Print | Rate this content

Notice: HPE P2000 G3 MSA Array Systems Controller Firmware TS252P005 is Now Available

SUPPORT COMMUNICATION - CUSTOMER NOTICE

Document ID: c05404265

Version: 1

Notice: HPE P2000 G3 MSA Array Systems Controller Firmware TS252P005 is Now Available
NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice.

Release Date: 2017-02-24

Last Updated: 2017-02-24


DESCRIPTION

This notice announces the release of controller firmware version TS252P005 for Hewlett Packard Enterprise P2000 G3 MSA Array Systems. This is a planned update to a regular release for the HPE P2000 G3 MSA controllers listed below:

  • HPE P2000 G3 MSA 10GbE iSCSI MSA
  • HPE P2000 G3 MSA 1GbE iSCSI MSA
  • HPE P2000 G3 MSA FC/iSCSI Combo MSA
  • HPE P2000 G3 MSA Fibre Channel MSA
  • HPE P2000 G3 MSA SAS MSA

HPE recommends upgrading HPE P2000 G3 MSA Storage controllers to firmware version TS252P005 and other application software that may be compatible. See the firmware release notes for all firmware updates.

Upgrade all your HPE P2000 G3 MSA Array Systems to TS250 or the latest released firmware version before flashing with TS252. For arrays on earlier versions of firmware, upgrade to TS230P008 first, then TS240P004, and then TS250P003 before upgrading to TS252P005.

DETAILS

Enhancements in TS252P005

  • Upgraded OpenSSL to 1.0.2j
  • Added description and help text for the new quarantine event (590)
  • Disabled in-band SCSI Enclosure Management Services (SES) protocol by default, alleviating controller issues in environments where SES devices were actively monitored
  • Added support for SCSI Send Diagnostic command when in-band SES is disabled
  • Improved HPE D2700 Disk Enclosure fan information in CLI

Fixes in TS252P005

  • Controller ceased to operate due to page fault
  • Transient error caused array to incorrectly report 314 ERROR event in event logs
  • Replications stalled on primary volume due to issue with queue full condition
  • iSCSI controllers provided incorrect maximum transfer size in the Vital Product Data (VPD)
  • Controller ceased to operate due to page fault in mioL
  • Custom OpenSSL certificate could not be used

See the product release notes for complete details of the firmware update.

Download

To obtain the HPE P2000 G3 MSA Array Systems controller firmware:

  1. Go to

    http://www.hpe.com/support/p2000G3msa

    .
  2. Under Download options, click drivers, software & firmware.
  3. Select your HPE P2000 G3 MSA Array System.
  4. Select your operating system.
  5. Press + to expand the Firmware (Entitlement Required) - Storage Controller table.
  6. In the Download column of the table, click the Download link associated with the desired Windows or Linux file.
    • To read the release notes, click the title of the firmware, then click Release Notes.
    • Note that support validation is required. An active warranty or support agreement must be linked to your HPE Support Center profile to access this firmware.
  7. Select Sign-in now to sign in and download firmware.

Web Resources

HPE MSA Storage web page

https://www.hpe.com/us/en/storage/msa-shared-storage.html


The full compatibility matrix can be found on the HPE Single Point of Connectivity Knowledge (SPOCK) website:

https://spock.corp.int.hpe.com/spock/

RECEIVE PROACTIVE UPDATES : Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively in your e-mail through HPE Subscriber's Choice. Sign up for Subscriber's Choice at the following URL: Proactive Updates Subscription Form


Hardware Platforms Affected: HPE P2000 G3 MSA Array Systems
Operating Systems Affected: Not Applicable
Software Affected: Not Applicable
Support Communication Cross Reference ID: IA05404265
©Copyright 2017 Hewlett Packard Enterprise Company, L.P.
Hewlett Packard Enterprise Company shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law, neither HPE nor its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages including downtime cost; lost profits; damages relating to the procurement of substitute products or services; or damages for loss of data, or software restoration. The information in this document is subject to change without notice. Hewlett Packard Enterprise Company and the names of Hewlett Packard Enterprise Company products referenced herein are trademarks of Hewlett Packard Enterprise Company in the United States and other countries. Other product and company names mentioned herein may be trademarks of their respective owners.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: Notice: HPE P2000 G3 MSA Array Systems Controller Firmware TS252P005 is Now Available
Document ID: emr_na-c05404265-1
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.