MR Storage Administrator properties
| Properties | Description |
|---|---|
| Status | The status of the drive. |
| Exposed As |
To differentiate the drives, the drives are exposed as one of the following drive:
|
| Product ID | The product ID of the drive. |
| Vendor ID | The ID assigned to the drive by the vendor. |
| Serial Number | The serial number of the drive. |
| Shield Counter | The shield counter value. |
| Device ID | The device ID of the drive assigned by the manufacturer. |
| Usable Capacity | The usable storage capacity, based on the RAID level used. |
| Raw Capacity | The actual full capacity of the drive before any coercion mode is applied to reduce the capacity. |
| General Properties | |
| SAS Address 0 | The World Wide Name (WWN) for the drive. |
| SAS Address 1 | The World Wide Name (WWN) for the drive. |
| Negotiated Link Speed | The negotiated link speed for data transfer to and from the drive. |
| Drive Speed | The speed of the drive. |
| Temperature | The temperature of the drive. |
| Revision Level | The revision level of the firmware of the drive. |
| Power Status | The Power Status displays the following status:
|
| Native Command Queueing | Indicates if the Native Command Queueing function is enabled. Native Command Queueing enables the drive to queue the I/O requests and reorder them for efficiency. |
| Sector Size | The size of the sector of the drive. The possible options are 4 KB or 512 KB. |
| Enclosure Properties | |
| Enclosure ID | The ID of the enclosure in which the drive is located. |
| Enclosure Location | The port number of the enclosure to which the drive is connected. |