Print | Rate this content

HPE FlexFabric 5980 Switch Series - Specifications

Technical specifications

Specifications
Description
I/O ports and slots
48 fixed 1000/10000 SFP+ ports 6 QSFP28 100 GbE ports
Additional ports and slots
  • 1 x 10M/100M/1000M Base-T copper port

  • 1 x SFP port

  • 1 x mini USB console port (USB 2.0)

  • 1 x USB port (USB 2.0)

  • 1 x serial console port

Power supplies
  • 2 power supply slots

  • 1 minimum power supply required (Ordered separately)

Fan tray
5 fan tray slots
To ensure good ventilation of the switch, follow these guidelines to install and remove fan trays:
  • The switch comes with the fan tray slots empty. Before powering on the switch, make sure allfan tray slots have fan trays installed and the fan trays are the same model

  • Make sure all slots have a module or filler panel installed when the switch is operating

  • If multiple fan trays fail on an operating switch, do not remove the fan trays at the same time.Replace the fan trays one after another and finish replacing a fan tray within 3 minutes

Performance
10 Gb/s Latency
< 10 us (64B packets)
Throughput
up to 800 Mp/s
Routing/Switching capacity
720 Gb/s
Routing table size
250K entries (IPv4), 128K entries (IPv6)
MAC address table size
350000 entries
Management
  • Intelligent Management Center (IMC)

  • Command-Line Interface (CLI)

  • Out-Of-Band management

  • SNMP manager

  • Telnet

  • FTP

Physical specifications

Specifications
Description
Dimensions (H x W x D)
4.36 x 44 x 46 cm (1.72 x 17.32 x 18.11 in)
Weight
Shipping weight: 13 kg (28.66 lb)

Electrical specifications

Specifications
Description
Voltage
  • 100 - 240 V ac, rated

  • -40 - -60 V dc, rated (Depending on power supply chosen)

Maximum power rating
340 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (If equipped), 100% traffic, all ports plugged in, and all modules populated

Environmental specifications

Specifications
Description
Operating temperature
0° to 45°C (32° to 113°F)
Operating relative humidity
10% to 90%, non-Condensing
Acoustic
  • Low-Speed fan: 63.3 dB

  • High-Speed fan: 77.6 dB

Maximum heat dissipation
986 BTU/hr (1040.29 kJ/hr)

Safety certifications

Specifications
Description
Safety
  • UL 60950-1

  • CAN/CSA C22.2 No 60950-1

  • IEC 60950-1

  • EN 60950-1

  • AS/NZS 60950-1

  • FDA 21 CFR Subchapter J

Emissions
  • FCC Part 15 (CFR 47) CLASS A

  • ICES-003 CLASS A

  • VCCI CLASS A

  • CISPR 22 CLASS A

  • EN 55022 CLASS A

  • AS/NZS CISPR22 CLASS A

  • CISPR 32 CLASS A

  • EN 55032 CLASS A

  • AS/NZS CISPR32 CLASS A

  • EN 61000-3-2

  • EN 61000-3-3

  • ETSI EN 300 386

Immunity
  • CISPR 24

  • EN 55024

  • ETSI EN 300 386

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!