Print | Rate this content

HP ProCurve Switch 2610 Series - Specifications

Physical specifications

Model
Feature
Dimensions (H x W x D)
Weight
HP ProCurve Switch 2610-48
4.39 x 44.2 x 23.62 cm (1.73 x 17.4 x 9.3 in) (1U height)
4.88 kg (10.75 lb), fully loaded
HP ProCurve Switch 2610-24
4.39 x 44.2 x 23.62 cm (1.73 x 17.4 x 9.3 in) (1U height)
2.49 kg (5.5 lb), fully loaded
HP ProCurve Switch 2610-24-PWR
4.39 x 44.2 x 31.75 cm (1.73 x 17.4 x 12.5 in) (1U height)
6.83 kg (15.05 lb), fully loaded
HP ProCurve Switch 2610-48-PWR
4.39 x 44.2 x 34.29 cm (1.73 x 17.4 x 13.5 in ) (1U height)
7.58 kg (16.7 lb), fully loaded
HP ProCurve Switch 2610-24/12PWR
4.39 x 44.2 x 23.62 cm (1.73 x 17.4 x 9.3 in) (1U height)
3.4 kg (7.5 lb)

top

Electrical specifications

Model
Feature
Maximum heat dissipation
Voltage
Frequency
Current
Maximum power rating
HP ProCurve Switch 2610-481
300.67 kJ/hr (285 BTU/hr )
100 - 127/200 - 240 V ac
50/60 Hz
1.3/0.8 A
66 W
HP ProCurve Switch 2610-241
149.81 kJ/hr (142 BTU/hr)
0.8/0.4 A
41 W
HP ProCurve Switch 2610-24-PWR2
432.55 kJ/hr (410 BTU/hr, (switch-only BTU/hr: 410; combined switch + max. PoE devices at 15.4 W: 2281 BTU/hr )
7.0/3.5 A
77 W
HP ProCurve Switch 2610-48-PWR3
432.55 kJ/hr (410 BTU/hr), (switch-only BTU/hr: 410; combined switch + max. PoE devices at 15.4 W: 2281 BTU/hr)
96 W
HP ProCurve Switch 2610-24/12PWR4
190.96 kJ/hr (181 BTU/hr ), (switch-only BTU/hr: 181; combined switch + max. PoE devices at 15.4 W: 827 BTU/hr)
2.5/1.3 A
62 W
NOTE:
  • 1: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
  • 2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Power consumption: 77 W without PoE; 527 W with PoE.
  • 3: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Power consumption: 96 W without PoE; 590 W with PoE.
  • 4: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Power consumption: 62 W without PoE; 189 W with PoE.

top

Environmental specifications

Feature
Description
Operating temperature
0º to 50ºC (32º to 122ºF)
Operating relative humidity
15% to 95% @ 40ºC (104ºF), non-condensing
Non-operating/Storage temperature
-40º to 70ºC (-40º to 158ºF)
Non-operating/Storage relative humidity
15% to 90% @ 65ºC (149ºF), non-condensing
Altitude
Up to 3 km (10,000 ft)
Acoustic
HP ProCurve Switch 2610-48
Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19 per ISO 7779
HP ProCurve Switch 2610-24
Power: 0 dB, Pressure: 0 dB No Fan
HP ProCurve Switch 2610-24-PWR
Power: 64 dB, Pressure: 57 dB; DIN 45635T.19 per ISO 7779
HP ProCurve Switch 2610-48-PWR
Power: 63.6 dB, Pressure: 56.6 dB; DIN 45635T.19 per ISO 7779
HP ProCurve Switch 2610-24/12PWR
Power: 46 dB, Pressure: 38.4 dB; DIN 45635T.19 per ISO 7779

top

Technical specifications

Feature
Description
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Memory and processor
HP ProCurve Switch 2610-48/2610-48-PWR
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 2 MB
HP ProCurve Switch 2610-24/2610-24-PWR/2610-24/12PWR
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 1 MB
Performance
HP ProCurve Switch 2610-48/2610-48-PWR
  • 100 Mb Latency: < 6.2 µs (LIFO)

  • 1000 Mb latency: < 4.4 µs (LIFO)

  • Throughput: Up to 13.0 million pps

  • Routing/switching capacity: 17.6 Gb/s

  • MAC address table size: 8,000 entries

HP ProCurve Switch 2610-24/2610-24-PWR/2610-24/12PWR
  • 100 Mb Latency: < 4.1 µs (LIFO)

  • 1000 Mb latency: < 2.9 µs (LIFO)

  • Throughput: Up to 9.5 million pps

  • Routing/switching capacity: 12.8 Gb/s

  • MAC address table size: 8,000 entries

Ports
HP ProCurve Switch 2610-48/2610-48-PWR
  • 48 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)

  • Media type: Auto-MDIX

  • Duplex: half or full

  • 1 RJ-45 serial console port

  • 2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 2 open mini-GBIC (SFP) slots

HP ProCurve Switch 2610-24/2610-24-PWR/2610-24/12PWR
  • 24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)

  • Media type: Auto-MDIX

  • Duplex: half or full

  • 1 RJ-45 serial console port

  • 2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 2 open mini-GBIC (SFP) slots

top

Safety certifications

Feature
Description
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
  • EN: EN 55024, CISPR 24

  • ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD

  • Radiated: IEC 61000-4-3; 3 V/m

  • EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

  • Surge: IEC 61000-4-5; 1 kV/2 kV AC

  • Conducted: IEC 61000-4-6; 3 V

  • Power frequency magnetic field: IEC 61000-4-8; 1A/m,50 or 60 Hz

  • Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

  • Harmonics: EN 61000-3-2, IEC 61000-3-2

  • Flicker: EN 61000-3-3, IEC 61000-3-3

Safety
CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950

top

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HP ProCurve Switch 2610 Series - Specifications
Document ID: emr_na-c02507262-1
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.