Print | Rate this content

HP StorageWorks 8/20q Fibre Channel Switch - After zoning changes are mode on a B-Series or Brocade remote fabric, an HBA in the local 8/20q Fibre Channel Switch sometimes does not see new targets

ISSUE: After zoning changes are mode on a B-Series or Brocade remote fabric, an HBA in the local 8/20q Fibre Channel Switch sometimes does not see new targets.
WORKAROUND: Reset ports on B-Series or Brocade switches where affected devices are attached.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HP StorageWorks 8/20q Fibre Channel Switch - After zoning changes are mode on a B-Series or Brocade remote fabric, an HBA in the local 8/20q Fibre Channel Switch sometimes does not see new targets
Document ID: emr_na-c01700495-1
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.