 10ms after a write operation before reading it back. But the current Firmware is not waiting long enough, manifests as an intermittently incomplete to connect to Fabric

For more details please go through the document titled "HPE StoreFabric Host Bus Adapters - During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels" at the following link:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00078768en_us

Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • Gen4 Fibre Channel Host Bus Adapter:
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • Gen5 Fibre Channel Host Bus Adapter:
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • Gen6 Fibre Channel Host Bus Adapter: 
    • Package 1.72.02
    • Firmware 8.08.220
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.01 (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)
Enhancements

Added support for the following:

16Gb/32Gb Standup

Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb 
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2018.11.01 (27 Nov 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

 

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

 

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure)  fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.
Enhancements

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.06.01 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

 

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

 

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure)  fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.
Enhancements

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.02.01 (5 Feb 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixed the following:

8Gb Standup & 8Gb Mezzanine

BIOS

  •  CTRL-Q cosmetic unexpected behavior

UEFI

  •  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete.
  •  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Force Fast Discovery
  •  Human Interface Infrastructure (HII) save unexpected behavior on Superdome servers. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non  Volatile Random Access Memory (NVRAM)
  •  Unexpected behavior which caused adapter to not appear on the Health Summary page.
  •  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Auto
  •  World Login unexpected behavior when Power On Self -Test (POST) Discovery Mode was set to Auto

 

16Gb Standup & 16Gb Mezzanine

UEFI

  •  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete

 

16Gb/32Gb Standup

UEFI

  •  Human Interface Infrastructure (HII) save unexpected behavior. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM).
  •  Corrected adapter name format in Read Only Memory (ROM) Based Setup-Utility (RBSU) menus.
  •  Unexpected behavior that caused Non Volatile Random Access Memory (NVRAM) overwritten after Human Interface Infrastructure (HII) changes
  •  Behavior that caused Human Interface Infrastructure (HII) fields to not revert back to original settings when ESC key was used to discard changes
Enhancements

Added support for the following:

8Gb Standup & 8Gb Mezzanine

  • Additional "show Command Line Processor (CLP's)".
  • Gen10 Driver Health error codes.

16Gb Standup & 16Gb Mezzanine

  • Gen10 Driver Health error codes
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.

16Gb/32Gb Standup

  • Gen10 Driver Health error codes.
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.
  • Semaphore checks before flash reads and writes

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.03
    • Firmware 8.05.00
    • UEFI 6.59
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.50
    • Firmware 8.05.64
    • UEFI 6.58
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.66
    • Firmware 8.05.65
    • UEFI 6.41
    • BIOS 3.54

Version:2017.09.01 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

BIOS

  • Incorrect processing of Command Line Processor (CLP)  ‘set netport’
  • Improper display of Command Line Processor (CLP) Logical Unit Number (LUN)

UEFI

  • Changed Operation Mode Human Interface Infrastructure (HII) strings. The new strings match the FastUTIL strings.
  • Self-certification Test (SCT) 2.4B BlockIO2 Protocol bug.
  • No response during Self-certification Test (SCT) 2.4B BlockIO2 Protocol test.
  • Self-certification Test (SCT) 2.4B AdapterInfo Protocol bugs.

 

16Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Adapter connection mode to change (OS install related) when the Human Interface Infrastructure (HII) Link Speed field changed.

 

32Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Added code to start operational firmware early.
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.06
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.56
       
  • 16 Gb HBA/Mezz
    • Package 6.01.41
    • Firmware 8.05.63
    • UEFI 6.54
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.51
    • Firmware 8.05.61
    • UEFI 6.36
    • BIOS 3.54

Version:2017.06.01 (12 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

 

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added code to allow direct connected LUN to be configured when FA_BLUN is enabled.

  • Fixed unexpected behavior in check_mem64 routine where pci address was not setup correctly.

  • Fixed bug that caused FlexAddress to stop

UEFI

  • Fixed HII Load Defaults issue onHP QMH2672 16Gb Fibre Channel Host Bus Adapter . HII Load defaults no longer adds items to the Adapter Settings menu

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

Enhancements

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

  • Added Scan Fibre Devices HII field

32Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.05
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.36
    • Firmware 8.05.60
    • UEFI 6.53
    • BIOS 3.43
       
  • 16/32 Gb 
    • Package 01.70.47
    • Firmware 8.05.60
    • UEFI 6.34
    • BIOS 3.54

Version:2016.12.01 (12 Dec 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for the following devices:

  • HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
       
  • 16 Gb HBA
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
       
  • 16/32 Gb SN1100Q/SN1600Q
    • Package 01.70.27
    • Firmware 8.03.10
    • UEFI 6.24
    • BIOS 3.37
       

Version:2016.09.01 (26 Sep 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for SN1600Q. 

Updated the Firmware/BIOS/UEFI packages for 32 Gb products

  • 32 Gb SN1600Q
    • Package 1.70.24
    • Firmware 8.03.10
    • UEFI 6.22
    • BIOS 3.37
       

Version:2016.10.01 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Added support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
       
  • 16 Gb SN1100Q
    • Package 01.70.17
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37
       

Version:2016.04.01 (31 Mar 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.05
    • Firmware 8.02.00
    • UEFI 6.43
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.05
    • Firmware 8.02.00
    • UEFI 6.38
    • BIOS 3.31
       
  • 16 Gb SN1100Q
    • Package 01.70.15
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37
       

Version:2016.02.01 (1 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the "Enable Asynchronous Event to Immediate Notify IOCB" option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Version:2015.10.01 (1 Oct 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8Gb Standup & 8Gb Mezzanine

    BIOS

  • Maintenance updates

    UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure

16Gb Standup & 16Gb Mezzanine

    BIOS

  • Maintenance updates

    UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure
  • Fixed OCBB polling error on servers
  • Fixed memory leak issue when driver exits due to NVRAM error
  • Fixed driver mapping issues on CLP enabled servers
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.73.05 (Binary 373A5)
    • Firmware 8.01.02
    • UEFI 6.42
    • BIOS 3.31
       
  • 16 Gb HBA/Mezz
    • Package 6.00.14
    • Firmware 8.01.42
    • UEFI 6.37
    • BIOS 3.31

Version:2015.06.01 (15 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • For 8 Gb UEFI
    • Fixed a driver load error when the Adapter Disable NVRAM bit was set.
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
       
  • 16 Gb HBA/Mezz
    • Package 5.00.12
    • Firmware 8.00.40
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.02 (21 Apr 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.
Enhancements

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
       
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.01 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


8 Gb Products
 
BIOS

  • Changed VLAN ID max value from 4095 to 4094
  • Changed CTRL-Q to allow max value for Login Retry
UEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs
  • Fixed drive mapping issues on CLP enabled servers


16 Gb Products
   
BIOS 

  • Fixed LUN enabled but fabric assigned BOOT LUN not found
  • Changed CTRL-Q to allow max value for Login Retry
UEFI  
  •  Fixed memory leak issue when driver exits due to NVRAM error
     
Enhancements

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.71.09 (Binary 371A9)
    • Firmware 7.04.00
    • UEFI 6.35
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN 
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
         
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
         

Version:2014.09.01 (9 Sep 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


8 Gb Products
 
BIOS

  • Fixed bug in displaying selectable boot lun
  • Fixed issue with not restoring defaults on port 1
  • Fixed bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Added additional time to login target when called  after EFI driver unloads.    
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected. 
uEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers. 


16 Gb Products
   
BIOS 

  • Added additional time to login target when called after EFI driver unloads.    
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected. 
uEFI  
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.  
Enhancements

Updated the firmware/BIOS/EFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.01 (Binary 371A1)
    • Firmware 7.03.00
    • BIOS 3.24
    • UEFI 6.32
  • 16 Gb HBA/Mezz
    • Package 4.00.12
    • Firmware 7.03.01
    • BIOS 3.24
    • UEFI 6.29
       

Version:2014.04.01 (21 Apr 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Updated the firmware/BIOS packages for 8 Gb and 16 Gb products


  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • QMH2572 Mezz Card
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot
       
    • Package 3.60A4
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.28
       
  • 16 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot
       
    • Package 3.90.02
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.25
       

Version:2014.02.01 (18 Feb 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added UEFI driver for 8 Gb and 16 Gb products (except QMH2572).
     
    This component contains:
     
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz
    • Package 3.60A2  
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.23
       
  • 16 Gb HBA/Mezz
    • Package 3.90.01
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.20
       
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       

Version:2013.08.01 (10 Sep 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


SN1000Q BIOS fixes: 

  • Fixed issue in CTRL_Q utility that might cause some cosmetic display issues.
  • Fixed issue with CTRL-Q Loopback Utility.

SN1000Q FW fixes:

  • Intermittent link failures that occurred after a cable pull.
  • Firmware failed to detect port id change after Fabric login timeout.
  • Performance scaling issues on multiple 4G tape devices.
  • Resolved a low write performance (throughput) issue seen when running single
    threaded IOs to multiple slower targets.
  • If the disable VP command was received while an ELS PassThru exchange was active
    for VP being disabled this caused a firmware buffer pool corruption and the
    firmware stopped responding.
  • A possible command iocb timeout occurred if the driver provided an invalid response
    queue reference.

     
Enhancements

  • Added new firmware/BIOS packages for 8 Gb and 16 Gb products


  • 8 Gb HBA/Mezz
    • Package 2.65A1  
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.15
       
  • SN1000Q/QMH2672
    • Package 2.02.47
    • Firmware 6.07.02
    • BIOS 3.21
      • Now checks for invalid LUN in CTRL-Q scan devices
      • Check for 4G flag in NVRAM for FC.
    • UEFI 6.13
       
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13

 


Version:2013.02.01 (19 Feb 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


SN1000Q BIOS changes from 3.14 to 3.18:
 

  • Added code to check/program Feature Config checksum.  
  • Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command               
  • Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
  • Added code to check/program Feature Config checksum.
  • Fixed Lun select & display issues with CTRL-Q

 

Enhancements

  • Added new firmware/BIOS package

  • SN1000Q, 2.01.10
    • Firmware 6.02.00
    • BIOS 3.18

       

Version:2012.10.01 (26 Oct 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added new firmware/BIOS packages

  • 4 Gb HBA/Mezz cards, 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • 8 Gb HBA/Mezz cards, 2.58AF
    • Firmware 5.03.15
    • BIOS 3.13
       
  • QMH2572 8 Gb FC Mezz, 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
       

Version:2012.08.01 (4 Sep 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added code to handle a possible failed LUN condition due to an invalid drive geometry reported to the system.

Enhancements

Updated firmware/BIOS packages for Fibre Channel options supported by this component:

  • 4 Gb HBA/Mezz cards, 2.01AF
    • Firmware 5.03.15
    • BIOS 3.12
  • 8 Gb HBA/Mezz cards, 2.55AF
    • Firmware 5.03.15
    • BIOS 3.12
  • QMH2572 8 Gb FC Mezz, 2.56AF
    • Firmware 5.06.04
    • BIOS 3.12

 


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.