Print | Rate this content

HP ProLiant MicroServer - HP MicroServer Remote Access Card: How to Update Firmware Via WEB UI

Issue

How to update MicroServer Remote Access Card firmware via Web User Interface.

Solution

NOTE: Update feature is available when logged in with Administrator privileges.
  1. Log in the BMC Web and check the Properties page to check installed Firmware.

  2. Click the Update link from the left hand pane.

  3. Click Browse button, and select the folder where the firmware files are located, select BMC firmware (Phrixus.bmc.xxxxxxxx), and click Open button.

  4. Then click Upload button then click OK to upload firmware.

  5. Update is running:

  6. Update is finished.

  7. Connect the Web UI again to check the current BMC firmware version.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HP ProLiant MicroServer - HP MicroServer Remote Access Card: How to Update Firmware Via WEB UI
Document ID: emr_na-c03054498-1
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.