Print | Rate this content

HPE 2510 Switch Series - Overview

Product description

HP E2510-24 Switch (J9019B)
HP E2510-24G Switch (J9279A)
HP E2510-48 Switch (J9020A)
HP E2510-48G Switch (J9280A)
Designed to provide essential solutions to small and medium businesses, the HP ProCurve Switch 2510 Series consists of four Layer 2 managed switches that provide reliable 10/100 and 10/100/1000 connectivity. Building off of the popularity of the HP ProCurve Switch 2510-24, a 24-port 10/100 switch with two dual-personality ports, the 2510 series has expanded to include a higher-density HP ProCurve Switch 2510-48, with 48 10/100 ports and four Gigabit uplinks.

top

Product features

Click here to view the product features of HP E2510-24 Switch .

Click here to view the product features of HP E2510-24G Switch .

Click here to view the product features of HP E2510-48 Switch .

Click here to view the product features of HP E2510-48G Switch .

HP E2510-24 Switch
Feature
Description
Processor and memory
MIPS 32 @ 264 MHz, 8MB flash, 64MB SDRAM, packet buffer size: 384KB
Performance
  • 100Mb Latency:

    < 4.9 µs (64-byte packets)

  • 1000Mb latency:

    < 2.6 µs (64-byte packets)

  • Throughput:

    Up to 6.5 million pps (64-byte packets)

  • Switching capacity:

    8.8 Gb/s

  • MAC address table size:

    8000 entries

Ports
  • 24 RJ-45 auto-sensing 10/100 ports:

    • IEEE 802.3 type 10Base-T

    • IEEE 802.3u type 100Base-TX

  • Media type:

    • Auto-MDIX

    • Duplex: half or full

  • 2 dual-personality port. Each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot

Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
HP E2510-24G Switch
Feature
Description
Processor and memory
MIPS @ 264 MHz, 16MB flash, 64MB SDRAM, packet buffer size: 0.75MB
Performance
  • Latency:

    < 5.6 µs (FIFO 64-byte packets)

  • Throughput:

    Up to 35.7 million pps

  • Switching capacity:

    48 Gb/s

  • MAC address table size:

    8000 entries

Ports
  • 20 auto-sensing 10/100/1000 ports:

    • IEEE 802.3 type 10Base-T

    • IEEE 802.3u type 100Base-TX

    • IEEE 802.3ab type 1000Base-T

  • Media type:

    • Auto-MDIX

    • Duplex:

      • 10Base-T/100Base-TX: half or full

      • 1000Base-T: full only

  • 4 dual-personality port. Each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
HP E2510-48 Switch
Feature
Description
Processor and memory
MIPS 32 @ 300 MHz, 16MB flash, 128MB SDRAM, packet buffer size: 512KB
Performance
  • 100Mb Latency:

    < 4.9 µs (64-byte packets)

  • 1000Mb latency:

    < 2.9 µs (64-byte packets)

  • Throughput:

    Up to 13 million pps (64-byte packets)

  • Switching capacity:

    17.6 Gb/s

  • MAC address table size:

    8000 entries

Ports
  • 48 RJ-45 auto-sensing 10/100 ports:

    • IEEE 802.3 type 10Base-T

    • IEEE 802.3u type 100Base-TX

  • Media type:

    • Auto-MDIX

    • Duplex: half or full

  • 2 RJ-45 auto-sensing 10/100/1000 ports:

    • IEEE 802.3 type 10Base-T

    • IEEE 802.3u type 100Base-TX

    • IEEE 802.3ab type 1000Base-T

  • Media type:

    • Auto-MDIX

    • Duplex:

      • 10Base-T/100Base-TX: half or full

      • 1000Base-T: full only

  • 1 RJ-45 serial console port

  • 2 open mini-GBIC (SFP) slots

Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
HP E2510-48G Switch
Feature
Description
Processor and memory
MIPS @ 264 MHz, 16MB flash, 64MB SDRAM, packet buffer size: 1.5MB
Performance
  • Latency:

    < 5.4 µs (FIFO 64-byte packets)

  • Throughput:

    Up to 71.4 million pps

  • Switching capacity:

    96 Gb/s

  • MAC address table size:

    8000 entries

Ports
  • 44 auto-sensing 10/100/1000 ports:

    • IEEE 802.3 type 10Base-T

    • IEEE 802.3u type 100Base-TX

    • IEEE 802.3ab type 1000Base-T

  • Media type:

    • Auto-MDIX

    • Duplex:

      • 10Base-T/100Base-TX: half or full

      • 1000Base-T: full only

  • 4 dual-personality port. Each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only.

top

Link to drivers, firmware, software and manuals

Click here to access the drivers, firmware, software and manuals information .

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HP ProCurve Switch 2510 Series - Overview
Document ID: emr_na-c02620067-2
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.