Print | Rate this content

HP ProCurve Switch 2810 Series - Specifications

Physical specifications

HP ProCurve Switch 2810-24G

HP ProCurve Switch 2810-48G

HP ProCurve Switch 2810-24G
Feature
Description
Dimensions (H x W x D)
4.32 x 44.2 x 32.26 cm (1.7 x 17.4 x 12.7 in) (1U height)
Weight
3.27 kg (7.21 lb)
HP ProCurve Switch 2810-48G
Feature
Description
Dimensions (H x W x D)
4.32 x 44.2 x 32.26 cm (1.7 x 17.4 x 12.7 in) (1U height)
Weight
3.9 kg (8.6 lb)

top

Electrical specifications

HP ProCurve Switch 2810-24G

HP ProCurve Switch 2810-48G

HP ProCurve Switch 2810-24G
Feature
Description
Maximum heat dissipation1
173 kJ/hr (164 BTU/hr)
Voltage
100 - 127/200 - 240 V ac
Current
1.0 A
Power consumption1
48 W
Frequency
50/60 Hz
NOTE: 1: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
HP ProCurve Switch 2810-48G
Feature
Description
Maximum heat dissipation2
360 kJ/hr (341 BTU/hr)
Voltage
100 - 127/200 - 240 V ac
Current
1.5 A
Power consumption2
92 W
Frequency
50/60 Hz
NOTE: 2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

top

Environmental specifications

Feature
Description
Operating temperature
0º to 45ºC (32º to 113ºF)
Operating relative humidity
15% to 95% @ 40°C (104°F), non-condensing
Non-operating/storage temperature
-40° to 70°C (-40° to 158°F)
Non-operating/storage relative humidity
15% to 95% @ 65°C (149°F), non-condensing
Altitude
Up to 3 km (10,000 ft)
Acoustic
HP ProCurve Switch 2810-24G:
  • Power: 40.3 dB

HP ProCurve Switch 2810-48G:
  • Power: 40.5 dB

top

Technical specifications

HP ProCurve Switch 2810-24G

HP ProCurve Switch 2810-48G

HP ProCurve Switch 2810-24G
Feature
Description
Memory and processor
MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size: 0.75 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
  • Latency: < 5.6 µs (FIFO 64 byte packets)

  • Throughput: Up to 35.7 million pps

  • Switching capcity: 48 Gb/s

  • MAC address table size: 8,000 entries

Ports
  • 20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)

  • Media type: IEEE Auto-MDIX

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 1 RJ-45 serial console port

  • 4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers).

HP ProCurve Switch 2810-48G
Feature
Description
Memory and processor
MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size: 1.5 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
  • Latency: < 5.4 µs (FIFO 64 byte packets)

  • Throughput: Up to 71.4 million pps

  • Switching capcity: 96 Gb/s

  • MAC addresstable size: 8,000 entries

Ports
  • 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)

  • Media type: IEEE Auto-MDIX

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 1 RJ-45 serial console port

  • 4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers).

top

Safety certifications

Feature
Description
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; IEC/EN 61000-3-2; IEC/EN 61000-3-3
Immunity
  • EN: EN 55024, CISPR 24

  • ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD

  • Radiated: IEC 61000-4-3; 3 V/m

  • EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

  • Surge: IEC 61000-4-5; 1 kV/2 kV AC

  • Conducted: IEC 61000-4-6; 3 V

  • Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz

  • Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

  • Harmonics: EN 61000-3-2, IEC 61000-3-2

  • Flicker: EN 61000-3-3, IEC 61000-3-3

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Document title: HP ProCurve Switch 2810 Series - Specifications
Document ID: emr_na-c02504728-3
How helpful was this document?
How can we improve this document?
Note: Only English language comments can be accepted at this time.
Please wait while we process your request.