Print | Rate this content

HPE ProLiant DL360 Gen9 Server - Removing and Replacing the Access panel

This document pertains only to HPE ProLiant DL360 Gen9 Server with the following case design:

Introduction

This document is provided to assist in removing and replacing the access panel for the HPE ProLiant DL360 Gen9 Server.

top

Access panel removal instructions

To view a video demonstrating the procedure for removing the access panel, click here to view the HPE Services Media Library , and then select Servers, ProLiant DL Servers, and HPE ProLiant DL360 Gen9 Server, and then click on Remove/Replace. On the new window, select access panel from the menu on the upper left hand side of the screen.

Click here to access the video from HPE Services Media Library .

Review the safety considerations before performing the steps listed below by clicking on the following link:

Click here to view the precautions .

Step
Procedure
Instruction
1
Press the power button to put the server in standby.
2
Disconnect the power cord from the server.
3
If necessary, unlock the access panel latch with a Torx T-15 screwdriver.
4
Pull up on the latch to disengage the access panel from the chassis.
5
Lift the access panel up and off the chassis.

top

Access panel replacement instructions

Step
Procedure
Instruction
1
Ensure the access panel latch is in the open position.
2
Align the guide pins on the access panel with the slots on the sides of the chassis.
3
Lower the access panel and slide it toward the front of the chassis.
4
Close the access panel latch.
5
If necessary, lock the access panel latch with a Torx T-15 screwdriver.

top

Parts return

If the part requires return refer the below site for more details.

Click here for the defective parts return procedure .

Click here to access Hewlett Packard Enterprise Parts Store .

top

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HPE ProLiant DL360 Gen9 Server - Removing and Replacing the Access panel
Document ID: emr_na-a00046877en_us-3
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.