System recovery of HPE StoreEasy 1000 Storage using the iLO Remote Control method

Prerequisites

Download the latest release image from the HPE support center to a network share or computer that is on the same network segment where the system that must be restored is located.

Procedure

  1. Log in to iLO using your Administrator credentials for iLO.
  2. Start a remote console session using one of the methods available (.net, HTML5, Java).
  3. Once connected to the remote console session, select Virtual drives > Image file and then select the ISO image that you downloaded earlier.
  4. Reboot the system and select F11 during the reboot.
  5. Select the iLO virtual drive from the list and press any key to boot from USB when it prompts on the console.
  6. A menu will appear on the screen. Select the HPE System Recovery and follow the prompts to restore your system. Typical installation time is less than 1 hour, depending upon your network congestion and speed.