Connecting to HPE StoreEasy 1000 Storage using iLO

About this task

Access StoreEasy 1000 Storage using the iLO remote management method:

Procedure

  1. Connect a network cable to the iLO port on the back of the StoreEasy 1000 Storage system.
  2. Connect a power cable to StoreEasy 1000 Storage.
  3. Locate the iLO Network Settings tag attached to the StoreEasy 1000 Storage and record the default user name, password, and DNS name.
  4. From a remote computer, open a standard web browser and enter the iLO management hostname of the StoreEasy 1000 Storage.
    NOTE:

    By default, iLO obtains the management IP address and subnet mask from your networks DHCP server. The hostname found on the iLO tag is automatically registered with your networks DNS server. If the DHCP configuration is not possible or the system is not found in DNS, use the direct attach method to configure iLO with a static IP address.

  5. Using the default user information provided on the iLO Network Settings tag, log on to iLO, and then launch a remote console to StoreEasy 1000 Storage.