Print | Rate this content

HPE ProLiant DL380 Gen9 Server - Cabling

Two-bay SFF drive cage option cabling

2 SFF drive bay option rear installation

Connect the power cable:

  • Single cable connection with 12 LFF drive configuration in the front

Y cable connection with 24 SFF drive configuration in front

Connect the data cable:

  • Connected to the onboard x4 SATA connector

Connected to the x2 SATA port and optical disk drive connector

Connected to a PCI expansion board

Connected to a PCI expansion board and the 12 LFF drive backplane

Connected to an HPE 12G SAS Expander Card

top

Three-bay LFF rear drive cage cabling

Connect the power cable.

Connect the data cable:

  • Connected to onboard SATA connectors

  • Connected to a PCI expansion board

  • Connected to a PCI expansion board and the 12 LFF drive backplane

  • Connected to an HPE 12G SAS Expander Card

top

Eight-bay SFF front drive cage cabling

Bay 1 installation

Connect the power cable:

  • Single cable connection

  • Y cable connection if the two-bay SFF drive cage option is installed in the rear bay

Connect the data cable:

  • Connected to a PCI expansion board

  • Connected to an HPE 12G SAS Expander Card

Bay 2 installation

Connect the power cable

Connect the data cable:

  • Connected to a PCI expansion board

  • Connected to an HPE 12G SAS Expander Card

top

Universal media bay cabling

Connect the VGA cable to the optional VGA connector. Connect the USB cable to the front dual internal USB 3.0 connector.

Connect the SATA optical drive cable to the front optical disk drive connector.

Connect the 2 SFF drive bay data cable to one of the following connections, depending on the configuration:
  • PCI expansion board

  • x4 SATA connector

Connect the 2 SFF drive bay power cable.

top

150 W PCIe power cable option

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI expansion cage.

top

M.2 SSD Enablement Board option cabling

The M.2 SSD Enablement Board option is supported in both the primary and secondary PCI riser cage.

Cable the option according to the location in the server:

  • Primary PCI riser cage

  • Secondary PCI riser cage

top

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HPE ProLiant DL380 Gen9 Server - Cabling
Document ID: emr_na-c05067821-2
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.