Print | Rate this content

HPE ProLiant ML150 G6 Server series - POST Error Message: "BMC SEL Is Full"

Issue

Error message:

BMC SEL Is Full

Solution

To avoid this error message, follow the steps given below:

  1. Boot the server and press the F10 key when prompted to run BIOS Setup.

  2. Select the Advanced menu.

  3. Scroll down to IPMI and press the ENTER key.

  4. Scroll down to the System Event Log and press the ENTER key.

  5. At the Clear System Event Log selection, press the ENTER key to toggle between Enable and Disable.

  6. Select Enable.

  7. Press the F10 key to save the changes and exit the BIOS Setup.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!