Print | Rate this content

HPE ProLiant DL360 Gen9 Server - LED Indicators

Front panel LEDs and buttons

8 SFF

Item
Description
Status
1
Power ON/Standby button and system power LED
  • Solid green = System ON

  • Flashing green (1 Hz/cycle per sec) = Performing power ON sequence

  • Solid amber = System in standby

  • OFF = No power present

2
Health LED
  • Solid green = Normal

  • Flashing green (1 Hz/cycle per sec) = iLO is rebooting

  • Flashing amber = System degraded

  • Flashing red (1 Hz/cycle per sec) = System critical

3
NIC status LED
  • Solid green = Link to network

  • Flashing green (1 Hz/cycle per sec) = Network active

  • OFF = No network activity

4
UID button/LED
  • Solid blue = Activated

  • Flashing blue

    • 1 Hz/cycle per sec = Remote management or firmware upgrade in progress

    • 4 Hz/cycle per sec = iLO manual reboot sequence initiated

    • 8 Hz/cycle per sec = iLO manual reboot sequence in progress

  • OFF = Deactivated

4 LFF

Item
Description
Status
1
UID button/LED
  • Solid blue = Activated

  • Flashing blue

    • 1 Hz/cycle per sec = Remote management or firmware upgrade in progress

    • 4 Hz/cycle per sec = iLO manual reboot sequence initiated

    • 8 Hz/cycle per sec = iLO manual reboot sequence in progress

  • OFF = Deactivated

2
NIC status LED
  • Solid green = Link to network

  • Flashing green (1 Hz/cycle per sec) = Network active

  • OFF = No network activity

3
Health LED
  • Solid green = Normal

  • Flashing green (1 Hz/cycle per sec) = iLO is rebooting

  • Flashing amber = System degraded

  • Flashing red (1 Hz/cycle per sec) = System critical

4
Power ON/Standby button and system power LED
  • Solid green = System ON

  • Flashing green (1 Hz/cycle per sec) = Performing power ON sequence

  • Solid amber = System in standby

  • OFF = No power present

top

Power fault LEDs

Subsystem
LED behavior
System board
1 flash
Processor
2 flashes
Memory
3 flashes
Riser board PCIe slots
4 flashes
FlexibleLOM
5 flashes
Removable HP flexible smart array controller/Smart SAS HBA controller
6 flashes
System board PCIe slots
7 flashes
Power backplane or storage backplane
8 flashes
Power supply
9 flashes

top

Rear panel LEDs and buttons

Item
Description
Status
1
UID LED
  • Solid blue = Identification is activated

  • Flashing blue = System is being managed remotely

  • OFF = Identification is deactivated

2L
HP iLO/standard NIC activity LED
  • Solid green = Activity exists

  • Flashing green = Activity exists

  • OFF = No activity exists

2R
HP iLO/standard NIC link LED
  • Solid green = Link exists

  • OFF = No link exists

3
Power supply 2 LED
  • Solid green = Normal

  • OFF = One or more of the following conditions exists:

    • AC power unavailable

    • Power supply failed

    • Power supply in standby mode

    • Power supply exceeded current limit

4
Power supply 1 LED
  • Solid green = Normal

  • OFF = One or more of the following conditions exists:

    • AC power unavailable

    • Power supply failed

    • Power supply in standby mode

    • Power supply exceeded current limit

top

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HPE ProLiant DL360 Gen9 Server -LED Indicators
Document ID: emr_na-c04444491-4
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.