Print | Rate this content

Notice: HPE B-series Fabric Operating System 7.4.1c Firmware Release for Select HP B-series SAN Switches

SUPPORT COMMUNICATION - CUSTOMER NOTICE

Document ID: c05164378

Version: 1

Notice: HPE B-series Fabric Operating System 7.4.1c Firmware Release for Select HP B-series SAN Switches
NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice.

Release Date: 2016-06-06

Last Updated: 2016-06-06


DESCRIPTION

This notice announces the release of HPE B-series Fabric Operating System (FOS) 7.4.1c firmware for select HPE B-series SAN switches.

DETAILS

FOS v7.4.1c is a patch release based on FOS v7.4.1b. All hardware platforms and features supported in FOS v7.4.1b are also supported in FOS v7.4.1c. This release also contains issue resolutions including those from the FOS v7.4.1b release.

Resolution of Important Issues:

  • DEFECT000567817 - Firmware upgrade fails on a director with the standby CP remaining in a constant powering up state.
  • DEFECT000577166 - F_Ports went into In_sync state or route error triggered on Eport trunk causing frame drop during a firmware upgrade.
  • DEFECT000577864 - Multiple N-Port failovers on AG switch cause LUNs to disappear.
  • DEFECT000576240 - CVE-2015-7575: TLS 1.2 Transcipt Collision attacks against MD5 in key exchange protocol (SLOTH).
  • DEFECT000580882 - CVE-2015-3194: OpenSSL Certificate verify crash with missing PSS parameter.
NOTE: See the HPE B-series FOS 7.4.1c Release Notes for complete details of the issue resolutions, as well as other important information related to the FOS 7.4.1c firmware.

To obtain the HPE B-series FOS 7.4.1c firmware and to view the Release Notes, see the HPE Support Center website:

http://www.hpe.com/support

  1. Select HPE Servers, Storage and Networking under Product Support.
  2. Search for your HP StoreFabric B-series switch model.
  3. Select Get drivers, software & firmware
  4. Click Firmware under OS Independent Downloads.
  5. To read the Brocade Release Notes, click the Manuals link under the Knowledge Base tab.
  6. To read the HPE Release Notes, click the Release Notes tab in the firmware download page.
  7. Also, in the Manuals section, see the Fabric OS Administrator’s Guide for a description of the process to verify the firmware download is complete.
NOTE: The B-series switch streams list all of the currently active FOS versions. For the latest product support information, see the Single Point of Connectivity Knowledge (SPOCK) on the HPE website: http://www.hpe.com/storage/spock

You must sign up for an HPE Passport to access this website.

RECEIVE PROACTIVE UPDATES : Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively in your e-mail through HPE Subscriber's Choice. Sign up for Subscriber's Choice at the following URL: Proactive Updates Subscription Form


Hardware Platforms Affected: StoreFabric B-series Switches
Operating Systems Affected: Not Applicable
Software Affected: Not Applicable
Support Communication Cross Reference ID: IA05164378
©Copyright 2016 Hewlett Packard Enterprise Company, L.P.
Hewlett Packard Enterprise Company shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law, neither HPE nor its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages including downtime cost; lost profits; damages relating to the procurement of substitute products or services; or damages for loss of data, or software restoration. The information in this document is subject to change without notice. Hewlett Packard Enterprise Company and the names of Hewlett Packard Enterprise Company products referenced herein are trademarks of Hewlett Packard Enterprise Company in the United States and other countries. Other product and company names mentioned herein may be trademarks of their respective owners.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: Notice: HPE B-series Fabric Operating System 7.4.1c Firmware Release for Select HP B-series SAN Switches
Document ID: emr_na-c05164378-1
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.