LED indicators in the HPE StoreEasy Storage system | Information Center for HPE StoreEasy 1000 Storage

HPE StoreEasy 1470 LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1470 Storage system.

HPE StoreEasy 1570 LED indications

When all three LEDs (Power On/Standby button and system power LED, Health LED, and NIC status LED) and the UID button/LED on the rear panel flash simultaneously, a power fault has occurred in the HPE StoreEasy 1570 Storage system.

HPE StoreEasy 1670 LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1670 Storage system.

HPE StoreEasy 1670 Expanded LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1670 Expanded Storage system.

HPE StoreEasy 1870 LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1870 Storage system.

HPE StoreEasy 1460 LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1460 Storage system.

HPE StoreEasy 1560 LED indications

When all three LEDs (Power On/Standby button and system power LED, Health LED, and NIC status LED) and the UID button/LED on the rear panel flash simultaneously, a power fault has occurred in the HPE StoreEasy 1560 Storage system.

HPE StoreEasy 1660 and 1860 LED indications

When all four LEDs (UID button/LED, NIC status LED, Health LED, and Power On/Standby button and system power LED) flash simultaneously, a power fault has occurred in the HPE StoreEasy 1660 and 1860 Storage systems.

Front panel LEDs


LED Status and Color	Identification and action
UID button/LED is solid blue.	Activated
UID button/LED is flashing blue at 1 Hz/cycle per second.	Remote management or firmware upgrade in progress
UID button/LED is flashing blue at 4 Hz/cycle per second.	iLO manual reboot sequence initiated
UID button/LED is flashing blue at 8 Hz/cycle per second.	iLO manual reboot sequence in progress
UID button/LED is off.	Deactivated
NIC status LED is solid green.	Link to network
NIC status LED is flashing green.	Network active
NIC status LED is off.	No network activity
Health LED is solid green.	Normal
Health LED is flashing green.	iLO is rebooting
Health LED is flashing amber.	System degraded. Review the system IML or use iLO to review the system health status.
Health LED is flashing red.	System critical. Review the system IML or use iLO to review the system health status.
Power On/Standby button and system power LED is solid green.	System on
Power On/Standby button and system power LED is flashing green.	Performing power-on sequence
Power On/Standby button and system power LED is solid amber.	System in standby
Power On/Standby button and system power LED is off.	No power. Check the following: Facility power is present. Power cord is attached. Power supplies are installed. Power supply failure has occurred. The front I/O cable is connected for HPE StoreEasy 1560 Storage system. Power button cable is disconnected.


Subsystems	Number of LED Flashes	Action
System board	1	Open a technical support case with HPE Support Center.
Processor	2	Open a technical support case with HPE Support Center.
Memory	3	Open a technical support case with HPE Support Center.
Riser board PCIe slots	4	Open a technical support case with HPE Support Center.
FlexibleLOM	5	Open a technical support case with HPE Support Center.
Removable HPE Flexible Smart Array controller/Smart SASHBA controller	6	Open a technical support case with HPE Support Center.
System board PCIe slots	7	Open a technical support case with HPE Support Center.
Power backplane or storage backplane	8	Open a technical support case with HPE Support Center.
Power supply	9	Verify that both power supplies are plugged into the power source and are operational. If the power supplies are not operational, then open a technical support case with HPE Support Center.

Rear panel LEDs


LED status and color	Identification and action
UID LED is solid blue.	Activated
UID LED is flashing blue.	System being managed remotely
UID LED is off.	Deactivated
iLO 5/standard NIC activity LED is solid green or flashing green.	Network active
iLO 5/standard NIC activity LED is off.	No network activity.
iLO 5/standard NIC link LED is solid green.	Link active
iLO 5/standard NIC link LED is off.	No link activity
Power supply 1 and 2 LED are solid green.	Power supply in normal state
Power supply 1 and 2 LED are off.	One or more of the following has occurred: AC power is unavailable. Power supply has failed. Power supply is in standby mode. Power supply has exceeded current limit.