Configuring server lock settings

Procedure

  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Server Configuration Lock Settings.

    The Server Configuration Lock State status appears on the screen.

  2. You can change the following options:

    • Server Configuration Lock Challenge required: Select Enabled or Disabled.

    • Prepare system for Transport: Select Enabled or Disabled.

    • Halt on Server Configuration Lock failure detection: Select Enabled or Disabled.

  3. Save the settings.
    IMPORTANT
    Server Configuration Lock Settings option is not supported on HPE Gen11 servers using Ampere processors.