Print | Rate this content

HPE ProLiant ML10 v2 Server - Overview

Product description

HPE ProLiant ML10 v2, a single-socket 4U tower server, delivers essential availability and expansion needed to accommodate changing business needs. It is ideal for remote sites and corporate branch offices running file/print, web messaging, and small vertical applications or databases.


Product features

Processor (One of the following depending on model)
Entry processors 1
Intel Pentium G3240 (3.1 GHz/2-core/3MB/54 W)
Base processors 2
Intel CoreTM i3-4130 (3.4 GHz/2-core/3MB/54 W, HT)
Intel CoreTM i3-4150 (3.5 GHz/2-core/3MB/54 W, HT)
Performance processors 2
Intel Xeon E3-1220v3 (3.1 GHz/4-core/8MB/80 W)
Intel Xeon E3-1231v3 (3.4 GHz/4-core/8MB/80 W, HT)
Intel Xeon E3-1241v3 (3.5 GHz/4-core/8MB/80 W, HT)
Cache memory (One of the following depending on model)
  • 8MB (1 x 8MB) L3 Cache3

  • 3MB (1 x 3MB) L3 Cache4

Intel C222 series chipset
  • Upgradeable to 4 cores5

  • Up to 4 DIMM slots available for higher memory capacity

  • Up to 4 LFF Hard Drive Bays

  • 1 x8 and 1 x16 PCIe 3.0 and 1 x8 and 1x4 PCIe 2.0 I/O slots for additional communications and storage expansion

  • Optical Drive Bay (up to 2)

On system management processor
HP iLO (Firmware: HP iLO4)
Memory protection
Memory 6
HP SmartMemory
DDR3 Unbuffered (UDIMM)
DIMM slots
Total 4 DIMM slots
32GB (4 x 8GB UDIMM)
Network controller
HP Ethernet 1Gb 2-port 332i Adapter
Expansion slots
Expansion Slot #
Connector width
Form factor
PCIe 2.0
Half Length/Full Height
PCIe 2.0
Full Length/Full Height
PCIe 3.0
Full Length/Full Height
PCIe 3.0
Full Length/Full Height
Storage controller 8
HP Dynamic Smart Array B120i Controller
Internal storage devices
Optical drives (One of the following depending on model)
HP Half-Height SATA DVD-ROM Optical Drive
HP Half-Height SATA DVD-RW Optical Drive
Hard drive bays 9(One of the following depending on model)
4 LFF drive bays (non-hot-plug)
Maximum internal storage (One of the following depending on model)
Non Hot Plug LFF SATA
  • 16TB (4 x 4TB)

1 (rear)
USB 3.0
4 (2 front, 2 rear)
Network RJ-45 (Ethernet)
2 (1 shared for HP Integrated Lights-Out)
Industry standard compliance
  • ACPI 2.0b Compliant

  • PCIe 3.0 Compliant

  • PXE Support

  • WOL Support

  • Microsoft Logo certifications

  • USB 2.0/3.0 Support

Server power cords
Ships standard with a 6' country specific NEMA power cord.
Power supply
350 W multi-output power supply. Non redundant power supply.
System fans
One Non-redundant system fan ships standard
Integrated Matrox G200 video standard
  • 1280 x 1024 (32 bpp)

  • 1920 x 1200 (16 bpp)

HP iLO 4 On System Management Memory
  • 256MB DDR 3 with ECC (112MB after ECC and video)

Form factor (One of the following depending on model)
Micro ATX Tower (4U) chassis with feet/bezel (H x W x L)
36.82 x 17.5 x 47.52 cm (14.5 x 6.89 x 18.71 in)
8 SFF Drive Bay Cage
11.72 x 14.57 x 12.16 cm (4.6 x 5.74 x 4.79 in)
4 LFF Drive Bay Cage
11.72 x 14.57 x 17.54 cm (4.6 x 5.74 x 6.90 in)
  • Power-on password

  • Administrator's password

NOTE: 1: All support up to 1333MT/s DDR3 memory speeds.

2: All support up to 1600MT/s DDR3 memory speeds.

3: For Quad-core Xeon processors.

4: For Dual-core Pentium CoreTM i3 processors.

5: Total 2 or 4 cores

6: HP memory from previous generation servers are not fully compatible with the HP ProLiant ML10 v2 Server. Depending on the memory configuration and processor model, the memory speed may run at 1600MT/s or 1333MT/s.

7: Indicates the number of physical electrical lanes running to the connector.

8: Supports up to 6.0Gb/s SATA. (SATA port 0/1 support 6Gb/s and SATA port 2/3 support 3Gb/s). Supports RAID 0/1/10 only. No FBWC support. For FBWC, a standup Smart Array Controller card must be configured. For set up instructions, please refer to the HP ProLiant ML10 v2 series server user guide.

9: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit.


Software overview

Operating systems and virtualization software support for ProLiant servers 1
  • Microsoft Windows Server

  • Canonical Ubuntu

  • Red Hat Enterprise Linux (RHEL)

  • VMware

  • SUSE Linux Enterprise Server (SLES)

NOTE: 1: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for the server. Click here to visit the Support Matrix .


Link to driver, firmware, software and manuals

Click here to access the drivers, software & firmware .

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HPE ProLiant ML10 v2 Server - Overview
Document ID: emr_na-c04619142-6
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.